Commit graph

51 commits

Author SHA1 Message Date
Masahiro Yamada
768cade1aa ARM: uniphier: drop unnecessary "bootm_low" environment define
This environment define has been here to work around the LMB
allocation error introduced by commit 9c11135ce0 ("image: fix
getenv_bootm_size() function").

It is no longer needed because the root cause was fixed by commit
0cb389dd1a ("image: fix getenv_bootm_size() function again").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 17:07:46 +09:00
Masahiro Yamada
755c7d9a61 ARM: uniphier: change stack pointer address for SPL
No special reason for the current stack address 0x0ff08000.
Change it to 0x00100000 to simplify the init_page_table.

There are two types of SoCs in terms of the load address of SPL.

 [1] PH1-sLD3, PH1-LD4, PH1-sLD8
   SPL is loaded at 0x00040000-0x0004ffff
 [2] PH1-Pro4, PH1-Pro5, ProXstream2, PH1-LD6b
   SPL is loaded at 0x00100000-0x0010ffff

The new stack area (0x000f8000-0x00100000) should be safe for all the
cases.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:13 +09:00
Masahiro Yamada
3cb9abc9c5 ARM: uniphier: update U-Boot file names in workflow
Since commit ad1ecd2063 ("fdt: Build a U-Boot binary without device
tree") and commit 03c25bcd26 ("fdt: Build an SPL binary without
device tree"), we can use shorter file names for the output images.

The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE
and CONFIG_SPL_OF_CONTROL.  In this case, spl/u-boot-spl.bin is the
same as spl/u-boot-spl-dtb.bin.  Likewise, u-boot.img is the same as
as u-boot-dtb.img.  So, this change of the flow has no impact.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-14 16:36:13 +09:00
Masahiro Yamada
d566f75425 ARM: uniphier: fix nfsboot command
This is no longer working, so needs reworking.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:12 +09:00
Masahiro Yamada
cd5d95653c ARM: uniphier: factor out common part of boot commands
The environment "bootm_low" is updated before the "bootz" command.
This is common for all the boot modes (NOR, NAND, TFTP, etc.), so
can be factored out.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:12 +09:00
Masahiro Yamada
a304143925 ARM: uniphier: add default bootm_low to fix FIT boot
Commit 25d4eb8091 ("ARM: uniphier: add bootm_low environment")
missed to add "bootm_low" for FIT boot.  Set "bootm_low" to the
DRAM base address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:12 +09:00
Masahiro Yamada
90a6e92988 ARM: uniphier: fix NOR boot command
Commit 89835b3557 ("ARM: uniphier: allow to run zImage rather than
uImage") changed the kernel boot commands.  Unlike "bootm", "bootz"
does not relocate the kernel image.  When the boot device is a NOR
flash, the zImage should be copied from the NOR onto the DRAM before
it is passed to the "bootz" command.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:12 +09:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Masahiro Yamada
25d4eb8091 ARM: uniphier: add bootm_low environment
The load address of the kernel can be changed via "kernel_addr_r"
environment.  The device tree and the initramdisk should be relocated
according to the kernel location.

The "bootm_low" should be calculated by masking the lower bits
(TEXT_OFFSET part) of the "kernel_addr_r" environment value.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20 08:39:32 +09:00
Masahiro Yamada
17bd4a2114 ARM: uniphier: define CONFIG_SYS_BOOTMAPSZ
U-Boot relocates the device tree and the initramdisk to the tail
of the memory region before booting the kernel.

Some UniPhier boards are equipped with a large amount of memory.
For those boards, the device tree and the initramdisk are placed out
of the the kernel causing a kernel panic.

Add CONFIG_SYS_BOOTMAPSZ to prevent them from going too high.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20 08:39:22 +09:00
Masahiro Yamada
89835b3557 ARM: uniphier: allow to run zImage rather than uImage
UniPhier SoC family adopt ARM Multi-platform in Linux since the first
upstreaming.  Because CONFIG_ARM_PATCH_PHYS_VIRT is defined, the
kernel image is completely position-independent.  There is no reason
to decide the load address on compile time, but it is up to the boot
loader.  Now, zImage is handier than uImage, also it allows to skip
the relocation of the kernel image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:59 +09:00
Masahiro Yamada
752b75d64b ARM: uniphier: drop fdt_file from CONFIG_EXTRA_ENV_SETTINGS
Now this environment is run-time set to the DTB name U-Boot is really
running with.  Drop the static define.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:56 +09:00
Thomas Chou
9e39003e7f ns16550: move CONFIG_SYS_NS16550 to Kconfig
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-21 21:50:18 -05:00
Masahiro Yamada
09f3ca3dd5 arm, powerpc: select SYS_GENERIC_BOARD
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-24 13:50:38 -04:00
Masahiro Yamada
323d1f9d5b ARM: uniphier: allow to enable multiple SoCs
Before this commit, the Kconfig menu in mach-uniphier only allowed us
to choose one SoC to be compiled.  Each SoC has its own defconfig file
for the build-test coverage.  Consequently, some defconfig files are
duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and
CONFIG_{SOC_NAME}=y.

Now, most of board-specific parameters have been moved to device trees,
so it makes sense to include init code of multiple SoCs into a single
image as long as the SoCs have similar architecture.  In fact, some
SoCs of UniPhier family are very similar:
 - PH1-LD4 and PH1-sLD8
 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit)

This commit will be helpful to merge some defconfig files for better
maintainability.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:58:38 +09:00
Masahiro Yamada
5451b777de ARM: uniphier: remove kernel parameter settings from environment
Currently, console=ttyS0 is hard-coded in CONFIG_EXTRA_ENV_SETTINGS
and it replaces the bootargs in the chosen node of the device tree
passed to the kernel.  This is not preferable because I am going to
add some boards whose console is not ttyS0.

Drop bootargs settings from U-Boot's environment and use the one in
device tree by default.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:27:54 +09:00
Masahiro Yamada
8497ccc4c2 ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*
I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify
they belong to UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:27:53 +09:00
Masahiro Yamada
d7728aa408 ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file
It is no longer necessary to define CONFIG_SUPPORT_CARD_* globally.
Move them to a C file as local macros.  Also, rename the C file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:27:53 +09:00
Masahiro Yamada
cf88affab6 ARM: uniphier: parse device tree to determine DRAM base and size
Device tree specifies the available memory ranges in its "/memory"
node.  Use it to simplify the CONFIG defines.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-25 00:27:53 +09:00
Masahiro Yamada
d5ed8c5727 ARM: uniphier: change the external bus address mapping
In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces
 0x00000000 - 0x0fffffff
 0x40000000 - 0x4fffffff
are both mapped to the external bus (also called system bus),
so either was OK.

In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is
assigned for the serial NOR interface.

Going forward, use the latter for the external bus.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-09-25 00:27:53 +09:00
Masahiro Yamada
9879842c6f ARM: uniphier: drop DCC micro support card support
Historically (for compatibility with very old platforms), two
different types of micro support cards have been used with the
UniPhier SoC development boards.  It has been painful to maintain
both.  Having one of them is enough.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-09-25 00:27:52 +09:00
Masahiro Yamada
f4e190e317 ARM: uniphier: enable SPL_OF_CONTROL
Device Tree really improves code maintainability and is now
available for SPL too.

This is the state-of-the-art implementation in U-boot.

The board files (platform data) are no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-31 00:25:06 +09:00
Masahiro Yamada
de09faab4e ARM: uniphier: remove unused macro
This macro is not referenced at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-08-30 22:19:28 +09:00
Masahiro Yamada
3365b4eb55 ARM: UniPhier: add PH1-sLD3 SoC support
The init code for UMC (Unified Memory Controller) and PLL has not
been mainlined yet, but U-boot proper should work.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:42:22 +09:00
Masahiro Yamada
ad6670ee12 ARM: UniPhier: update CONFIG_BOOTARGS
Both "earlyprintk" and "loglevel=8" should be useful for the
development.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:42:13 +09:00
Masahiro Yamada
e037db0c34 ARM: UniPhier: add environment variable for TFTP boot
The command "run tftpboot" downloads some files onto the RAM
via TFTP and boots the kernel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:42:01 +09:00
Masahiro Yamada
421376ae42 ARM: UniPhier: add environment sets for non-FIT Linux boot
Currently, the environment variables "norboot" and "nandboot" only
work with CONFIG_FIT, but we do not want to depend on CONFIG_FIT to
boot the kernel.

This commit adds environments useful for booting Linux with separate
uImage + ramdisk + DTB.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-23 23:41:53 +09:00
Stefan Roese
d126e01649 autoboot.c: Move config options to Kconfig
This patch moves the following config options to Kconfig:

CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLC

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
 set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
 all boards that did change. Make digsy_mtc_* string include seconds to
 match others and not warn. ]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-08 17:32:16 -04:00
Tom Rini
563e53efaa Merge branch 'master' of git://git.denx.de/u-boot-net
Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-02 08:53:41 -04:00
Masahiro Yamada
ece26f623c ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR
Since commit 92ac520821 (net: Remove all references to
CONFIG_ETHADDR and friends), the ethernet device on UniPhier boards
is not working because of the incorrect (all-zero) MAC address.

Enable CONFIG_NET_RANDOM_ETHADDR to generate the random one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:55:55 +09:00
Masahiro Yamada
f8f35944d8 ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:55:50 +09:00
Joe Hershberger
92ac520821 net: Remove all references to CONFIG_ETHADDR and friends
We really don't want boards defining fixed MAC addresses in their config
so we just remove the option to set it in a fixed way. If you must have
a MAC address that was not provisioned, then use the random MAC address
functionality.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-19 13:33:21 -05:00
Masahiro Yamada
def3feb8cb ARM: UniPhier: add empty lowlevel_init to U-boot proper
To remove the ifdef conditional of CONFIG_SKIP_LOWLEVEL_INIT,
add late_lowlevel_init.S to U-Boot proper.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:48 +09:00
Masahiro Yamada
8cddc27965 ARM: UniPhier: move init stack area just below TEXT_BASE
There is no good reason to have the 0x1000 gap between
CONFIG_SYS_INIT_SP_ADDR and CONFIG_SYS_TEXT_BASE.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:44 +09:00
Masahiro Yamada
6a3cffe8e1 ARM: UniPhier: add CONFIG_SPL_MAX_FOOTPRINT
The Boot ROM of UniPhier platform only loads 64KB image.  We should
always make sure that SPL memory footprint is less than that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:40 +09:00
Masahiro Yamada
ce3a63905b ARM: UniPhier: use CONFIG_SPL_STACK to define SPL stack pointer
Ifdef conditionals for CONFIG options are not Kconfig-friendly.
Instead, define CONFIG_SPL_STACK to prepare for Kconfig moves.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:38 +09:00
Masahiro Yamada
499785b970 ARM: UniPhier: enable Driver Model and UART on SPL
Enable CONFIG_SPL_DM and CONFIG_SPL_SERIAL_SUPPORT, which provide
Driver Model UART support on SPL.

CONFIG_SYS_SPL_MALLOC_{START,SIZE} should be dropped because simple
malloc is preferred on SPL.  Dlmalloc requires some static variables
on .data section that is not available yet for NOR boot mode etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:35 +09:00
Masahiro Yamada
a286039b13 ARM: UniPhier: enable CONFIG_PANIC_HANG
Do not reset board on panic, which allows us to not link reset_cpu()
into SPL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:32 +09:00
Masahiro Yamada
53c45d4e1e ARM: UniPhier: switch to xHCI for PH1-Pro4
PH1-Pro4 includes both EHCI and xHCI IP cores.
Unfortunately, U-Boot cannot enable EHCI and xHCI support
simultaneously.  Some users may wish Super-Speed connection.
Disable CONFIG_USB_EHCI_HCD and enable CONFIG_USB_XHCI_HCD.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:03 +09:00
Simon Glass
b724bd7d63 dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:28 -07:00
Simon Glass
f058f154a9 dm: Add CMD_DM and CMD_DEMO to Kconfig
Add Kconfig settings for these two options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Masahiro Yamada
08fda258ee ARM: UniPhier: revive support card info
Since commit 0365ffcc0b (generic-board: show model name in
board_init_f() too), the support card information has not been
displayed because check_support_card() is invoked only when
show_board_info() fails to get the model name from Device Tree.

This commit adds misc_init_f() function to call check_support_card()
from there.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:03 +09:00
Masahiro Yamada
35adfc4d25 ARM: UniPhier: move SPL init functions to spl_board_init()
Now init functions called from board_postclk_init() and dram_init()
are only necessary for SPL.
Move them to spl_board_init() for clean-up.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:03 +09:00
Masahiro Yamada
84ccd791af ARM: UniPhier: move pin_init() to board_early_init_f()
Currently, I/O pin settings are not necessary for SPL.
The board_early_init_f() seems a suitable place to call pin_init().

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:02 +09:00
Masahiro Yamada
75bc8e85b5 ARM: UniPhier: add environment variable to update images in NAND
To boot UniPhier boards with the NAND boot mode, two images
(u-boot-spl.bin and u-boot-dtb.img) must be written at the correct
offset addresses.

TFTP downloading is useful to update such images in the NAND device.
We generally do:

  => nand erase 0 0x100000
  => tftpboot u-boot-spl.bin
  => nand write $loadaddr 0 0x10000
  => tftpboot u-boot-dtb.img
  => nand write $loadaddr 0x10000 0xf0000

It is a tedious and error-prone operation.

This commit provides the shorthand:

  => run nandupdate

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:11:12 +09:00
Masahiro Yamada
0e063dff5c ARM: UniPhier: use "&&" instead of "; " in commands
Run the next command only when the previous one succeeded.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:11:03 +09:00
Masahiro Yamada
233e42a985 ARM: UniPhier: enable CONFIG_I2C_EEPROM
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Masahiro Yamada
d8bec60c1b ARM: UniPhier: enable CONFIG_CMD_DM
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-18 23:34:30 +09:00
Masahiro Yamada
7e421d640b ARM: UniPhier: use DRAM area for init stack of normal image
The normal image is working on DRAM.  It is better to use DRAM also
for init stack than L2 cache.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-18 23:34:25 +09:00
Masahiro Yamada
7a3620b246 ARM: UniPhier: detect the number of flash banks at run-time
Some UniPhier boards are equipped with an expansion slot that
some optional SRAM/NOR-flash cards can be attached to.  So, run-time
detection of the number of flash banks would be more user-friendly.

Until this commit, UniPhier boards have achieved this by (ab)using
board_flash_wp_on() because the boot failed if flash_size got zero.
Fortunately, this problem was solved by commit 70879a9256 (flash:
do not fail even if flash_size is zero).

Now it is possible to throw away such a tricky workaround.  This
commit also enables CONFIG_SYS_MAX_FLASH_BANKS_DETECT for further
refactoring.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-09 00:08:33 +09:00