Commit graph

21 commits

Author SHA1 Message Date
Stefan Roese
834a45d7ee ppc4xx/POST: Add board specific UART POST test to lwmon5
Add CONFIG_POST_UART to implement a board specific UART POST test.
This is done since lwmon5 needs to set POST_ALWAYS to run this
test on each reboot. And we don't want to change the default
behavious of this this.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-20 10:08:08 +02:00
Anatolij Gustschin
29fd7ceb3c mpc5121: pdm360ng: add coprocessor POST
Adds coprocessor communication POST code

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 22:56:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Sascha Laue
5744ddc663 Configure DSP POST; add watchdog reset to diag command
Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
2008-06-29 19:19:35 +02:00
Yuri Tikhonov
7845d49094 POST: mark OCM test as POST_STOP
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-05-20 23:24:38 +02:00
Yuri Tikhonov
6e8ec68226 POST: OCM test added.
Added OCM test to POST layer. This version runs before all other tests
but doesn't yet interrupt post sequence on failure.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-05-20 23:24:37 +02:00
Yuri Tikhonov
6891260bdd POST: typo fix
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-05-20 23:22:52 +02:00
Yuri Tikhonov
0a51e9248e POST: preparations for moving CONFIG_POST to Makefiles
Remove CONFIG_POST ifdefs from the post/ source files.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-22 14:38:38 +02:00
Yuri Tikhonov
65b20dcefc The patch adds new POST tests for the Lwmon5 board.
These are:

* External Watchdog test;
* dsPIC tests;
* FPGA test;
* GDC test;
* Sysmon tests.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 21:59:23 +01:00
Yuri Tikhonov
8dc3b2303d Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
2008-03-18 21:59:23 +01:00
Larry Johnson
8dafa87476 Add attribute POST_PREREL to ECC memory POST
Signed-off-by: Larry Johnson <lrj@acm.org>
2008-02-07 00:22:59 +01:00
Stefan Roese
b2e2142c50 POST: Execute SPR test after relocation
On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
self modifying code and this doesn't work with stack in d-cache, since
I can't move the code from d-cache to i-cache. We move the SPR test to
be executed a little later, after relocation. Then stack is located in
SDRAM and this self-modifying code is no problem anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-09 10:38:58 +01:00
Pavel Kolesnikov
531e3e8b83 POST: Add ECC POST for the lwmon5 board
This patch adds ECC Post test for the Lwmon5 board based
on PPC440EPx to U-Boot.

Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-07-20 15:03:03 +02:00
Igor Lisitsin
a11e06965e Extend POST support for PPC440
Added memory, CPU, UART, I2C and SPR POST tests for PPC440.

Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--
2007-06-22 23:21:01 +02:00
wdenk
79fa88f3ed Patch by Pantelis Antoniou, 5 May 2004:
- Intracom board update.
- Add Codec POST.
2004-06-07 23:46:25 +00:00
wdenk
5a8c51cd5e * Patches by Pantelis Antoniou, 30 Mar 2004:
- add support for the Epson 156x series of graphical displays
    (These displays are serial and not suitable for using a normal
    framebuffer console on them)
  - add infrastructure needed in order to POST any DSPs in a board
2004-04-15 21:16:42 +00:00
wdenk
8564acf936 * Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
  - fix PVR values and clock generation for PowerQUICC II family
    (8270/8275/8280)

* Patch by Bernhard Kuhn, 08 Jul 2003:
  - add support for M68K targets

* Patch by Ken Chou, 3 Jul:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)

* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON
2003-07-14 22:13:32 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
wdenk
4532cb696e * LWMON extensions:
- Splashscreen support
  - modem support
  - sysmon support
  - temperature dependend enabling of LCD

* Allow booting from old "PPCBoot" disk partitions

* Add support for TQM8255 Board / MPC8255 CPU
2003-04-27 22:52:51 +00:00
wdenk
228f29ac6e * Improve log buffer code; use "loglevel" to decide which messages
to log on the console, too (like in Linux); get rid of "logstart"
2002-12-08 09:53:23 +00:00
wdenk
324f6cfd12 Initial revision 2002-10-07 21:13:39 +00:00