Commit Graph

2301 Commits

Author SHA1 Message Date
Stefan Roese 58e3b14c18 [PATCH] nand: Fix patch merge problem
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28 11:04:45 +01:00
Wolfgang Denk d2c83f5493 Merge with /home/sr/git/u-boot/denx-alpr-merge-test 2006-11-27 23:11:18 +01:00
Wolfgang Denk 4f4b602ec7 Update CHANGELOG 2006-11-27 22:53:53 +01:00
Wolfgang Denk 70864e6163 Merge with /home/sr/git/u-boot/4xx-enet 2006-11-27 22:50:25 +01:00
Wolfgang Denk 7de8354855 Merge with /home/sr/git/u-boot/nand-env 2006-11-27 22:49:46 +01:00
Wolfgang Denk a5bfa2726b Merge with /home/sr/git/u-boot/nand-timeout 2006-11-27 22:49:11 +01:00
Wolfgang Denk f7214cf9ea Merge with /home/sr/git/u-boot/denx-of 2006-11-27 22:46:10 +01:00
Stefan Roese f6e495f54c [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
Patch below corrects the setting of the zmiifer register, it was
overwritting the register rather than ORing the settings.

Signed-off-by: Neil Wilson <NWilson@airspan.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:43:25 +01:00
Stefan Roese d1a7254529 [PATCH] Select NAND embedded environment from board configuration
The current NAND Bootloader setup forces the environment
variables to be in line with the bootloader. This change
enables the configuration to be made in the board include
file instead so that it can be individually enabled.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:34:10 +01:00
Stefan Roese 1578486285 [PATCH] nand_wait() timeout fixes
Two fixes for the nand_wait() function in
drivers/nand/nand_base.c:

1. Use correct timeouts. The original timeouts in Linux
source are 400ms and 20ms not 40s and 20s

2. Return correct error value in case of timeout. 0 is
interpreted as OK.

Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:24:40 +01:00
Stefan Roese da5553b095 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
arguments to bootm.  It removes the getenv("disable_of") test that used
to be used for this purpose.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-27 17:04:06 +01:00
Wolfgang Denk 83dc830b16 Merge with /home/mk/git/u-boot-generic_ohci#generic_ohci 2006-11-27 16:52:20 +01:00
Wolfgang Denk d3c5e8b2f5 Merge with /home/wd/git/u-boot/master 2006-11-27 16:13:00 +01:00
Wolfgang Denk a9398e0185 Minor code cleanup. Update CHANGELOG. 2006-11-27 15:32:42 +01:00
Stefan Roese 1729b92cde [PATCH] 4xx: Fix problem with board specific reset code (now for real)
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:52:04 +01:00
Stefan Roese cc5ee8a92a [PATCH] alpr: remove unused board specific flash driver
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:49:51 +01:00
Stefan Roese 1f94d162e2 [PATCH] 4xx: Fix problem with board specific reset code
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:48:41 +01:00
Stefan Roese ec0c2ec725 [PATCH] Remove testing 4xx enet PHY setup
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:46:06 +01:00
Stefan Roese 1c2ce22620 [PATCH] Update Prodrive ALPR board support (440GX)
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:12:17 +01:00
Stefan Roese 48c7d6dba9 Merge with /home/stefan/git/u-boot/denx 2006-11-27 14:11:22 +01:00
Wolfgang Denk 3b58d94590 Merge with /home/sr/git/u-boot/denx 2006-11-27 13:55:31 +01:00
Markus Klotzbuecher 58b4857766 Add a small README with information on the generic ohci driver. 2006-11-27 11:51:21 +01:00
Markus Klotzbuecher ae3b770e4e Fix some endianness issues related to the generic ohci driver 2006-11-27 11:46:46 +01:00
Markus Klotzbuecher 7b59b3c7a8 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
to choose between the old and the generic OHCI drivers.
2006-11-27 11:44:58 +01:00
Markus Klotzbuecher 53e336e9ff Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
and adapted board configs TQM5200 and yosemite accordingly. This commit
also makes the maximum number of root hub ports configurable 
(CFG_USB_OHCI_MAX_ROOT_PORTS).
2006-11-27 11:43:09 +01:00
Wolfgang Denk 78d620ebb5 Updates for TQM5200 modules:
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions
2006-11-23 22:58:58 +01:00
Stefan Roese 2053283304 [PATCH] PPC4xx start.S: Fix for processor errata
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.

Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-22 13:20:50 +01:00
Stefan Roese 4ef6251403 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-20 20:39:52 +01:00
Wolfgang Denk e4bbd8da16 Update CHANGELOG 2006-11-20 10:28:30 +01:00
Wolfgang Denk fb934873d6 Merge with /home/sr/git/u-boot/cfi-update 2006-11-20 10:27:39 +01:00
Stefan Roese 260421a21e [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
* Adds support for AMD command set Top Boot flash geometry reversal
   * Adds support for reading JEDEC Manufacturer ID and Device ID
   * Adds support for displaying command set, manufacturer id and
     device ids (flinfo)
   * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
   * Removes outdated change history (refer to git log instead)

Signed-off-by: Tolunay Orkun <listmember@orkun.us>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-13 13:58:55 +01:00
Wolfgang Denk b21b511d4c Update CHANGELOG 2006-11-12 21:13:23 +01:00
Wolfgang Denk cb2eb17b2f Merge with /home/tur/proj/v38b/u-boot 2006-11-12 21:12:52 +01:00
Bartlomiej Sieka ce3f1a40c5 Disable the watchdog in the default config for the V38B board. 2006-11-11 22:48:22 +01:00
Bartlomiej Sieka 44a47e6db2 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
group is enabled for USB earlier (in cpu_init_f() instead of
usb_lowlevel_init()).
2006-11-11 22:43:00 +01:00
Stefan Roese dfc8a9ee00 Merge with /home/stefan/git/u-boot/denx 2006-11-10 07:48:47 +01:00
Wolfgang Denk 91650b3e4d Sequential accesses to non-existent memory must be synchronized,
at least on G2 cores.

This fixes get_ram_size() problems on MPC5200 Rev. B boards.
2006-11-06 17:06:36 +01:00
Timur Tabi be5e61815d mpc83xx: Update 83xx to use fsl_i2c.c
Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:23 -06:00
Timur Tabi d239d74b1c mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
tree matches the other 8xxx trees.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:23 -06:00
Kim Phillips f7fb2e703e mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c 2006-11-03 19:42:22 -06:00
Dave Liu 90f30a710a mpc83xx: Fix the incorrect dcbz operation
The 834x rev1.x silicon has one CPU5 errata.

The issue is when the data cache locked with
HID0[DLOCK], the dcbz instruction looks like no-op inst.

The right behavior of the data cache is when the data cache
Locked with HID0[DLOCK], the dcbz instruction allocates
new tags in cache.

The 834x rev3.0 and later and 8360 have not this bug inside.

So, when 834x rev3.0/8360 are working with ECC, the dcbz
instruction will corrupt the stack in cache, the processor will
checkstop reset.

However, the 834x rev1.x can work with ECC with these code,
because the sillicon has this cache bug. The dcbz will not
corrupt the stack in cache.
Really, it is the fault code running on fault sillicon.

This patch fix the incorrect dcbz operation. Instead of
CPU FP writing to initialise the ECC.

CHANGELOG:
* Fix the incorrect dcbz operation instead of CPU FP
writing to initialise the ECC memory. Otherwise, it
will corrupt the stack in cache, The processor will checkstop
reset.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2006-11-03 19:42:22 -06:00
Kim Phillips bf0b542d67 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
STDOUT_PATH configuration bits to mpc8349emds,
mpc8349itx, and mpc8360emds board code.

redo environment to use bootm with the fdtaddr
for booting ARCH=powerpc kernels by default,
and provide default fdtaddr values.
2006-11-03 19:42:22 -06:00
Kim Phillips 48041365b3 mpc83xx: change ft code to modify local-mac-address property
Update 83xx OF code to update local-mac-address properties
for ethernet instead of the obsolete 'address' property.
2006-11-03 19:42:22 -06:00
Timur Tabi 9ca880a250 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
This patch also adds an improved I2C set_speed(), which handles all clock
frequencies.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:22 -06:00
Dave Liu ac4b5622ce mpc83xx: add the README.mpc8360emds
add doc/README.mpc8360emds to accompany the new board support
2006-11-03 19:42:21 -06:00
Dave Liu 7737d5c658 mpc83xx: add QE ethernet support
this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
2006-11-03 19:42:21 -06:00
Dave Liu 5f8204394e mpc83xx: Add MPC8360EMDS basic board support
Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
2006-11-03 19:42:21 -06:00
Dave Liu 23892e4935 mpc83xx: add the QUICC Engine (QE) immap file
common QE immap file.  Also required for 8360.
2006-11-03 19:42:20 -06:00
Dave Liu b701652a49 mpc83xx: Add 8360 specifics to 83xx immap
Mainly add QE device dependencies, with appropriate 8360 protection.
Lindent also run.
2006-11-03 19:42:20 -06:00
Timur Tabi 988833324a mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
  2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"

CHANGELOG:

* For the 8349E-mITX, fix some size values in pci_init_board(), enable
  the clock for the 2nd USB board (Linux kernel will hang otherwise),
  and fix the CONFIG_BOOTARGS macro.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:20 -06:00