Commit graph

20 commits

Author SHA1 Message Date
Tom Rini
fc9b0b8043 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11 18:40:49 -05:00
Nikhil Badola
3f041f011d drivers: usb: fsl: Define USB configs for LS102XA
Define USB configs for LS1021XA such as CONFIG_SYS_FSL_USB1_ADDR,
CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:27:22 -08:00
Peng Fan
229dbba9b1 usb:ehci-mx6 add phy mode query function
usb_phy_enable should return status bit, but not phy mode bit, thus
add a new function usb_phy_mode to query the PHY for it's mode and
make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'.

Include a new board weak function board_usb_phy_mode. If board code
does not reimplement this function, it just call usb_phy_mode and return
usb_phy_mode's return value. The reason to include such a weak function
is: " SOC OTG core <--connect--> board HOST port, but no pin id for
the board host port, so board can not use usb_phy_mode to return the
phy mode, but define it's own rule."

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
2014-11-14 20:56:54 +01:00
Nikhil Badola
15231f6dd1 drivers/usb : Define usb control register mask for w1c bits
Define and use CONTROL_REGISTER_W1C_MASK to make sure that
w1c bits of usb control register do not get reset while
writing any other bit

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-05-16 16:24:27 -05:00
Nikhil Badola
896720ceb2 fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0
Increase TXFIFOTHRES field value in TXFILLTUNING register of usb for T4 Rev 2.0.
This decreases data burst rate with which data packets are posted from the TX
latency FIFO to compensate for latencies in DDR pipeline during DMA.
This avoids Tx buffer underruns and leads to successful usb writes

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:49 -07:00
ramneek mehresh
77354e9d50 powerpc/usb:Differentiate USB controller base address
Introduce different macros for storing addresses of multiple
USB controllers. This is required for successful initialization
and usage of multiple USB controllers inside u-boot

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
2013-10-24 09:35:09 -07:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Benoît Thébaudeau
ba5dfc11ba imx: mx5: Remove legacy iomux support
Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-05 17:55:05 +02:00
Benoît Thébaudeau
31ac2d0c6a ehci-mxc: Make EHCI power/oc polarities configurable
Make EHCI power and overcurrent polarities configurable. If not set, these new
configurartions keep the default register values so that existing board files
do not have to be changed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Benoît Thébaudeau
8eeb19be75 mx31: Move EHCI definitions to ehci-fsl.h
The EHCI definitions in i.MX31's imx-regs.h are MXC-generic, so move them to
ehci-fsl.h so that all MXC SoCs can use them.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:43 +01:00
Marek Vasut
0f8c86b549 USB: MX5: Abstract out mx51 USB pixmux configuration
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
2011-12-11 14:49:37 +01:00
Wolfgang Grandegger
1ca5620253 USB: MX5: add generic USB EHCI support for mx51 and mx53
It's derived from ehci-mxc and uses the header files of the
ehci-fsl interface. The callback board_ehci_hcd_init() has
been introduced to allow for board-specific setup when USB
is started.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
CC: Stefano Babic <sbabic@denx.de>
CC: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:49:31 +01:00
Wolfgang Grandegger
0255f2d87c ehci-fsl: correct size of ehci caplength
According to the EHCI specification the Capability Register Length
has a size of 8 bits.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-11 14:40:38 +01:00
Anatolij Gustschin
fff6ec382c Fix building for 83xx boards with USB support
Commit 29c6fbe047 broke
building for 83xx boards with USB support:

ehci-fsl.c: In function 'ehci_hcd_init':
ehci-fsl.c:43: error: 'CONFIG_SYS_FSL_USB_ADDR' undeclared (first use in this function)
ehci-fsl.c:43: error: (Each undeclared identifier is reported only once
ehci-fsl.c:43: error: for each function it appears in.)
make[1]: *** [ehci-fsl.o] Error 1

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-10-21 20:00:41 +02:00
Damien Dusha
29c6fbe047 MPC5121: Add USB EHCI support
Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com>
Signed-off-by: Damien Dusha <d.dusha@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

Coding style cleanup; slight file restructuring.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
2010-10-18 22:33:32 +02:00
Peter Tyser
64917ca389 PCIe, USB: Replace 'end point' references with 'endpoint'
When referring to PCIe and USB 'endpoint' is the standard naming
convention.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
2010-01-17 23:06:44 +01:00
Kim Phillips
4e04f16020 usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error
fix a stray CONFIG_MPC83XX that escaped commit
0f89860494.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-07-09 21:33:14 +02:00
Vivek Mahajan
a07bf180ef mpc85xx: USB: Add support
The following patch adds 85xx-specific USB support and also
revamps Copyright in immap_85xx.h

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-12 20:47:17 +02:00
Vivek Mahajan
4ef01010aa mpc83xx: USB: Reorganized its support
The following patch reorganizes/reworks the USB support for mpc83xx
as under:-

  * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to
    cpu/mpx83xx/cpu_init.c

  * Board specific usb_phy_type is read from the environment

  * Adds USB EHCI specific structure in include/usb/ehci-fsl.h

  * Copyrights revamped in most of the following files

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-12 20:47:17 +02:00
Vivek Mahajan
ed90d2c871 mpc8xxx: USB: Relocates ehci-fsl.h to include/usb
The following patch moves 8xxx-specifc USB #defines from
drivers/usb/host/ehci-fsl.h to include/usb.

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-12 20:47:17 +02:00
Renamed from drivers/usb/host/ehci-fsl.h (Browse further)