Commit graph

106 commits

Author SHA1 Message Date
Wolfgang Wegner
87d93a1ba2 move prototypes for gunzip() and zunzip() to common.h
Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus
repeated in every file using it. This patch moves the prototypes to
common.h and removes all prototypes distributed anywhere else.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2009-12-21 21:39:59 +01:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Wolfgang Denk
206c00f26f Merge branch 'master' into next
Conflicts:
	lib_generic/zlib.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-07 22:47:17 +01:00
Wolfgang Denk
a9f99ab44b zlib.c: avoid build conflicts for cradle board
Commit dce3d79710 updated the zlib code to v0.95; this caused
conflicts when building for the "cradle" board, because the (pretty
generic) preprocessor variable "OFF" was used in multiple files.
Make sure to avoid further conflicts by #undef'ing it in zlib.c
before redefining it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
cc: Angelo Castello <angelo.castello@st.com>
cc: Alessandro Rubini <rubini-list@gnudd.com>
2009-12-07 21:50:18 +01:00
Wolfgang Denk
2a49bf3149 Merge branch 'master' into next
Conflicts:
	board/esd/plu405/plu405.c
	drivers/rtc/ftrtc010.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05 02:11:59 +01:00
Mike Frysinger
f68ab43de6 lzma: ignore unset filesizes
The Linux kernel build system changed how it compresses things with LZMA
such that the header no longer contains the filesize (it is instead set to
all F's).  So if we get a LZMA image that has -1 for the 64bit field,
let's just assume that the decompressed size is unknown and continue on.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-05 01:49:52 +01:00
Joakim Tjernlund
cd514aeb99 zlib: Optimize decompression
This patch optimizes the direct copy procedure.
Uses get_unaligned() but only in one place.
The copy loop just above this one can also use this
optimization, but I havn't done so as I have not tested if it
is a win there too.
On my MPC8321 this is about 17% faster on my JFFS2 root FS
than the original. No speed test has been performed in u-boot.

Size increase on ppc: 484 bytes

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05 01:32:32 +01:00
Peter Korsgaard
20dde48bca add lzop decompression support
Add lzop decompression support to the existing lzo bitstream handling
(think gzip versus zlib), and support it for uImage decompression if
CONFIG_LZO is enabled.

Lzop doesn't compress as good as gzip (~10% worse), but decompression
is very fast (~0.7s faster here on a slow ppc). The lzop decompression
code is based on Albin Tonnerre's recent ARM Linux lzo support patch.

Cc: albin.tonnerre@free-electrons.com
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05 01:30:23 +01:00
Ingo van Lil
3eb90bad65 Generic udelay() with watchdog support
According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.

This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().

Signed-off-by: Ingo van Lil <inguin@gmx.de>
2009-12-05 01:08:53 +01:00
Joakim Tjernlund
3ee8c12071 crc32: Impl. linux optimized crc32()
Ported over the more efficient linux crc32() function.
A quick comparsion on ppc:
After changing the old crc32 to do 4 bytes in the
inner loop to be able to compare with new version one can note:
- old inner loop has 61 insn, new has 19 insn.
- new crc32 does one 32 bit load of data to crc while
  the old does four 8 bits loads.
- size is bit bigger for the new crc32:
  1392(old) 1416(new) of text. The is because the new version
  shares code with crc32_no_comp() instead of duplicating code.
- about 33% faster on ppc:
  New > crc 0 0xfffffff -> 39 secs
  Old > crc 0 0xfffffff -> 60 secs

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-12-02 23:42:40 +01:00
Peter Tyser
9ef78511cd circbuf: Move to lib_generic and conditionally compile
circbuf could be used as a generic library and is only currently
needed when CONFIG_USB_TTY is defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02 23:19:32 +01:00
Alessandro Rubini
e3ea948d45 lib_generic memset: fill one word at a time if possible
If the destination is aligned, fill ulong values until possible.
Then fill remaining part by byte.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 23:10:40 +02:00
Alessandro Rubini
ecd830b863 lib_generic memcpy: copy one word at a time if possible
If source and destination are aligned, this copies ulong values
until possible, trailing part is copied by byte. Thanks for the details
to Wolfgang Denk, Mike Frysinger, Peter Tyser, Chris Moore.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 23:10:37 +02:00
Giuseppe CONDORELLI
7662eb2b9d zlib: fix code when DEBUG is defined
Removed stdio.h inclusion and moved trace macros to use printf avoiding to
write debug informations to standard error.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
2009-09-04 23:04:20 +02:00
Giuseppe CONDORELLI
253cb831f5 zlib: add watchdog reset call
This patch adds watchdog reset call to allow its invokation during decompression
phase. This control was present on old zlib version and here it is
backported for those relevant routines. This patch is sent as a zlib separate
one beacuse it was not tested due to specific board lack.
zlib patches will be unified just in one when this will be validated through
tests.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
2009-08-11 22:15:18 +02:00
Giuseppe CONDORELLI
dce3d79710 zlib: updated to v.1.2.3
This patch updates zlib to the latest stable version.
Only relevant zlib parts were ported to u-boot tree, as already did for the
current zlib (0.95). New zlib guarantees a faster inflate performances
other then others improvements as explained at www.zlib.net.
It also includes Alessandro Rubini's patches to allow 0 as destination pointer
and to call watchdog reset if required by architecture.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: Angelo Castello <angelo.castello@st.com>
Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
2009-08-11 22:14:29 +02:00
Luigi 'Comio' Mantellini
3f1649fb0d Fix LZMA string.h header inclusion issue and remove unused variables.
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
2009-08-09 22:51:53 +02:00
rhabarber1848@web.de
fafbb2c3e4 add WATCHDOG_RESET to allow LZMA kernel decompression on slow machines
Signed-off-by: rhabarber1848@web.de
2009-07-27 00:16:36 +02:00
Dirk Behme
479105065d Use do_div from div64.h for vsprintf
Use do_div from div64.h for vsprintf in case of 64bit division.
For 32bit division, do_div from div64.h can't be used as it
needs a 64bit parameter.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
CC: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-07-27 00:10:12 +02:00
Wolfgang Denk
f33b325af6 Revert "zlib: updated to v.1.2.3"
This reverts commit b201171f2b.

The commit caused problems for example when unpacking kernel images:

	   Uncompressing Kernel Image ... Error: inflate() returned -2
	   GUNZIP: uncompress, out-of-mem or overwrite error - must
	   RESET board to recover

Conflicts:

	include/u-boot/zlib.h
	lib_generic/zlib.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-24 14:24:07 +02:00
Wolfgang Denk
28958b8bea Coding Style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-23 22:23:23 +02:00
Giuseppe CONDORELLI
b201171f2b zlib: updated to v.1.2.3
This patch updates zlib to the latest stable version.

Only relevant zlib parts were ported to u-boot tree, as was done for
the previously used version of zlib (0.95). New zlib gives faster
inflate performance and other improvements, see www.zlib.net

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: Angelo Castello <angelo.castello@st.com>

Edited commit message

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-23 19:12:55 +02:00
Luigi 'Comio' Mantellini
caf72ff329 Refresh LZMA-lib to v4.65
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
2009-07-22 09:43:27 +02:00
Mike Frysinger
3756609076 compiler.h: unify system ifdef cruft here
Shove a lot of the HOSTCC and related #ifdef checking crap into the new
compiler.h header so that we can keep all other headers nice and clean.

Also introduce custom uswap functions so we don't have to rely on the non
standard implementations that a host may (or may not in the case of OS X)
provide.  This allows mkimage to finally build cleanly on an OS X system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19 21:41:46 +02:00
Scott Wood
be33b046b5 Remove legacy NAND and disk on chip code.
Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 19:07:47 -05:00
Ricardo Ribalda Delgado
35f6a943f7 lib_generic: gunzip: New function zunzip
Separate gunzip in

gunzip: Find the end of the header and call zunzip.
zunzip: Inflate gunzip block without header.

UBI fs blocks can be compresed in lzo, zlib or no-compression. The
current implementation of u-boot supported all the compressions but
there was a bug in the implementation of the zlib blocks.

UBIFS's Zlib blocks do not have header but they were compressed using
gunzip, a function used to decompress gunzip files/sectors with a
header.

This patch adds a new function zunzip that uncompress a zlib block with
no header.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2009-04-30 23:07:02 +02:00
Wolfgang Denk
c0a14aedc3 Update CHANGELOG, coding style cleanup. 2009-04-05 00:27:57 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a31e091ad7 rename include/zlib.h to include/u-boot/zlib.h
Some systems have zlib.h installed in /usr/include/. This isn't the
desired file for u-boot code - we want the one in include/zlib.h.
This rename will avoid the conflict.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-04 15:37:54 +02:00
Stefan Roese
b1b4e89a0f Add LZO decompressor support
This patch adds LZO decompression support to U-Boot. It is needed for
the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
decompressor. Since we only support read-only in UBIFS, only the
decompressor is needed.

All this is copied with minor changes from the current Linux kernel
version (2.6.28-rc8).

This patch only implements this LZO decompressor support for PPC.
Other platforms using UBIFS will have to add the required
"include/asm/unaligned.h" as well. It should be fairly easy to copy this
from the Linux source tree as I have done it for PPC in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-20 22:39:15 +01:00
Mike Frysinger
6c6166f529 vsprintf: pull updates from Linux kernel
This brings in support for the %p modifier which allows us to easily print
out things like ip addresses, mac addresses, and pointers.

It also converts the rarely used 'q' length modifier to the common 'L'
modifier when dealing with quad types.

While this new code is a bit larger (~1k .text), most of it should be made
up by converting the existing ip/mac address code to use format modifiers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-20 22:39:09 +01:00
Mike Frysinger
ab76e9848a bzip2: move ifdef handling to Makefile COBJS-$(...)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-11 23:04:13 +01:00
Matthias Fuchs
107b801cf3 Fix gunzip in case of insufficient output buffer
U-Boot's gunzip() function does not handle the return code
of zlib's inflate() function correctly. gunzip() is implemented
to uncompress all input data in one run. So the correct return
code for the good case is Z_STREAM_END. In case of insufficient
output buffer memory inflate returns Z_OK. For gunzip() this
is an error.

It also makes sense to me to call inflateEnd() also in case
of an error.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2009-01-27 20:59:09 +01:00
Kumar Gala
63240ba88c Introduce addr_map library
Add a library that helps in translating between virtual and physical
addresses.  This library can be useful as a simple means to implement
map_physmem() and virt_to_phys() for platforms that need functionality
beyond the simple 1:1 mapping.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15 22:05:36 +01:00
Kyungmin Park
7e6ee7ad27 UBI: Add basic UBI support to U-Boot (Part 6/8)
This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
It's based on the Linux UBI version and basically has a "OS"
translation wrapper that defines most Linux specific calls
(spin_lock() etc.) into no-ops. Some source code parts have been
uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
this version with the Linux version and simplifies future UBI
ports/bug-fixes from the Linux version.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00
Wolfgang Denk
d9d8c7c696 Fix strmhz(): avoid printing negative fractions
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-22 08:52:19 +02:00
Wolfgang Denk
d50c7d4be1 strmhz(): Round numbers when printing clock frequencies
Round clock frequencies for printing.

Many boards printed off clock frequencies like 399 MHz instead of the
exact 400 MHz because numberes were not rounded. This is fixed now.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:35 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kyungmin Park
7ba890bf2f Add Red Black Tree support
Now it's used at UBI module. Of course other modules can use it.
If you want to use it, please define CONFIG_RBTREE

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-10-18 21:54:01 +02:00
Wolfgang Denk
f12e4549b6 Coding style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-13 02:23:05 +02:00
Luigi 'Comio' Mantellini
fc9c1727b5 Add support for LZMA uncompression algorithm.
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-13 01:59:07 +02:00
Jean-Christophe PLAGNIOL-VILLARD
bbf52df9aa crc16: move to lib_generic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-29 12:25:02 +02:00
Jean-Christophe PLAGNIOL-VILLARD
717a222229 gunzip: move to lib_generic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-29 12:25:01 +02:00
Haavard Skinnemoen
0768b7a872 Consolidate strmhz() implementation
ARM, i386, m68k and ppc all have identical implementations of strmhz().
Other architectures don't provide this function at all.

This patch moves strmhz() into lib_generic, reducing code duplication
and providing a more unified API across architectures.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-21 01:52:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
cc4a0ceeac drivers/mtd/nand: Move conditional compilation to Makefile
rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:43 +02:00
Jean-Christophe PLAGNIOL-VILLARD
f354b73e16 vsprintf: add z and t options
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-14 14:36:52 +02:00
Wolfgang Denk
9b55a25369 Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-11 01:16:00 +02:00
Andy Fleming
98874ff329 Fix LMB type issues
The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
of casting problems in the bootm code that called the LMB functions.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-10 00:39:28 +02:00
Becky Bruce
417faf285b Allow print_size to print in GB
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-07-09 22:50:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b571afde02 add SHA256 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
2008-06-30 22:57:16 +02:00
Andy Fleming
7570a9941f Fix an underflow bug in __lmb_alloc_base
__lmb_alloc_base can underflow if it fails to find free space.  This was fixed
in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc.  This patch
merely updates __lmb_alloc_base to resemble the current version in Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-06-28 22:22:05 +02:00