Commit graph

23 commits

Author SHA1 Message Date
Mike Frysinger
1a95d89f69 Blackfin: bf537-stamp: drop board reset workaround
The bf537-stamp shouldn't need this SPI flash workaround.  It was added
by accident a long time ago through a convoluted series of steps which
originated from a customer board (not the bf537-stamp).  So drop it to
keep people from incorrectly adding it to their own boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:03:25 -05:00
Mike Frysinger
3f390e15a7 Blackfin: bf537-stamp: use common spi boot workaround code
The common gpio code provides a function for handling the spi boot
workaround logic, so switch over to that rather than bang on the
gpio MMRs directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-05 05:30:08 -04:00
Mike Frysinger
fa45bd498a Blackfin: kill off useless initdram() usage
While the initdram() function makes sense on some arches, it doesn't for
Blackfin systems as it's always implemented the same way.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Mike Frysinger
d248cfb2d9 Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:42:00 -04:00
Mike Frysinger
4de1a5daab Blackfin: bf537-stamp: split post code out into dedicated post.c
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-24 20:36:31 -04:00
Mike Frysinger
751e54c3b7 Blackfin: bf537-stamp: rewrite MAC-in-flash handling
Use the common net eth functions to setup the env/global data with the MAC
address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-24 20:36:29 -04:00
Wolfgang Denk
ee924e0030 Merge branch 'master' of git://git.denx.de/u-boot-net 2009-02-01 21:31:37 +01:00
Mike Frysinger
75edebe301 Move is_valid_ether_addr() to include/net.h
Import the is_valid_ether_addr() function from the Linux kernel.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-01-28 23:59:27 -08:00
Mike Frysinger
41f3325ae9 Blackfin: drop dead/wrong debug code in initdram()
The DEBUG code in initdram() is quite old and was never really useful, so
just drop it altogether.  Common Blackfin debug code does a better job.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:13 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Ben Warren
89973f8a82 Introduce netdev.h header file and remove externs
This addresses all drivers whose initializers have already
been moved to board_eth_init()/cpu_eth_init().

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Ben Warren
914947313a Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
Added board_eth_init() function to bf537-stamp board.
Removed initialization for the Blackin EMAC driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:17:36 -07:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Mike Frysinger
9171fc8172 Blackfin: unify cpu and boot modes
All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-30 15:50:19 -04:00
Mike Frysinger
f7ce12cb65 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
Stop tying things to the processor that should be tied to other defines and
change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
system to select the -mcpu option.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-15 22:14:14 -04:00
Mike Frysinger
86a20fb920 Blackfin: move bootldr command to common code
This moves the Blackfin-common bootldr command out of the BF537-STAMP
specific board directory and into the common directory so that all Blackfin
boards may utilize it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-15 22:13:58 -04:00
Mike Frysinger
d4d7730853 punt Blackfin VDSP headers and import sanitized/auto-generated ones
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04 19:26:55 -05:00
Jean-Christophe PLAGNIOL-VILLARD
b8f4162a4f bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
and move is_valid_ether_addr board file

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 17:46:32 -05:00
Wolfgang Denk
1218abf1b5 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-15 20:48:41 +02:00
Jon Loeliger
fcec2eb93e board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:47:45 -05:00
Jon Loeliger
5e378003d5 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:34:58 +02:00
Aubrey Li
155fd76657 [Blackfin][PATCH] Fix copyright and update license 2007-04-05 18:31:18 +08:00
Aubrey Li
26bf7deca3 [Blackfin][PATCH] Add BF537 stamp board support 2007-03-19 01:24:52 +08:00