93b78f534a
Motion-PRO: Add support for the temperature sensor.
...
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:57:15 +02:00
c75e639630
Motion-PRO: Add displaying of CPLD revision information during boot.
...
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:55:23 +02:00
c99512d6bd
MPC5xxx: Change names of defines related to IPB and PCI clocks.
...
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:53:43 +02:00
a11c0b85dc
Motion-PRO: Add LED support.
...
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:51:48 +02:00
7d98ba770a
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
...
definition.
2007-05-10 16:55:52 +02:00
de1de02a7c
[Motion-PRO] Add support for I2C, EEPROM and RTC.
2007-05-08 13:05:44 +02:00
fa5c2ba123
[Motion-PRO] Add ATA support. Add CF-booting commands to the default
...
environment.
2007-05-08 10:23:56 +02:00
06241d50a3
[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
...
eliminates networking problems in Linux (timeouts).
2007-05-08 09:39:12 +02:00
1f1369c34b
[Motion-PRO] Enable Flat Device Tree support and modify default environment
...
to allow booting of FDT-expecting kernels.
2007-05-08 09:21:57 +02:00
53d4a4983f
[Motion-PRO] Preliminary support for the Motion-PRO board.
2007-02-09 10:45:42 +01:00
b78bb469f5
Merge with /home/tur/proj/idmr/u-boot
2007-01-24 10:26:47 +01:00
2daf046ba6
[iDMR] Add MTD and JFFS2 support, also add default partition definition.
2007-01-23 17:22:06 +01:00
0ed47bb119
[iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
...
"mii device" results in "Unexpected exception"). Fixing this properly
requires some clean-up in the FEC drivers infrastructure for ColdFire, so
this commit disables MII commads for now.
2007-01-23 14:11:22 +01:00
363d1d8f9c
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
...
Identification Register (CIR).
2007-01-23 13:25:22 +01:00
2ed5594649
Merge with /home/hs/SC3/u-boot-dev
2007-01-19 22:56:23 +01:00
f539b7ba7d
[PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-19 19:57:10 +01:00
d0b6e14087
[PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
...
if you must swap the bytes between reading/writing.
(Needed for the SC3 board)
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-19 18:05:26 +01:00
15e5025a73
Merge with /home/hs/SC3/u-boot-dev
2007-01-19 12:06:32 +01:00
9d8d5a5bfb
[PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 16:05:47 +01:00
0057d758e3
[PATCH] Update Prodrive P3Mx support
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 11:54:52 +01:00
34167a36c2
[PATCH] Add missing Taishan config file
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 11:48:10 +01:00
cb4820725e
[PATCH] Fix: Compilerwarnings for SC3 board.
...
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-18 11:28:51 +01:00
6d3e010723
Raname solidcard3 into sc3; add redundant env for sc3
2007-01-16 18:30:50 +01:00
1bbbbdd20f
Update default environment for Solidcard3
2007-01-16 12:46:35 +01:00
f11033e739
Merge with /home/hs/SC3/u-boot
...
Some code cleanup.
2007-01-15 13:41:04 +01:00
ddd4123336
Merge with /home/hs/MAN/u-boot-dev
2007-01-15 12:56:52 +01:00
44cd6de2e1
Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
2007-01-13 08:01:31 +01:00
95981778cf
[PATCH] Update 440SP(e) cpu revisions
...
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 08:01:03 +01:00
77ddc5b9af
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:56 +01:00
36adff362c
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:19 +01:00
ca43ba18e9
Added support for the SOLIDCARD III board from Eurodesign
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
6abaee4262
Adjusted default environment for cam5200 board.
2007-01-10 16:51:05 +01:00
0350e79d2a
Merge with /home/m8/git/u-boot/
2007-01-10 16:36:51 +01:00
d9384de2f5
CAM5200 flash driver modifications:
...
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
2007-01-10 00:26:15 +01:00
67fea022fa
SPC1920: cleanup memory contoller setup
2007-01-09 16:02:48 +01:00
8fc2102faa
Fix the cpu speed setup to work with all boards.
2007-01-09 14:57:14 +01:00
9295acb774
SPC1920: add support for the FM18L08 Ramtron FRAM
2007-01-09 14:57:13 +01:00
38ccd2fdf3
SPC1920: update the HPI register addresses to work with the second
...
generation of hardware
2007-01-09 14:57:13 +01:00
5921e5313f
Miscellanious spc1920 related cleanups
2007-01-09 14:57:13 +01:00
0be62728aa
Add support for the DS3231 RTC
2007-01-09 14:57:12 +01:00
8139567b60
SMC1 uses external CLK4 instead of BRG on spc1920
2007-01-09 14:57:11 +01:00
d8d9de1a02
Update the SPC1920 CMB PLD driver
2007-01-09 14:57:10 +01:00
3f34f86916
Add / enable I2C support on the spc1920 board
2007-01-09 14:57:10 +01:00
d28707dbce
Add support for the tms320671x host port interface (HPI)
2007-01-09 14:57:10 +01:00
f16c1da957
[PATCH] Update ALPR board files
...
This update brings the ALPR board support to the newest version.
It also fixes a problem with the NAND driver.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-06 15:56:13 +01:00
c04a1a7287
Merge with /home/stefan/git/u-boot/denx-merge-sr
2007-01-05 10:40:50 +01:00
a78bc443ae
[PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
...
This fix will make the MAL burst disabling patch for the Linux
EMAC driver obsolete.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-05 10:40:36 +01:00
0238898382
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
...
This code will optimize the DDR2 controller setup on a board specific
basis.
Note: This code doesn't work right now on the NAND booting image for the
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-05 10:38:05 +01:00
574ca77c41
Merge with /home/tur/proj/v38b/u-boot
2007-01-04 02:05:51 +01:00
cce4acbb68
Few V38B changes:
...
- fix a typo in V38B config file
- move watchdog initialisation earlier in the boot process
- add "wdt=off" to default kernel command line (disables kernel watchdog)
2006-12-28 19:08:21 +01:00
Bartlomiej Sieka
Piotr Kruszynski
Wolfgang Denk
Heiko Schocher
Stefan Roese
Reinhard Thies
Detlev Zundel
Marian Balakowicz
Markus Klotzbuecher
Markus Klotzbuecher