Commit graph

108 commits

Author SHA1 Message Date
Mike Frysinger
314f634b48 image/fit: drop inline markings on parser code
Putting "inline" on extern funcs makes no sense, so drop them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:38:54 +02:00
Marek Vasut
57d40ab70b RAMDISK: Fix unused variable issue caused by raw rd support
image.c: In function ‘boot_get_ramdisk’:
image.c:800:8: warning: unused variable ‘end’ [-Wunused-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2012-03-30 23:52:35 +02:00
Marek Vasut
017e1f3f9f BOOT: Add RAW ramdisk support to bootz
This patch allows loading RAW ramdisk via bootz command. The raw ramdisk is
loaded only in case it's size is specified:

  bootz <kernel addr> <ramdisk addr>:<ramdisk size> <fdt addr>

For example:

  bootz 0x42000000 0x43000000:0x12345 0x44000000

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Tom Warren <TWarren@nvidia.com>
Cc: albert.u.boot@aribaud.net
Cc: afleming@gmail.com
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2012-03-30 23:00:47 +02:00
Simon Glass
770605e4f9 bootstage: Replace show_boot_progress/error() with bootstage_...()
These calls should not be made directly any more, since bootstage
will call the show_boot_...() functions as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:41:39 +01:00
Simon Glass
aacc8c16ee bootstage: Convert FIT progress numbers to enums
This changes over all the FIT image progress numbers to use enums
from bootstage.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:33:32 +01:00
Simon Glass
5e41088364 bootstage: Convert progress numbers 10-19 to enums
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:59:53 +01:00
Simon Glass
5dc887164e bootstage: Convert progress numbers 1-9 into enums
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 20:57:37 +01:00
Simon Glass
5ddb118da4 bootstage: Use show_boot_error() for -ve progress numbers
Rather than the caller negating our progress numbers to indicate an
error has occurred, which seems hacky, add a function to indicate this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:56:00 +01:00
Stephen Warren
e37ae40e9d image: Support FDTs already loaded at their load address
boot_get_fdt() expects a uImage-wrapped FDT to be loaded to a staging
location, and then memmove()s it to the load address specified in the
header. This change enhances boot_get_fdt() to detect when the image has
already been loaded to the correct address, and skip this memmove(). The
detection algorithm was written to match the equivalent for the kernel;
see bootm_load_os()'s IH_COMP_NONE case.

v2: New patch

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-03-06 22:18:48 +01:00
Shawn Guo
fa34f6b25b common/image.c: align usage of fdt_high with initrd_high
The commit message of a28afca (Add uboot "fdt_high" enviroment variable)
states that fdt_high behaves similarly to the existing initrd_high.
But fdt_high actually has an outstanding difference from initrd_high.
The former specifies the start address, while the later specifies the
end address.

As fdt_high and initrd_high will likely be used together, it'd be nice
to have them behave same.  The patch changes the behavior of fdt_high
to have it aligned with initrd_high.

The document of fdt_high in README is updated with an example to
demonstrate the usage of this environment variable.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Simon Glass <sjg@chromium.org>
2012-02-27 21:19:24 +01:00
Stefan Kristiansson
3ddcaccda3 openrisc: Add architecture image support
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2012-01-13 21:16:40 +01:00
Kumar Gala
3b2001105f powerpc/bootm: Flush ramdisk and device tree image when booting on MP
We already flush the kernel image after we've loaded it to ensure
visiblity to the other cores.  We need to do the same thing for the
ramdisk and device tree images.  In AMP boot scenarios we might not be
HW cache coherent with the secondary core that we are loading and
setting the ramdisk and device tree up for.  Thus we need to ensure
we've flushed the regions of memory utilized by ramdisk and device tree
so the loadding and any modifications (from decompression or fdt updates)
are made visible to the secondary cores.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-12 08:17:52 +01:00
Stephen Warren
b9b50e89d3 image: Implement IH_TYPE_KERNEL_NOLOAD
The legacy uImage format includes an absolute load and entry-point
address. When bootm operates on a kernel uImage in memory that isn't
loaded at the address in the image's load address, U-Boot will copy
the image to its address in the header.

Some kernel images can actually be loaded and used at any arbitrary
address. An example is an ARM Linux kernel zImage file. To represent
this capability, IH_TYPE_KERNEL_NOLOAD is implemented, which operates
just like IH_TYPE_KERNEL, except that the load address header is
ignored, and U-Boot does not copy the image to its load address, but
rather uses it in-place.

This is useful when sharing a single (uImage-wrapped) zImage across
multiple boards with different memory layouts; in this case, a specific
load address need not be picked when creating the uImage, but instead
is selected by the board-specific U-Boot environment used to load and
boot that image.

v2: Rename from IH_TYPE_KERNEL_ANYLOAD to IH_TYPE_KERNEL_NOLOAD.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-12-01 09:45:35 +01:00
Stefano Babic
4962e38e9a mkimage: adding support for Davinci AIS image
Some Davinci processors supports the Application
Image Script (AIS) boot process. The patch adds the generation
of the AIS image inside the mkimage tool to make possible
to generate a bootable U-boot without external tools
(TI Davinci AIS Generator).

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
2011-10-23 23:34:21 +02:00
Stephen Warren
712fbcf384 checkpatch whitespace cleanups
This avoids the following checkpatch warning in later patches:

ERROR: "(foo*)" should be "(foo *)"
ERROR: space required before the open brace '{'
ERROR: space prohibited before that close parenthesis ')'
ERROR: spaces required around that '||' (ctx:WxV)
WARNING: space prohibited between function name and open parenthesis '('
WARNING: line over 80 characters

This fixes all the white-space warnings/errors in my subsequent patch,
and within this current patch. A number of other checkpatch warnings
and errors are still present in this patch itself, but are beyond simple
whitespace fixes, so are not solved by this patch.

v2: New patch

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2011-10-22 01:13:35 +02:00
Macpaul Lin
64d614617f nds32: common bdinfo, bootm, image support
Add support of NDS32 to common commands bdinfo, bootm, and image format.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22 00:54:06 +02:00
Simon Glass
0ec2ce4a67 Fix use of int as pointer in image.c
It is better to use %p in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17 22:46:13 +02:00
Wolfgang Denk
e42624bbe0 common/image.c: remove duplicated IH_TYPE entries.
Also rearrange IH_TYPE table slightly.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-09 23:24:47 +02:00
Wolfgang Denk
26e670ea43 ARM: remove broken "evb4510" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>
2011-09-07 21:46:39 +02:00
John Rigby
3decb14abe mkimage: Add OMAP boot image support
- Add mkimage support for OMAP boot image
- Add support for OMAP boot image(MLO) generation in the new
  SPL framework

Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-08-03 12:49:20 +02:00
Heiko Schocher
7816f2cf81 mkimage: add UBL header support for booting davinci cpus
creating an u-boot.ubl file, which contains the UBL Header
needed for booting from NAND with the RBL from TI. For more
information read doc/README.ublimage.

Signed-off-by: Heiko Schocher <hs@denx.de>
2011-07-28 16:52:41 +02:00
Matthew McClintock
1bb5e9071f Fix typo from 'mb_alloc' -> 'lmb_alloc'
Signed-off-by: Matthew McClintock <msm@freescale.com>
2011-07-19 10:38:33 +02:00
David A. Long
a28afca57d Add uboot "fdt_high" enviroment variable
Add a new "fdt_high" enviroment variable. This can be used to control (or prevent) the
relocation of the flattened device tree on boot. It can be used to prevent relocation
of the fdt into highmem.  The variable behaves similarly to the existing "initrd_high"
variable.

Signed-off-by: David A. Long <dave.long@linaro.org>
2011-07-16 11:58:30 -04:00
Grant Likely
55b0a39314 Respect memreserve regions specified in the device tree
If a regions is reserved in the fdt, then it should not be used.  Add
the memreserve regions to the lmb so that u-boot doesn't use them to
store the initrd.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:21 -04:00
Grant Likely
ed59e58786 Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ
The previous patch makes u-boot use the full accessible size of ram as
the default boot mapped size if CONFIG_SYS_BOOTMAPSZ is not defined,
which means boot_relocate_fdt() can be changed to depend solely on
CONFIG_OF_LIBFDT.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:20 -04:00
Grant Likely
c3624e6ed0 Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not defined
This patch adds a function getenv_bootm_mapsize() for obtaining the
size of the early mapped region accessible by the kernel during early
boot.  It defaults to CONFIG_SYS_BOOTMAPSZ, or if not defined,
defaults to getenv_bootm_size(), which in turn defaults to the size of
RAM.

getenv_bootm_mapsize() can also be overridden with a "bootm_mapsize"
environmental variable.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:20 -04:00
Grant Likely
590d3cacb9 Stop passing around bootmem_base value.
For the calls to boot_relocate_fdt(), boot_get_cmdline(), and
boot_get_kbd(), the value of bootmem_base is always obtained by
calling getenv_bootm_low().  Since the value always comes from the
same source, the calling signature for those functions can be
simplified by making them call getenv_bootm_low() directly.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:19 -04:00
Mike Frysinger
7edb186fcf image: constify lookup tables
These are pure lookup tables -- no need to be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:58:27 +01:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Timur Tabi
43b08af53e always relocate fdt into an lmb-allocated memory block
The device tree (fdt) must always exist in within the bootmap (usually the
first 16MB of RAM).  If it doesn't, then boot_relocate_fdt() will allocate
an LMB region in the bootmap and copy the fdt into that region.  It will
also increase the size of the fdt.

If the fdt is already in the bootmap, then previously the memory was just
reserved.  There was no contingency if the reservation failed, however.

By always allocating an lmb region and copying/resizing the fdt into that
region, the code is simplified and the memory region is always allocated
properly.

Also change the types of some variables to avoid some typecasts.

Signed-off-by: Timur Tabi <timur@freescale.com>
Tested-by: Ira Snyder <iws@ovro.caltech.edu>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20 02:28:00 -05:00
John Rigby
fca43cc801 boot: change some arch ifdefs to feature ifdefs
The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
are currently enabled by various combinations of CONFIG_M68K,
CONFIG_POWERPC and CONFIG_SPARC.

Use CONFIG_SYS_BOOT_<FEATURE> defines instead.

CONFIG_SYS_BOOT_RAMDISK_HIGH
CONFIG_SYS_BOOT_GET_CMDLINE
CONFIG_SYS_BOOT_GET_KBD

Define these as appropriate in arch/include/asm/config.h files.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:53:32 +02:00
John Rigby
d1263fced2 common/image.c remove extra calls to be32_to_cpu in boot_get_fdt
fdt_totalsize returns size in cpu endian so don't call be32_to_cpu
on the result.  This was harmless on big endian platforms but not
on little endian ARMs.

Signed-off-by: John Rigby <john.rigby@linaro.org>
2010-10-18 22:50:17 +02:00
John Rigby
758b39979d common/image.c fix length calculation in boot_relocate_fdt
boot_relocate_fdt is called on platforms with CONFIG_SYS_BOOTMAPSZ
defined to relocate the device tree blob to be inside the
boot map area between bootmap_base and bootmap_base+CONFIG_SYS_BOOTMAPSZ.

For the case where the blob needs to be relocated, space is
allocated inside the bootmap by calling lmb_alloc_base with
size passed in plus some padding:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

For the case where the blob is already inside the bounds of the boot map
area, lmb_reserve is called to reserve the the space where the blob is
already residing.  The calculation for this case is currently:

    of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;

This is wrong because it reserves all the space in the boot map area
from the blob to the end ignoring completely the actual size. The
worst case is where the blob is at the beginning and the entire boot map
area get reserved. Fix this by changing the length calculation to this:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

This bug has likely never manifested itself because bootm has never
been called with the fdt blob already in the bootmap area.  In my
testing on an OMAP3 beagle board I initially worked around the bug
by simply moving the initial location of the fdt blob.  I have tested
with the new calculation with the fdt blob both inside and outside
the boot map area.

Signed-off-by: John Rigby <john.rigby@linaro.org>
2010-10-18 22:49:47 +02:00
Torkel Lundgren
3df6195793 Add support for operating system OSE
Add OSE as operating system for mkimage and bootm.

Signed-off-by: Torkel Lundgren <torkel.lundgren@enea.com>
2010-09-28 14:42:26 +02:00
Stephan Linz
958e120643 fdt relocate: have more attention to use a bootmap or not
Platforms with flat device tree support can use a bootmap to relocate
the fdt_blob. This is not a must. That's why the relocation function
boot_relocate_fdt() should be use only if CONFIG_OF_LIBFDT was defined
together with CONFIG_SYS_BOOTMAPSZ (see common/cmd_bootm.c).

On MicroBlaze platforms there is no need to use a bootmap to relocate
a fdt blob. So we need a more precise focus on the compilation and usage
of boot_relocate_fdt().

In general it is valid to exclude the function boot_relocate_fdt() if
the bootmap size CONFIG_SYS_BOOTMAPSZ is not defined.

Signed-off-by: Stephan Linz <linz@li-pro.net>
2010-08-08 22:16:05 +02:00
Matthew McClintock
c519facc64 Fix condition where bootm_size not set and wrong memory size reported
If the user sets bootm_low and does not set bootm_size, u-boot will
report the memory node in the flat device tree incorrectly. Instead
of reporting the remaining size of memory, it will report the total
available memory which is incorrect.

Specifically this fixes the situation when booting a relocatable
kernel and the memory is reported as an offset and size in the
device tree, and the size needs to be adjusted accordingly.

Signed-off-by: Matthew McClintock <msm@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-07 21:55:03 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Thomas Chou
1117cbf2ad nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-28 10:56:04 -04:00
Larry Johnson
54fa2c5b51 Move test for unnecessary memmove to memmove_wd()
Signed-off-by: Larry Johnson <lrj@acm.org>
2010-05-06 00:38:06 +02:00
Stefano Babic
8edcde5e4e mkimage: Add Freescale imx Boot Image support (imximage)
This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25 23:58:29 +01:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Peter Korsgaard
20dde48bca add lzop decompression support
Add lzop decompression support to the existing lzo bitstream handling
(think gzip versus zlib), and support it for uImage decompression if
CONFIG_LZO is enabled.

Lzop doesn't compress as good as gzip (~10% worse), but decompression
is very fast (~0.7s faster here on a slow ppc). The lzop decompression
code is based on Albin Tonnerre's recent ARM Linux lzo support patch.

Cc: albin.tonnerre@free-electrons.com
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05 01:30:23 +01:00
Peter Tyser
521af04d85 Conditionally perform common relocation fixups
Add #ifdefs where necessary to not perform relocation fixups.  This
allows boards/architectures which support relocation to trim a decent
chunk of code.

Note that this patch doesn't add #ifdefs to architecture-specific code
which does not support relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:17:57 +02:00
Prafulla Wadaskar
aa0c7a86cd mkimage: Add Kirkwood Boot Image support (kwbimage)
This patch adds support for "kwbimage" (Kirkwood Boot Image)
image types to the mkimage code.

For details refer to docs/README.kwbimage

This patch is tested with Sheevaplug board

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-09-10 22:58:48 +02:00
Prafulla Wadaskar
b029dddc9a mkimage: Make table_entry code global
- make get_table_entry_id() global
- make get_table_entry_name() global
- move struct table_entry to image.h

Currently this code is used by image.c only.

This patch makes this API global so it can be used by other parts of
code, too.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron.debian.org>

Edit comments and commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Prafulla Wadaskar
f666dea8ab mkimage: Make genimg_print_size() global
Currently it is used by image.c only, but the the function can be
used to support additional mkimage types like for example kwbimage,
so make this function globally visible.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Wolfgang Denk
3a2003f61e tools/mkimage: fix compiler warnings, use "const"
This fixes some compiler warnings:
tools/default_image.c:141: warning: initialization from incompatible pointer type
tools/fit_image.c:202: warning: initialization from incompatible pointer type
and changes to code to use "const" attributes in a few places where
it's appropriate.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Scott Wood
e3d1ac7bb1 common/image.c: Relocate strings in tables.
Without this, u-boot can crash or print garbage if the original link
address no longer points to a valid string.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04 23:33:12 +02:00
Jean-Christophe PLAGNIOL-VILLARD
cd6734510a Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
FDT support is used for both FIT style images and for architectures
that can pass a fdt blob to an OS (ppc, m68k, sparc).

For other architectures and boards which do not pass a fdt blob to an
OS but want to use the new uImage format, we just need FIT support.

Now we can have the 4 following configurations :

1) FIT only             CONFIG_FIT
2) fdt blob only        CONFIG_OF_LIBFDT
3) both                 CONFIG_OF_LIBFDT & CONFIG_FIT
4) none                 none

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-12-13 23:31:49 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00