Commit graph

373 commits

Author SHA1 Message Date
Mike Frysinger
6dab6add2d env: only build env_embedded and envcrc when needed
The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
compile the code when this isn't defined is pointless.  Now that the env
headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
system to only build the env objects when this is enabled.  And now that
the env code is conditionally compiled, we can drop the source code checks.

For people who want to extract the environment manually, add a new option
CONFIG_BUILD_ENVCRC that only enables the envcrc utility.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 22:53:18 +02:00
Prafulla Wadaskar
449609f5b1 tools: mkimage: Fixed build warnings
uninitialized retval variable warning fixed
crc32 APIs moved to crc.h (newly added) and build warnings fixed

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:47 +02:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Wolfgang Denk
fb364bec5f Fix include/common.h for boards with CONFIG_STATUS_LED
The reordering of include/common.h by commit fcd3c87e49 broke
boards with status LED support, resulting in
	error: #error Status LED configuration missing
errors. Undo this reordering to avoid this issue.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-27 09:58:14 +02:00
Wolfgang Denk
fcd3c87e49 Make include/common.h usable by assembler code
Commit 70ebf316 factored out the ROUND() macro into include/common.h,
not realizing that the primary use of this macro on AT91 systems was
in start.S where common.h was not included, and could not be included
because it contains a lot of C code which the assembler doesn't
understand.

This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__"
construct, and then adds an include to cpu/arm926ejs/start.S thus
solving the problem.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-27 00:12:32 +02:00
Wolfgang Denk
70ebf31633 AT91: factor out ROUND() macro
A large number of boards (all AT91 based) duplicated the ROUND()
macro in their board specific config files. Add the definition to
include/common.h and clean up the board config files.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-22 09:30:31 +02:00
Matthias Fuchs
c71103f9dc ppc4xx: Make is_pci_host() available for all 440 and 405 CPUs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-10 08:25:55 +02:00
Heiko Schocher
efbf14e9a2 all platforms: make show_boot_progress() work again
Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-08 21:38:35 +02:00
Jean-Christophe PLAGNIOL-VILLARD
8d460a573e S3C24x0: extract interrupts from timer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:35 +02:00
Peter Tyser
0f89860494 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
Use the standard lowercase "xx" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errors

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:47:17 +02:00
Wolfgang Denk
3b74e7ec58 MPC512x: remove include/mpc512x.h
Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Mike Frysinger
ecb1dc8922 Add support for Linux-like kallsysms
The kernel stores address<->symbol names in it so things can be decoded at
runtime.  Do it in U-Boot, and we get nice symbol decoding when crashing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 20:45:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
3524049cd0 at91rm9200: move serial shutdown code to serial drivers
introduce serial_exit for this purpose. Use it only when the rm9200
serial driver is active

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Wolfgang Denk
74de7aefd7 Add "source" command; prepare removal of "autoscr" command
According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-03 22:01:42 +02:00
Mike Frysinger
9c150102bc boards: get mac address from env and move load_sernum_ethaddr() to board init
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have common ppc code call a board-specific function like
load_sernum_ethaddr(), have each board call it in its own board-specific
misc_init_r() function.

The boards that get converted here are:
	- kup4k/kup4x
	- pcs440ep
	- tqm8xx

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Stefan Roese <sr@denx.de>
2009-03-20 22:39:12 +01:00
Mike Frysinger
d8d21e699d boards: move board_get_enetaddr() into board-specific init
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have the common ppc code have board-specific hooks, move the
board_get_enetaddr() function into the board-specific init functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:12 +01:00
Heiko Schocher
2f70c49e5b netloop: speed up NetLoop
NetLoop polls every cycle with getenv some environment variables.
This is horribly slow, especially when the environment is big.

This patch reads only the environment variables in NetLoop,
when they were changed.

Also moved the init part of the NetLoop function in a seperate
function.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-02-22 23:49:33 -08:00
Stefan Roese
03d3bfb008 MIPS: Add flush_dcache_range() and invalidate_dcache_range()
This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
Those functions are needed for the upcoming dcache support for the USB
EHCI driver. I chose this API because those cache handling functions are
already present in the PPC architecture.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2009-01-27 23:06:58 +09:00
Gary Jennejohn
16a28ef219 IOMUX: Add console multiplexing support.
Modifications to support console multiplexing.  This is controlled using
CONFIG_SYS_CONSOLE_MUX in the board configuration file.

This allows a user to specify multiple console devices in the environment
with a command like this: setenv stdin serial,nc.  As a result, the user can
enter text on both the serial and netconsole interfaces.

All devices - stdin, stdout and stderr - can be set in this manner.

1) common/iomux.c and include/iomux.h contain the environment setting
implementation.
2) doc/README.iomux contains a somewhat more detailed description.
3) The implementation in (1) is called from common/cmd_nvedit.c to
handle setenv and from common/console.c to handle initialization of
input/output devices at boot time.
4) common/console.c also contains the code needed to poll multiple console
devices for input and send output to all devices registered for output.
5) include/common.h includes iomux.h and common/Makefile generates iomux.o
when CONFIG_SYS_CONSOLE_MUX is set.

Signed-off-by: Gary Jennejohn <garyj@denx.de>
2008-12-07 01:23:35 +01:00
Andy Fleming
20d04774f4 Consolidate MAX/MIN definitions
There were several, now there is one (two if you count the lower-case
versions).

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-11-02 16:23:46 +01:00
Wolfgang Denk
d50c7d4be1 strmhz(): Round numbers when printing clock frequencies
Round clock frequencies for printing.

Many boards printed off clock frequencies like 399 MHz instead of the
exact 400 MHz because numberes were not rounded. This is fixed now.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:35 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Wolfgang Denk
4394f9a8c4 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
missing doc_probe() prototype.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-08 22:37:45 +02:00
Guennadi Liakhovetski
9b07773f88 ARM: Add arm1176 core with S3C6400 SoC
Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-08-31 00:39:46 +02:00
Haavard Skinnemoen
0768b7a872 Consolidate strmhz() implementation
ARM, i386, m68k and ppc all have identical implementations of strmhz().
Other architectures don't provide this function at all.

This patch moves strmhz() into lib_generic, reducing code duplication
and providing a more unified API across architectures.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-21 01:52:49 +02:00
William Juul
cfa460adfd Update MTD to that of Linux 2.6.22.1
A lot changed in the Linux MTD code, since it was last ported from
Linux to U-Boot. This patch takes U-Boot NAND support to the level
of Linux 2.6.22.1 and will enable support for very large NAND devices
(4KB pages) and ease the compatibility between U-Boot and Linux
filesystems.

This patch is tested on two custom boards with PPC and ARM
processors running YAFFS in U-Boot and Linux using gcc-4.1.2
cross compilers.

MAKEALL ppc/arm has some issues:
 * DOC/OneNand/nand_spl is not building (I have not tried porting
   these parts, and since I do not have any HW and I am not familiar
   with this code/HW I think its best left to someone else.)

Except for the issues mentioned above, I have ported all drivers
necessary to run MAKEALL ppc/arm without errors and warnings. Many
drivers were trivial to port, but some were not so trivial. The
following drivers must be examined carefully and maybe rewritten to
some degree:
 cpu/ppc4xx/ndfc.c
 cpu/arm926ejs/davinci/nand.c
 board/delta/nand.c
 board/zylonite/nand.c

Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-12 11:31:15 -05:00
Andrew Klossner
dc4b0b38d4 Fix printf errors.
The compiler will help find mismatches between printf formats and
arguments if you let it.  This patch adds the necessary attributes to
declarations in include/common.h, then begins to correct the resulting
compiler warnings.  Some of these were bugs, e.g., "$d" instead of
"%d" and incorrect arguments.  Others were just annoying, like
int-long mismatches on a system where both are 32 bits.  It's worth
fixing the annoying errors to catch the real ones.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
2008-07-09 23:55:46 +02:00
Steven A. Falco
75678c807a Make setenv() return status
Currently, the setenv function does not return an error code.
This patch allows to test for errors.

Signed-off-by: Steve Falco <sfalco@harris.com>
2008-07-01 23:03:14 +02:00
Andy Fleming
4b03ac8b51 Add ALIGN() macro
ALIGN() returns the smallest aligned value greater than the passed
in address or size.  Taken from Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-06-28 22:20:29 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Becky Bruce
61b09fc295 Change print_size to take phys_size_t
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 00:55:43 +02:00
Haavard Skinnemoen
289011207d Move definition of container_of() to common.h
AVR32 and AT91SAM9 both have their own identical definitions of
container_of() taken from the Linux kernel. Move it to common.h so
that all architectures can use it.

container_of() is already used by some drivers, and will be used
extensively by the new and improved SPI API.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-03 20:27:23 +02:00
Wolfgang Denk
c9dca3c3f3 Revert "Change env_get_char from a global function ptr to a function."
This reverts commit c0559be371
which is known to break booting from dataflash and NAND.
2008-05-12 00:40:58 +02:00
Wolfgang Denk
5379cd15dd MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-28 11:31:23 +02:00
Wolfgang Denk
4b7a6dd896 Merge branch 'master' of /home/wd/git/u-boot/lwmon5
Conflicts:

	common/cmd_bootm.c
	common/cmd_log.c
	include/common.h
	post/board/lwmon5/Makefile
	post/board/lwmon5/dsp.c
	post/board/lwmon5/dspic.c
	post/board/lwmon5/fpga.c
	post/board/lwmon5/gdc.c
	post/board/lwmon5/sysmon.c
	post/board/lwmon5/watchdog.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-25 11:32:01 +02:00
Bartlomiej Sieka
215b01bba8 Add support for calculating hashes with watchdog triggering
Implement watchodg-aware variants of hash calculation functions:
- crc32_wd()
- md5_wd()
- sha1_csum_wd()
The above functions calculate the hash of the input buffer in chunks,
triggering the watchdog after processing each chunk. The chunk size
is given as a function call parameter.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-04-25 00:01:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2ef1d9b603 Fix show_boot_progress prototype
in commit fad634071 "make show_boot_progress () weak."
show_boot_progress is supposed to be declared as weak but declared as
inline instead.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-24 23:22:52 +02:00
Kumar Gala
022f121635 85xx: Round up frequency calculations to get reasonable output
eg. because of rounding error we can get 799Mhz instead of 800Mhz.

Introduced DIV_ROUND_UP and roundup taken from linux kernel.

Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-04-24 15:42:35 +02:00
Mike Frysinger
89cdab788f crc32: use uint32_t rather than unsigned long
The envcrc.c does sizeof(unsigned long) when calculating the crc, but
this is done with the build toolchain instead of the target tool
chain, so if the build is a 64bit system but the target is 32bits,
the size will obviously be wrong. This converts all unsigned long
stuff related to crc32 to uint32_t types. Compile tested only: output
of ./tools/envcrc when run on a 32bit build system matches that of a
64bit build system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-24 13:18:17 +02:00
Yuri Tikhonov
2d2b994a30 POST: move CONFIG_POST to Makefiles
Introduce the new logical option CONFIG_HAS_POST which is set when the
platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
to determine should the POST libs be compiled for the selected target
platform, or not.

To avoid breaking u-boot linking process, the empty post/libpost.a file is
created for platforms which do not have POSTs.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-22 14:40:19 +02:00
Joakim Tjernlund
c0559be371 Change env_get_char from a global function ptr to a function.
This avoids an early global data reference.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2008-04-17 13:20:14 -07:00
Kumar Gala
79679d8002 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
The following changes are needed to be inline with ePAPR v0.81:

* r4, r5 and now always set to 0 on boot release
* r7 is used to pass the size of the initial map area (IMA)
* EPAPR_MAGIC value changed for book-e processors
* changes in the spin table layout
* spin table supports a 64-bit physical release address

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
Kumar Gala
ec2b74ffd3 85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.

Added support for using the ePAPR defined spin-table mechanism on 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Bartlomiej Sieka
27f33e9f45 Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing
Conflicts:

	common/cmd_bootm.c
	cpu/mpc8xx/cpu.c

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-26 09:38:06 +01:00
Stefan Roese
6f2eb3f3d8 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:04 +01:00
Marian Balakowicz
424c4abdd1 [new uImage] Add new uImage format support to autoscript routine
autoscript() routine is updated to accept second argument, which
is only used for FIT images and provides a FIT subimage unit name.

autoscript() routine callers must now pass two arguments. For
non-interactive use (like in cmd_load.c, cmd_net.c), new environment
variable 'autoscript_uname' is introduced and used as a FIT
subimage unit name source.

autoscript command accepts extended syntax of the addr argument:
addr:<subimg_uname>

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:00 +01:00
Marian Balakowicz
2242f53698 [new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:27:41 +01:00
Anatolij Gustschin
f33e9653c9 Fix compile warning on lib_ppc/board.c
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-15 00:55:08 +01:00
Wolfgang Denk
6f99eec3dc Merge branch 'master' of git://www.denx.de/git/u-boot-blackfin
Conflicts:

	Makefile
	doc/README.standalone

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15 00:06:18 +01:00
Mike Frysinger
6d1b6f9f89 Mark board_init_[fr] as noreturn
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-14 01:13:30 +01:00
Kumar Gala
3cfb0c51b2 Remove duplicate defines for ARRAY_SIZE
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-14 00:43:02 +01:00
Mike Frysinger
6cfcce6767 always pull in asm/blackfin.h for Blackfin ports
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04 19:26:54 -05:00
Harald Welte
be19bd5cd0 ARM: arm920/s3c24xx: IRQ demulitplexer callback
This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
plus a stub implementation of it for the S3C2410.

The purpose is to allow arm920t implementations such as the s3c24x0 to
implement interrupt handlers in u-boot without having to touch core
arm920t code.

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04 23:49:13 +01:00
Grzegorz Bernacki
66a9455b6b MPC512X: Fixed typo in macro name.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-01-12 15:37:06 +01:00
Wolfgang Denk
fc16904ce1 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-01-09 23:06:57 +01:00
James Yang
6636b62a6e Expose parse_line() globally.
Add new function readline_into_buffer() that allows the
output of readline to be put into a pointer to char buffer.

This refactoring allows other functions besides the
main command loop to also use the same input mechanism.

Signed-off-by: James Yang <James.Yang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-01-09 22:53:20 +01:00
Rafal Jaworowski
500856eb17 API for external applications.
This is an API for external (standalone) applications running on top of
U-Boot, and is meant to be more extensible and robust than the existing
jumptable mechanism. It is similar to UNIX syscall approach. See api/README
for more details.

Included is the demo application using this new framework (api_examples).

Please note this is still an experimental feature, and is turned off by
default.

Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-01-09 19:39:36 +01:00
Rafal Jaworowski
26a41790f8 Globalize envmatch()
The newly introduced API (routines related to env vars) will need to call
it.

Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
2008-01-09 18:05:27 +01:00
Stefan Roese
bb701283a8 Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2 2007-12-27 19:37:26 +01:00
Wolfgang Denk
0dcfe3a225 Merge branch 'master' of /home/wd/git/u-boot/custodians 2007-12-27 02:01:15 +01:00
Martin Krause
11d9eec479 TQM885D: adjust for doubled flash sector size + some minor fixes
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27 02:00:00 +01:00
Kumar Gala
d435793229 Handle Asynchronous DDR clock on 85xx
The MPC8572 introduces the concept of an asynchronous DDR clock with
regards to the platform clock.

Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
mode.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Stefan Roese
9caeaadf50 Merge commit 'u-boot/master' into for-1.3.1
Conflicts:

	drivers/rtc/Makefile
2007-12-11 11:34:54 +01:00
Stefan Roese
f31d38b9ee ppc4xx: Enable 405EX PCIe UTL register configuration
Till now the UTL registers on 405EX were not initialized but left with
their default values. This patch new initializes some of the UTL
registers on 405EX.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-16 14:16:54 +01:00
Grant Likely
955413f35f Revert "Correct relocation fixup for mpc5xx"
This reverts commit 3649cd99ba.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:27 -07:00
Grant Likely
e15633888a Revert "Correct fixup relocation for MPC5xxx"
This reverts commit 6f7576b20e.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:22 -07:00
Grant Likely
139365fbe5 Revert "Correct fixup relocation for mpc8220"
This reverts commit a85dd254c0.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:21 -07:00
Grant Likely
7092234236 Revert "Correct fixup relocation for mpc824x"
This reverts commit f3a52fe059.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:19 -07:00
Grant Likely
96279ab4ca Revert "Correct fixup relocation for mpc8260"
This reverts commit 5af61b2f4b.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:18 -07:00
Grant Likely
928fe33b24 Revert "Correct fixup relocation for mpc83xx"
This reverts commit 057004f4a4.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:17 -07:00
Grant Likely
c93945e8f9 Revert "[MPC512x] Correct fixup relocation"
This reverts commit 8d17979d03.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:16 -07:00
Stefan Roese
087dfdb79b ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
This patch moves some common 4xx macros and the PPC405_SYS_INFO/
PPC440_SYS_INFO structure into the common ppc4xx.h header.

Lot's of other macros are good candidates to be consolidated this way
in the future.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:50 +01:00
Stefan Roese
dbbd125721 ppc4xx: Add PPC405EX support
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:49 +01:00
Grzegorz Bernacki
7f19139389 [PPC440SPe] Improve PCIe configuration space access
- correct configuration space mapping
- correct bus numbering
- better access to config space

Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
first device on the first bus. We now allow to configure up to 16 buses;
also, scanning for devices behind the PCIe-PCIe bridge is supported, so
peripheral devices farther in hierarchy can be identified.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2007-09-07 18:20:23 +02:00
Wolfgang Denk
c5bded3c88 Add mii_init() prototype
to get rid of a *lot* of compiler warnings.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-29 14:05:30 +02:00
Wolfgang Denk
909627dca4 Merge with /home/wd/git/u-boot/custodian/u-boot-coldfire 2007-08-18 21:56:57 +02:00
Kim Phillips
6a16e0dfcc mpc83xx: move common /memory node update mechanism to cpu.c
also adds common prototypes to include/common.h.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-15 22:36:33 -05:00
Stefan Roese
d61ea14885 Merge with git://www.denx.de/git/u-boot.git 2007-08-15 14:51:27 +02:00
Stefan Roese
59530af556 Merge with git://www.denx.de/git/u-boot.git 2007-08-10 20:33:06 +02:00
Sergey Kubushyn
c74b2108e3 [ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 20:26:18 +02:00
Dave Liu
9be39a67c9 mpc83xx: Add support for the display of reset status
83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10 01:12:03 -05:00
TsiChungLiew
9e737d8476 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-08 09:47:10 +02:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Rafal Jaworowski
8993e54b6f [ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
2007-07-27 14:43:59 +02:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Grant Likely
057004f4a4 Correct fixup relocation for mpc83xx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:40 +02:00
Grant Likely
5af61b2f4b Correct fixup relocation for mpc8260
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:27 +02:00
Grant Likely
f3a52fe059 Correct fixup relocation for mpc824x
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:19 +02:00
Grant Likely
a85dd254c0 Correct fixup relocation for mpc8220
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:06 +02:00
Grant Likely
6f7576b20e Correct fixup relocation for MPC5xxx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:40 +02:00
Grant Likely
3649cd99ba Correct relocation fixup for mpc5xx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:28 +02:00
Stefan Roese
466fff1a7b ppc4xx: Add pci_pre_init() for 405 boards
This patch removes the CFG_PCI_PRE_INIT option completely, since
it's not needed anymore with the patch from Matthias Fuchs with
the "weak" pci_pre_init() implementation.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-25 15:57:39 +02:00
Wolfgang Denk
256176d3d5 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx 2007-05-16 01:12:04 +02:00
Kim Phillips
54b2d434ae mpc83xx: replace elaborate boottime verbosity with 'clocks' command
and fix CPU: to align with Board: display text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-01 12:08:36 -05:00
Michal Simek
0643631aa1 16bit read/write little endian 2007-04-21 21:02:40 +02:00
Wolfgang Denk
743571145b Minor code cleanup. 2007-02-27 14:26:04 +01:00
Grant Likely
c95c4280d7 [PATCH 3_9] Move buffer print code from md command to common function
Printing a buffer is a darn useful thing.  Move the buffer print code
into print_buffer() in lib_generic/

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:05:00 +01:00
Kim Phillips
32081125a0 Merge http://www.denx.de/git/u-boot 2006-11-28 23:35:49 -06:00
Wolfgang Denk
91650b3e4d Sequential accesses to non-existent memory must be synchronized,
at least on G2 cores.

This fixes get_ram_size() problems on MPC5200 Rev. B boards.
2006-11-06 17:06:36 +01:00
Dave Liu
90f30a710a mpc83xx: Fix the incorrect dcbz operation
The 834x rev1.x silicon has one CPU5 errata.

The issue is when the data cache locked with
HID0[DLOCK], the dcbz instruction looks like no-op inst.

The right behavior of the data cache is when the data cache
Locked with HID0[DLOCK], the dcbz instruction allocates
new tags in cache.

The 834x rev3.0 and later and 8360 have not this bug inside.

So, when 834x rev3.0/8360 are working with ECC, the dcbz
instruction will corrupt the stack in cache, the processor will
checkstop reset.

However, the 834x rev1.x can work with ECC with these code,
because the sillicon has this cache bug. The dcbz will not
corrupt the stack in cache.
Really, it is the fault code running on fault sillicon.

This patch fix the incorrect dcbz operation. Instead of
CPU FP writing to initialise the ECC.

CHANGELOG:
* Fix the incorrect dcbz operation instead of CPU FP
writing to initialise the ECC memory. Otherwise, it
will corrupt the stack in cache, The processor will checkstop
reset.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2006-11-03 19:42:22 -06:00
Jon Loeliger
d22200f020 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-19 12:03:44 -05:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Jon Loeliger
daaba9859b Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-10 17:21:42 -05:00
Wolfgang Denk
511d0c72b8 Coding style cleanup 2006-10-09 00:42:01 +02:00
Jon Loeliger
afa98843e4 Merge branch 'master' of http://www.denx.de/git/u-boot
Conflicts:

	board/stxxtc/Makefile
2006-09-19 08:51:24 -05:00
Detlev Zundel
43835aac48 Added interrupt handling capabilities for mpc5xxx processors.
Also added Linux like BUG() macros.
2006-09-01 11:59:23 +02:00
Jon Loeliger
4b7576fb80 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-08-22 10:17:59 -05:00
Wolfgang Denk
2f6fa46d41 Fixed common.h spelling error.
Patch by Cory Tusar, 30 Nov 2005
2006-08-14 23:17:47 +02:00
Wolfgang Denk
d10afb3916 Merge with /home/raj/git/u-boot 2006-08-10 15:40:49 +02:00
Rafal Jaworowski
692519b1ed Add support for PCI-Express on PPC440SPe (Yucca board). 2006-08-10 12:43:17 +02:00
Jon Loeliger
281f69ede2 Merge branch 'wd' 2006-08-09 13:36:54 -05:00
Haiying Wang
bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM.
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Markus Klotzbuecher
090eb73510 Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Marian Balakowicz
f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz
6c5879f380 Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 16:30:46 +02:00
Jon Loeliger
debb7354d1 Initial support for MPC8641 HPCN board. 2006-04-26 17:58:56 -05:00
Marian Balakowicz
cd94ba397e Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx. 2006-03-14 16:02:31 +01:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Stefan Roese
b79316f2a2 Add Sandburst Metrobox and Sandburst Karef board support packages.
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005

Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
Eran Liberty
f046ccd15c * Patch by Eran Liberty
Add support for the Freescale MPC8349ADS board.
2005-07-28 10:08:46 -05:00
wdenk
8aa1a2d115 Patch by Steven Scholz, 4 Apr 2005:
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
2005-04-04 12:44:11 +00:00
wdenk
3ec924a3cb Patch by Steven Scholz, 25 Oct 2004:
Declare reset_cpu() in include/common.h instead locally
2005-04-03 17:23:39 +00:00
wdenk
756f586a73 * Patch by Yusdi Santoso, 22 Oct 2004:
- Add support for HIDDEN_DRAGON board
  - fix endianess problem in driver/rtl1839.c

* Patch by Allen Curtis, 21 Oct 2004:
  support multiple serial ports
2005-04-03 15:51:42 +00:00
wdenk
96085e347d Fix problem introduced by previous patch. 2004-12-13 09:49:01 +00:00
wdenk
7e6bf358d8 Patch by Martin Krause, 27 Oct 2004:
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
2004-12-12 22:06:17 +00:00
wdenk
983fda8391 Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
731215ebde Patch by George G. Davis, 24 Aug 2004:
- update ARM boards to use constants from mach-types.h
2004-10-10 18:41:04 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
fabd46acff * Patch by Prakash Kumar, 27 Jun 2004:
Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h
2004-07-10 23:11:10 +00:00
wdenk
0ac6f8b749 Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads
2004-07-09 23:27:13 +00:00
wdenk
e63c8ee3dc Patch by Sam Song, 09 Jun 2004:
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2004-06-09 21:04:48 +00:00
wdenk
36c728774e * Patch by Mark Jonas, 08 June 2004:
- Make MPC5200 boards evaluate the SVR to print processor name and
    version in checkcpu() (cpu/mpc5xxx/cpu.c).

* Patch by Kai-Uwe Bloem, 06 May 2004:
  Fix endianess problem in cramfs code
2004-06-09 17:45:32 +00:00
wdenk
f39748ae8e * Patch by Paul Ruhland, 17 May 2004:
- Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2
2004-06-09 13:37:52 +00:00
wdenk
547b4cb25e Patches by Jon Loeliger, 11 May 2004:
(partially, as they contained a lot of crap)
2004-06-09 00:51:50 +00:00
wdenk
1114257c9d Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
2004-06-06 21:35:06 +00:00
wdenk
e9132ea94c Clean up the TQM8xx_YYMHz configurations; allow to use the same
binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.
2004-04-24 23:23:30 +00:00
wdenk
04a85b3b36 * Patches by Pantelis Antoniou, 30 Mar 2004:
- add auto-complete support to the U-Boot CLI
  - add support for NETTA and NETPHONE boards; fix NETVIA board

* Patch by Yuli Barcohen, 28 Mar 2004:
  - Add support for MPC8272 family including MPC8247/8248/8271/8272
  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
  - Change configuration method for MPC8260ADS family
2004-04-15 18:22:41 +00:00
wdenk
eeb1b77b7d * Patch by Pierre Aubert, 18 Mar 2004:
- Unify video mode handling for Chips & Technologies 69000 Video
    chip and Silicon Motion SMI 712/710/810 Video chip
  - Add selection of the video output (CRT or LCD) via 'videoout'
    environment variable for the Silicon Motion
  - README update

* Patch by Pierre Aubert, 18 Mar 2004:
  include/common.h typo fix

* Patches by Tolunay Orkun, 17 Mar 2004:
  - Add support for bd->bi_iic_fast[] initialization via environment
    variable "i2cfast" (CONFIG_I2CFAST)
  - Add "i2cfast" u-boot environment variable support for csb272
2004-03-23 22:53:55 +00:00
wdenk
42dfe7a184 Code cleanup; make several boards compile & link. 2004-03-14 22:25:36 +00:00
wdenk
c40b295682 * Patch by Rune Torgersen, 27 Feb 2004:
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)

* Patch by Masami Komiya, 27 Feb 2004:
  Fix rarpboot: add autoload by NFS

* Patch by Dan Eisenhut, 26 Feb 2004:
  fix flash_write return value in saveenv

* Patch by Stephan Linz, 11 Dec 2003
  expand config.mk to avoid trigraph warnings on NIOS

* Rename "BMS2003" board into "HMI10"
2004-03-13 23:29:43 +00:00
wdenk
cbd8a35c6d * Patch by Masami Komiy, 22 Feb 2004:
Add support for NFS for file download

* Minor code cleanup
2004-02-24 02:00:03 +00:00
wdenk
bf9e3b38f7 * Some code cleanup
* Patch by Josef Baumgartner, 10 Feb 2004:
  Fixes for Coldfire port

* Patch by Brad Kemp, 11 Feb 2004:
  Fix CFI flash driver problems
2004-02-12 00:47:09 +00:00
wdenk
ba56f62576 Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
select MDI port based on enabled EMAC device.
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
base PrPMC board.
2004-02-06 23:19:44 +00:00
wdenk
c178d3da6f * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
see doc/README.MPC866 for details;
  implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
  calculate CPU clock frequency from PLL register values.

* Add support for 128 MB RAM on TQM8xxL/M modules
2004-01-24 20:25:54 +00:00
wdenk
c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00
wdenk
c83bf6a2d0 Add a common get_ram_size() function and modify the the
board-specific files to invoke that common implementation.
2004-01-06 22:38:14 +00:00
wdenk
180d3f74e4 * Fix problems caused by Robert Schwebel's cramfs patch
* Patch by Scott McNutt, 02 Jan 2004:
  Add support for the Nios Active Serial Memory Interface (ASMI)
  on Cyclone devices

* Patch by Andrea Marson, 16 Dec 2003:
  Add support for the PPChameleon ME and HI modules

* Patch by Yuli Barcohen, 22 Dec 2003:
  Add support for Motorola DUET ADS board (MPC87x/88x)
2004-01-04 16:28:35 +00:00
wdenk
b6e4c4033c * Patch by Denis Peter, 8 Dec 2003
- add support for the PATI board (MPC555)
  - add SPI support for the MPC5xx

* Patch by Anders Larsen, 08 Dec 2003:
  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
  cleanup some redundand #defines
2004-01-02 16:05:07 +00:00
wdenk
d4ca31c40e * Cleanup lowboot code for MPC5200
* Minor code cleanup (coding style)

* Patch by Reinhard Meyer, 30 Dec 2003:
  - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
  - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
  - turned debug print of PHY registers into a function (called in two places)
  - added support for EMK MPC5200 based modules

* Fix MPC8xx PLPRCR_MFD_SHIFT typo

* Add support for TQM866M modules

* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)

* Fix a few compiler warnings
2004-01-02 14:00:00 +00:00
wdenk
7cb22f97ee * Make CPU clock on ICA-IP board controllable by a "cpuclk"
environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).
2003-12-27 19:24:54 +00:00
wdenk
42d1f0394b * Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
  - Added Motorola MPC8560ADS board support (board/mpc8560ads)

* Minor code cleanup
2003-10-15 23:53:47 +00:00
wdenk
15647dc7fd * Patches by Thomas Lange, 09 Oct 2003:
- fix cmd_ide.c for non ppc boards (read/write functions did not
    add ATA base address)
  - fix for shannon board
  - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code

* Patch by Sangmoon Kim, 07 Oct 2003:
  add support for debris board
2003-10-09 19:00:25 +00:00
wdenk
bdccc4fedc * Map ISP1362 USB OTG controller for NSCU board
* Patch by Brad Parker, 02 Aug 2003:
  fix sc520_cdp problems

* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)

* Allow erase command to cross flash bank boundaries
2003-08-05 17:43:17 +00:00
wdenk
27b207fd0a * Implement new mechanism to export U-Boot's functions to standalone
applications: instead of using (PPC-specific) system calls we now
  use a jump table; please see doc/README.standalone for details

* Patch by Dave Westwood, 24 Jul 2003:
  added support for Unity OS (a proprietary OS)
2003-07-24 23:38:38 +00:00
wdenk
2535d60277 * Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
2003-07-17 23:16:40 +00:00
wdenk
945af8d723 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
* Add support for MGT5100 and MPC5200 processors
2003-07-16 21:53:01 +00:00
wdenk
b0fce99bfc Fix some missing commands, cleanup header files
(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
2003-06-29 21:03:46 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
wdenk
6dd652fa4d Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes
2003-06-19 23:40:20 +00:00
wdenk
52f52c1494 Patches by Robert Schwebel, 14 Jun 2003:
- add support for Logotronic DL datalogger board
- cleanup serial line after kermit binary download
- add debugX macro (debug level support)
- update mach-types.h to latest arm.linux.org.uk master list.
2003-06-19 23:04:19 +00:00
wdenk
71f9511803 * Fix CONFIG_NET_MULTI support in include/net.h
* Patches by Kyle Harris, 13 Mar 2003:
  - Add FAT partition support
  - Add command support for FAT
  - Add command support for MMC
  ----
  - Add Intel PXA support for video
  - Add Intel PXA support for MMC
  ----
  - Enable MMC and FAT for lubbock board
  - Other misc changes for lubbock board
2003-06-15 22:40:42 +00:00
wdenk
3b57fe0a70 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
  _time_  (!) if the environment is embedded within the U-Boot image,
  or in a separate flash sector.

* Cleanup CFG_DER #defines in config files (wd maintained only)
2003-05-30 12:48:29 +00:00
wdenk
7aa7861471 * Add support for Promess ATC board
* Patch by Keith Outwater, 28 Apr 2003:
  - Miscellaneous corrections and additions to GEN860T board specific code.
  - Added GEN860_SC variant to GEN860T.
  - Miscellaneous corrections to GEN860T documentation.
  - Correct duplicate entry in U-Boot CREDITS file.
  - Add GEN860T_SC entry in MAINTAINERS file.
  - Update CREDITS file with GEN860T_SC info.

* Update Smiths Aerospace addresses in MAINTAINERS file

* Fix error handling in hush's version of "run" command
2003-05-03 15:50:43 +00:00
wdenk
d126bfbdbd Add support for TQM862L modules 2003-04-10 11:18:18 +00:00
wdenk
0db5bca807 * Patch by Martin Winistoerfer, 23 Mar 2003
- Add port to MPC555/556 microcontrollers
  - Add support for cmi customer board with
    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.

* Patch by Rick Bronson, 28 Mar 2003:
  - fix common/cmd_nand.c
2003-03-31 17:27:09 +00:00
wdenk
3bac351370 * Patch by Josef Wagner, 12 Mar 2003:
- 16/32 MB and 50/80 MHz support with auto-detection for IP860
  - ETH05 and BEDBUG support for CU824
  - added support for MicroSys CPC45
  - new BOOTROM/FLASH0 and DOC base for PM826

* Patch by Robert Schwebel, 12 Mar 2003:
  Fix the chpart command on innokom board

* Name cleanup:
  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  s/PPCBoot/U-Boot/ in some files
  s/pImage/uImage/  in some files

* Patch by Detlev Zundel, 15 Jan 2003:
  Fix '' command line quoting

* Patch by The LEOX team, 19 Jan 2003:
  - add support for the ELPT860 board
  - add support for Dallas ds164x RTC
2003-03-12 10:41:04 +00:00
wdenk
6069ff2653 * Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS

* Add image information to README

* Fix dual PCMCIA slot support (when running with just one
  slot populated)

* Add VFD type detection to trab board

* extend drivers/cs8900.c driver to synchronize  ethaddr  environment
  variable with value in the EEPROM

* Start adding MIPS support files
2003-02-28 00:49:47 +00:00
stroese
ad10dd9aaf Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY). 2003-02-14 11:21:23 +00:00
wdenk
c7de829c79 * Patch by Thomas Frieden, 13 Nov 2002:
Add code for AmigaOne board
  (preliminary merge to U-Boot, still WIP)

* Patch by Jon Diekema, 12 Nov 2002:
  - Adding URL for IEEE OUI lookup
  - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
    being defined.
  - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
    root-on-nfs macros are designed to switch how the default boot
    method gets defined.
2002-11-19 11:04:11 +00:00
wdenk
2262cfeef9 * Patch by Daniel Engström, 13 Nov 2002:
Add support for i386 architecture and AMD SC520 board

* Patch by Pierre Aubert, 12 Nov 2002:
  Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
wdenk
7f6c2cbc2b * Vince Husovsky, 7 Nov 2002:
Add "-n" to linker options to get rid of "Not enough room for
  program headers" problem

* Patch by David Müller, 05 Nov 2002
  Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
  so we can use an already existing name

* Patch by Pierre Aubert, 05 Nov 2002
  Hardware related improvements in FDC boot code

* Patch by Holger Schurig, 5 Nov 2002:
  Make the PXA really change it's frequency

* Patch by Pierre Aubert, 05 Nov 2002
  Add support for slave serial Spartan 2 FPGAs

* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
  drivers
2002-11-10 22:06:23 +00:00
wdenk
e221174377 Initial revision 2002-11-02 23:30:20 +00:00