Commit graph

20 commits

Author SHA1 Message Date
Masahiro Yamada
d085ecd61b ARM: uniphier: switch to raw U-Boot image
Now everything is done to load a raw U-Boot proper image instead of
an mkimage-processed one (as far as I tested on NAND, eMMC, NOR).

The SPL already knows the load address of the U-Boot proper without
parsing its uImage header because the load address is defined by
CONFIG_SYS_TEXT_BASE, assuming that the two images are generated from
the same build.

My main motivation of this switch is to use u-boot-with-spl.bin, a
concatenation of u-boot-spl.bin and u-boot.bin.  (I wish there were
a concatenation of u-boot-spl.bin and u-boot.img...)  Anyway, this
commit would be useful for one-shot image burn.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:41 +09:00
Masahiro Yamada
95a2d438c9 ARM: uniphier: fix README instruction for updating U-Boot via TFTP
Commit 3cb9abc9c5 ("ARM: uniphier: update U-Boot file names in
workflow") missed to update these two sentences.  Fix them now.

Replace u-boot-spl-dtb.bin and u-boot-dtb.img with u-boot-spl.bin
and u-boot.img, respectively.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:41 +09:00
Masahiro Yamada
c6c7eed741 ARM: uniphier: document how-to-build for Ace and Sanji boards
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-09 01:10:30 +09:00
Masahiro Yamada
fe7c95ee5c ARM: uniphier: merge two defconfig files
PH1-Pro5 support and ProXstream2/PH1-LD6b support can coexist in one
image and there is bit more room in SPL to accommodate all of them.
Merge uniphier_pro5_defconfig into uniphier_pxs2_defconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
c231c4367a ARM: uniphier: add emmcupdate command
The Boot ROM expects the boot image (SPL) in the Boot Partition 1.
So, updating images involves the hardware partition switch.  It might
be a bit advanced for some users.

To be user-friendly, this commit adds a useful command to update the
images; just put SPL and U-Boot proper into the public directory of
the TFTP server and execute "run emmcupdate" from the command line.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
a111bfbfad mmc: uniphier: add driver for UniPhier SD/MMC host controller
Add a driver for the on-chip SD/eMMC host controller used by
UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
b9a66b63b4 gpio: uniphier: add driver for UniPhier GPIO controller
This GPIO controller device is used on UniPhier SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
3cb9abc9c5 ARM: uniphier: update U-Boot file names in workflow
Since commit ad1ecd2063 ("fdt: Build a U-Boot binary without device
tree") and commit 03c25bcd26 ("fdt: Build an SPL binary without
device tree"), we can use shorter file names for the output images.

The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE
and CONFIG_SPL_OF_CONTROL.  In this case, spl/u-boot-spl.bin is the
same as spl/u-boot-spl-dtb.bin.  Likewise, u-boot.img is the same as
as u-boot-dtb.img.  So, this change of the flow has no impact.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-14 16:36:13 +09:00
Masahiro Yamada
e69514cc70 ARM: uniphier: fix recommended board setting in document
The mem_is_flash() in arch/arm/mach-uniphier/micro-support_card.c
writes/reads the tail of each NOR flash bank to check if the device
really resides there.

If CS1_SPLIT were enabled, the support card would always require two
NOR flash devices to be inserted for the correct NOR detection.
This is not probably what we want.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-13 01:55:02 +09:00
Masahiro Yamada
e90b368628 ARM: uniphier: rename rest of defconfig files
Rename rest of defconfig files of UniPhier SoC family to have the
prefix uniphier_.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:58 +09:00
Masahiro Yamada
1a2645341a ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig
These boards are similar enough to be supported in a single defconfig
file.  Distinguish one from another by "DEVICE_TREE" from the command
line.  The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:57 +09:00
Masahiro Yamada
5fd3f4346e ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig
These two are similar enough to be merged into a single
defconfig file.  Distinguish one from another by "DEVICE_TREE"
from the command line.  The how-to-build in doc/README.uniphier
should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:57 +09:00
Masahiro Yamada
c57a9a6350 ARM: uniphier: fix address mapping in README.uniphier
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-15 08:42:30 -04:00
Masahiro Yamada
019df879a9 ARM: uniphier: add ProXstream2 and PH1-LD6b support
The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:59:33 +09:00
Masahiro Yamada
28f40d4a4d ARM: uniphier: add PH1-Pro5 support
The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:59:28 +09:00
Masahiro Yamada
f4e190e317 ARM: uniphier: enable SPL_OF_CONTROL
Device Tree really improves code maintainability and is now
available for SPL too.

This is the state-of-the-art implementation in U-boot.

The board files (platform data) are no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-31 00:25:06 +09:00
Masahiro Yamada
62102bee1f ARM: UniPhier: document reference support card
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:42:37 +09:00
Masahiro Yamada
3365b4eb55 ARM: UniPhier: add PH1-sLD3 SoC support
The init code for UMC (Unified Memory Controller) and PLL has not
been mainlined yet, but U-boot proper should work.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:42:22 +09:00
Masahiro Yamada
1e7df7c4e4 usb: UniPhier: add UniPhier on-chip xHCI host driver support
Support xHCI host driver used on Panasonic UniPhier platform.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-03-01 00:03:00 +09:00
Masahiro Yamada
7168da1638 ARM: UniPhier: add a simple README file for UniPhier platform
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:14:57 +09:00