Commit graph

1213 commits

Author SHA1 Message Date
Wenyou Yang
b302669f46 sf: sf_params: Add AT25DF321 flash support
Add AT25DF321 flash support.
Fix AT25DF321A device name.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30 00:15:00 +05:30
Moritz Fischer
6bde34f1ae spi: Add support for N25Q016A
This commit adds support in the spi-nor driver for the
N25Q016A, a 16Mbit SPI NOR flash from Micron.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30 00:15:00 +05:30
Hector Palacios
ebb7febc92 mtd: nand: fix bug writing 1 byte less than page size
nand_do_write_ops() determines if it is writing a partial page with the
formula:
	part_pagewr = (column || writelen < (mtd->writesize - 1))

When 'writelen' is exactly 1 byte less than the NAND page size the formula
equates to zero, so the code doesn't process it as a partial write, although
it should.
As a consequence the function remains in the while(1) loop with 'writelen'
becoming 0xffffffff and iterating until the watchdog timeout triggers.

To reproduce the issue on a NAND with 2K page (0x800):
	=> nand erase.part <partition>
	=> nand write $loadaddr <partition> 7ff

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2016-07-24 20:36:29 -05:00
Boris Brezillon
cd7f5e1cdf mtd: nand: Add a full-id entry for the H27QCG8T2E5R‐BCF NAND
Add a full-id entry for the H27QCG8T2E5R‐BCF NAND.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-07-24 20:36:28 -05:00
Boris Brezillon
4ccae81cda mtd: nand: Add the sunxi NAND controller driver
We already have an SPL driver for the sunxi NAND controller, now add
the normal/standard one.

The source has been copied from Linux 4.6 with a few changes to make
it work in u-boot.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-07-24 20:36:28 -05:00
Brian Norris
42bd19ce6c mtd: nand: add common DT init code
These are already-documented common bindings for NAND chips. Let's
handle them in nand_base.

If NAND controller drivers need to act on this data before bringing up
the NAND chip (e.g., fill out ECC callback functions, change HW modes,
etc.), then they can do so between calling nand_scan_ident() and
nand_scan_tail().

The original commit has been slightly reworked to use the fdtdec_xxx()
helpers (instead of the of_xxxx() ones).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-07-24 20:36:28 -05:00
Ladislav Michl
52486927e7 mtd: OneNAND: initialize mtd->writebufsize to let UBI work
io_init checks this value and fails with "bad write buffer size 0 for
2048 min. I/O unit"

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:12 -04:00
Ladislav Michl
77b93e5e9b mtd: OneNAND: allow board init function fail
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:12 -04:00
Ladislav Michl
d9098ee55f mtd: OneNAND: add timeout to wait ready loops
Add timeout to onenand_wait ready loop as it hangs here indefinitely
when chip not present. Once there, do the same for onenand_bbt_wait
as well (note: recent Linux driver code does the same)

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:11 -04:00
Ladislav Michl
0568dd0663 armv7: make gpmc_cfg const
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
[trini: Adapt am33xx, duovero, omap_zoom1]
Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-22 14:46:00 -04:00
Thomas Gleixner
6f4e7d3c75 spl: Lightweight UBI and UBI fastmap support
Booting a payload out of NAND FLASH from the SPL is a crux today, as
it requires hard partioned FLASH. Not a brilliant idea with the
reliability of todays NAND FLASH chips.

The upstream UBI + UBI fastmap implementation which is about to
brought to u-boot is too heavy weight for SPLs as it provides way more
functionality than needed for a SPL and does not even fit into the
restricted SPL areas which are loaded from the SoC boot ROM.

So this provides a fast and lightweight implementation of UBI scanning
and UBI fastmap attach. The scan and logical to physical block mapping
code is developed from scratch, while the fastmap implementation is
lifted from the linux kernel source and stripped down to fit the SPL
needs.

The text foot print on the board which I used for development is:

6854	0	0	6854	1abd
drivers/mtd/ubispl/built-in.o

Attaching a NAND chip with 4096 physical eraseblocks (4 blocks are
reserved for the SPL) takes:

In full scan mode:      1172ms
In fastmap mode:          95ms

The code requires quite some storage. The largest and unknown part of
it is the number of fastmap blocks to read. Therefor the data
structure is not put into the BSS. The code requires a pointer to free
memory handed in which is initialized by the UBI attach code itself.

See doc/README.ubispl for further information on how to use it.

This shares the ubi-media.h and crc32 implementation of drivers/mtd/ubi
There is no way to share the fastmap code, as UBISPL only utilizes the
slightly modified functions ubi_attach_fastmap() and ubi_scan_fastmap()
from the original kernel ubi fastmap implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-22 09:53:00 -04:00
Ladislav Michl
735717d18a onenand_spl_simple: Add a simple OneNAND read function
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 09:53:00 -04:00
Thomas Gleixner
e1a89e9358 nand_spl_simple: Add a simple NAND read function
To support UBI in SPL we need a simple NAND read function. Add one to
nand_spl_simple and keep it as simple as it goes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Scott Wood <oss@buserror.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-07-22 09:52:59 -04:00
Sumit Garg
8f01397ba7 powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL
As part of Chain of Trust for Secure boot, the SPL U-Boot will validate
the next level U-boot image. Add a new function spl_validate_uboot to
perform the validation.

Enable hardware crypto operations in SPL using SEC block.
In case of Secure Boot, PAMU is not bypassed. For allowing SEC block
access to CPC configured as SRAM, configure PAMU.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:23 -07:00
Daniel Schwierzeck
55edb9d4d5 mtd: cfi_flash: fix polling for bit XSR.7 on Intel chips
flash_full_status_check() checks bit XSR.7 on Intel chips. This
should be done by only checking bit 7 and not by comparing the
whole status byte or word with 0x80.

This fixes the non-working block erase in the pflash emulation
of Qemu when used with the MIPS Malta board. MIPS Malta uses x32
mode to access the pflash device. In x32 mode Qemu mirrors the
lower 16 bits of the status word into the upper 16 bits. Thus
the CFI driver gets a status word of 0x8080 in x32 mode. If
flash_full_status_check() uses flash_isequal(), then it polls for
XSR.7 by comparing 0x8080 with 0x80 which never becomes true.

Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-07-20 11:13:26 +02:00
Robert P. J. Day
62a3b7dd08 Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-07-16 09:43:12 -04:00
Siarhei Siamashka
19e99fb4ff sunxi: Support booting from SPI flash
Allwinner devices support SPI flash as one of the possible
bootable media type. The SPI flash chip needs to be connected
to SPI0 pins (port C) to make this work. More information is
available at:

    https://linux-sunxi.org/Bootable_SPI_flash

This patch adds the initial support for booting from SPI flash.
The existing SPI frameworks are not used in order to reduce the
SPL code size. Right now the SPL size grows by ~370 bytes when
CONFIG_SPL_SPI_SUNXI option is enabled.

While there are no popular Allwinner devices with SPI flash at
the moment, testing can be done using a SPI flash module (it
can be bought for ~2$ on ebay) and jumper wires with the boards,
which expose relevant pins on the expansion header. The SPI flash
chips themselves are very cheap (some prices are even listed as
low as 4 cents) and should not cost much if somebody decides to
design a development board with an SPI flash chip soldered on
the PCB.

Another nice feature of the SPI flash is that it can be safely
accessed in a device-independent way (since we know that the
boot ROM is already probing these pins during the boot time).
And if, for example, Olimex boards opted to use SPI flash instead
of EEPROM, then they would have been able to have U-Boot installed
in the SPI flash now and boot the rest of the system from the SATA
hard drive. Hopefully we may see new interesting Allwinner based
development boards in the future, now that the software support
for the SPI flash is in a better shape :-)

Testing can be done by enabling the CONFIG_SPL_SPI_SUNXI option
in a board defconfig, then building U-Boot and finally flashing
the resulting u-boot-sunxi-with-spl.bin binary over USB OTG with
a help of the sunxi-fel tool:

   sunxi-fel spiflash-write 0 u-boot-sunxi-with-spl.bin

The device needs to be switched into FEL (USB recovery) mode first.
The most suitable boards for testing are Orange Pi PC and Pine64.
Because these boards are cheap, have no built-in NAND/eMMC and
expose SPI0 pins on the Raspberry Pi compatible expansion header.
The A13-OLinuXino-Micro board also can be used.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-15 08:34:34 +02:00
Andre Renaud
62f8183f6a mtd: nand: Drop a blank line in nand_wait()
This empty line should not be there. Remove it.
Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-24 17:23:14 -04:00
Tom Rini
2313d48445 Merge git://git.denx.de/u-boot-nand-flash 2016-06-20 05:15:52 -04:00
Boris Brezillon
30780f9483 mtd: nand: Patch remaining places where nand_to_mtd() should be used
Some drivers are still directly accessing the chip->mtd field. Patch
them to use nand_to_mtd() instead.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-06-19 19:28:38 -05:00
Max Krummenacher
e1c29086d5 nand: nand torture: follow sync with linux v4.6
follow parameter name change (nand to mtd) to fix compiler error.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-06-19 19:19:30 -05:00
Boris Brezillon
7748b41482 spl: nand: sunxi: add support for NAND config auto-detection
NAND chips are supposed to expose their capabilities through advanced
mechanisms like READID, ONFI or JEDEC parameter tables. While those
methods are appropriate for the bootloader itself, it's way to
complicated and takes too much space to fit in the SPL.

Replace those mechanisms by a dumb 'trial and error' mechanism.

With this new approach we can get rid of the fixed config list that was
used in the sunxi NAND SPL driver.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:02 -05:00
Boris Brezillon
4e7d1b3beb spl: nand: sunxi: split 'load page' and 'read page' logic
Split the 'load page' and 'read page' logic in 2 different functions so
we can later load the page and test different ECC configs without the
penalty of reloading the same page in the NAND cache.

We also move common setup to a dedicated function (nand_apply_config()) to
avoid rewriting the same values in NFC registers each time we read a page.

These new functions are passed a pointer to an nfc_config struct to limit
the number of parameters.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:01 -05:00
Boris Brezillon
bb9783b66b spl: nand: sunxi: rework status polling loop
check_value_xxx() helpers are using a 1ms delay between each test, which
can be quite long for some operations (like a page read on an SLC NAND).
Since we don't have anything to do but to poll this register, reduce the
delay between each test to 1us.

While we're at it, rename the max_number_of_retries parameters and the
MAX_RETRIES macro into timeout_us and DEFAULT_TIMEOUT_US to reflect that
we're actually waiting a given amount of time and not only a number of
retries.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:01 -05:00
Boris Brezillon
fa30115878 spl: nand: sunxi: stop guessing the redundant u-boot offset
Use CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND value instead of trying to guess
where the redundant u-boot image is based on simple (and most of the time
erroneous) heuristics.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>

# Conflicts:
#	drivers/mtd/nand/sunxi_nand_spl.c
2016-06-19 19:12:01 -05:00
Boris Brezillon
80ef700f8d spl: nand: support redundant u-boot image
On modern NAND it's more than recommended to have a backup copy of the
u-boot binary to recover from corruption: bitflips are quite common on
MLC NANDs, and the read-disturbance will corrupt your u-boot partitition
more quickly than what you would see on an SLC NAND.

Add an extra Kconfig option to specify the offset of the redundant u-boot
image.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
[scottwood: added ifdef to fix build break]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-19 19:11:57 -05:00
Boris Brezillon
494e108651 spl: nand: rework SYS_NAND_U_BOOT_OFFS Kconfig option dependency
The SYS_NAND_U_BOOT_OFFS is quite generic, but the Kconfig entry is forced
to explicitly depend on platforms that are not already defining it in their
include/configs/<board>.h header.

Add the SYS_NAND_U_BOOT_LOCATIONS option, make the SYS_NAND_U_BOOT_OFFS
depends on it, remove the dependency on NAND_SUNXI and make it dependent
on SPL selection.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:11:48 -05:00
Boris Brezillon
c4adf9db5d spl: nand: sunxi: remove support for so-called 'syndrome' mode
The sunxi SPL NAND controller driver supports use 'BootROM'-like configs,
that is, configs where the ECC bytes and real data are interleaved in the
page instead of putting ECC bytes in the OOB area.

Doing that has several drawbacks:
- since you're interleaving data and ECC bytes you can't use the whole page
  otherwise you might override the bad block marker with non-FF bytes.
- to solve the bad block marker problem, the ROM code supports partially
  using the page, but this introduces a huge penalty both in term of read
  speed and NAND memory usage. While this is fine for rather small
  binaries(like the SPL one which is at maximum 24KB large), it becomes
  non-negligible for the bootloader image (several hundred of KB).
- auto-detection of the page size is not reliable (this is in my opinion
  the biggest problem). If you get the page size wrong, you'll end up
  reading data at a different offset than what was specified by the caller
  and the reading may succeed (if valid data were written at this address).

For all those reasons I think it's wiser to completely remove support for
'syndrome' configs. If we ever need to support it again, then I'd recommend
specifying all the config parameters through Kconfig options.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 18:52:35 -05:00
Tom Rini
fd9102dafe Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-06-13 08:50:58 -04:00
Andre Renaud
65319f15ca at91: nand: Set up the ECC strength correctly
This needs to be set to avoid a fatal error when ECC is used.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Andre Renaud
5a9ae33316 at91: Correct NAND ECC register access
This uses the wrote base register value. Fix it.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Heiko Schocher
3a504d9639 mtd: nand: omap: allow to switch to BCH16
support in omap_nand_switch_ecc() also an eccstrength
from 16.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:12 -04:00
Heiko Schocher
5d29e27eb9 nand: add nand mtd concat support
add for nand devices mtd concat support. Generic MTD concat
support is already ported to mainline, and used in the cfi_mtd
driver. This patch adds it similiar for nand devices.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:12 -04:00
Tom Rini
715b3a9b24 Merge git://git.denx.de/u-boot-nand-flash 2016-06-04 08:49:47 -04:00
Max Krummenacher
667067faa1 nand: fix nand torture to use changed mtd api
The mtd subsystem deprecated and renamed the direct use of the mtd_info
struct's functionpointers. Instead the corresponding mtd_xxx function
should be used.

See also:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3c3c10bba1e4ccb75b41442e45c1a072f6cded19

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-06-03 20:29:05 -05:00
Scott Wood
ceee07b658 mtd: nand: Sync with Linux v4.6
Updates the NAND code to match Linux v4.6.  The previous sync was from
Linux v4.1 in commit d3963721d9.

Note that none of the individual NAND drivers tracked Linux closely
enough to be synced themselves, other than manually applying a few
cross-tree changes.

Signed-off-by: Scott Wood <oss@buserror.net>
Tested-by: Heiko Schocher <hs@denx.de>
2016-06-03 20:27:48 -05:00
Scott Wood
81c772521f mtd: nand: Add page argument to write_page() etc.
This change is part of the Linux 4.6 sync.  It is being done before the
main sync patch in order to make it easier to address the issue across
all NAND drivers (many/most of which do not closely track their Linux
counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
b616d9b0a7 nand: Embed mtd_info in struct nand_chip
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
151c06ec61 mtd: nand: Remove nand_info_t typedef
This typedef serves no purpose other than causing confusion with
struct nand_chip.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
ea7d1eec66 mtd: nand: Remove docg4 driver and palmtreo680 flashing tool
Commit ad4f54ea86 ("arm: Remove palmtreo680 board") removed the only
user of the docg4 driver and the palmtreo680 image flashing tool.  This
patch removes them.

Signed-off-by: Scott Wood <oss@buserror.net>
Cc: Mike Dunn <mikedunn@newsguy.com>
Cc: Simon Glass <sjg@chromium.org>
2016-06-03 20:27:48 -05:00
Marek Vasut
5d74e3a6f1 mtd: nand: Remove jz4740 driver
This driver is not used by anyone, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Scott Wood <oss@buserror.net>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Siva Durga Prasad Paladugu
a39d14406a mtd: nand: arasan_nfc: Correct nand ecc initialization
Correct the nand ecc initialization code
This fixes the issue of incorrect nand ecc
init if no device is found in ecc_matrix then
it endsup ecc init with junk initialization
instead of the most suited one.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2016-06-03 20:27:48 -05:00
Prabhakar Kushwaha
d074c06ba7 driver: mtd: spi: Adding support for QSPI flash
Serial number, vendor id and page size are added for QSPI flash
common on both LS1012AQDS and LS1012ARDB i.e. S25FS512SDSMFI011.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:49 -07:00
Lokesh Vutla
0985294604 mtd: nand: am335x: spl: Fix copying of image
When offset is not aligned to page address, it is possible that extra offset
will be read from nand. Adjust the image such that first byte of the image
is at load address after the first page is read.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:41:41 -04:00
Lokesh Vutla
00d559561e spl: Support loading a FIT from SPI
Detect a FIT when loading from SPI and handle it using the
new FIT SPL support.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:41:40 -04:00
Tom Rini
fc15b9beed Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-05-24 13:42:03 -04:00
Peng Fan
9aa550d2e8 mtd: nand: mxs: use simpler runtime cpu dection macros
Use simpler runtime cpu dection macros.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Scott Wood <oss@buserror.net>
2016-05-24 14:59:57 +02:00
Purna Chandra Mandal
5c99045699 drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.
PIC32 internal flash devices are parallel NOR flash divided into
number of banks to allow erase-programming in one while fetch and
execution continues on other. As the flash banks are memory mapped
stored code can be executed directly from flash (XIP), also there
is additional hardware logic to prefetch and cache contents to
improve execution performance. These flash can also be used to
store user data (like environment).
Flash erase and programming are handled by on-chip NVM controller.

Driver implemented driver model but MTD is not really support.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-21 01:25:50 +02:00