Commit graph

11 commits

Author SHA1 Message Date
Hannes Petermaier
662a47657a board/BuR/tseries: Rework default-environment settings.
Due to several changes of the boot-process we've redesigned the default-
environment settings completly.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:19 -05:00
Hannes Petermaier
7ae47f6b5a board/BuR/common: Introduce Network Console and common environment for it
It is often necessary to "break in" into boards bootloader commandline if
something fails or even for development purposes some parameters have to be
changed.

So we enable u-boot's CONFIG_NETCONSOLE feature.
We also modify Networksettings to apply with this new use-case.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:18 -05:00
Hannes Petermaier
c05c29677c board/BuR/tseries: Enable EXT4 support
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:17 -05:00
Hannes Petermaier
df7709455d board/BuR/tseries: Enable U-Boot BOOTCOUNT feature
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:17 -05:00
Hannes Petermaier
cf1331f853 board/BuR/tseries: Enable HW-Watchdog
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:17 -05:00
Hannes Petermaier
fbd5aeda48 board/BuR/common: Take usage of am335x LCD-Display
a summary screen to the lcd.
Values are taken from environment and or devicetree blob.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:16 -05:00
Nikita Kiryanov
88e34e5ff7 spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*
Currently, CONFIG_SPL_SPI_* #defines are used for controlling SPI boot in
SPL. These #defines do not allow the user to select SPI mode for the SPI flash
(there's no CONFIG_SPL_SPI_MODE, so the SPI mode is hardcoded in
spi_spl_load.c), and duplicate information already provided by
CONFIG_SF_DEFAULT_* #defines.

Kill CONFIG_SPL_SPI_*, and use CONFIG_SF_DEFAULT_* instead.

Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Hannes Petermaier <hannes.petermaier@br-automation.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-24 17:40:10 +05:30
Tom Rini
e017fd61c5 tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND
In the case of SPL on these boards we only need environment for
SPL_USBETH, so it's safe to normally use ENV_IS_NOWHERE and SPL+NAND
does not support environment today.

Cc: Hannes Petermaier <oe5hpm@oevsv.at>
Signed-off-by: Tom Rini <trini@ti.com>
2014-08-25 08:52:34 -04:00
pekon gupta
68128e0a86 omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT
OMAP3 used GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT macros
to configure GPMC controller for x7 or x8 bit device connected to its interface.
Now this information is encoded in CONFIG_SYS_NAND_DEVICE_WIDTH macro, so above
macros can be completely removed.

Signed-off-by: Pekon Gupta <pekon@ti.com>
2014-06-06 17:46:07 -04:00
Hannes Petermaier
46c8ebc8cd Add board_mmc_init(...) function for init mmc1 only
Since B&R boards uses only MMC-Controller #1, it only
wastes time if we initialize #0 first to see that there is nothing.

Cc: <trini@ti.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-05-23 11:15:53 +03:00
Hannes Petermaier
893c04e17c board: Add support for B&R T-Series Motherboard
Adds support for Bernecker & Rainer Industrieelektronik GmbH T-Series
Motherboard, using TI's AM3352 SoC.

Most of code is derived from TI's AM335x_EVM

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-02-21 13:55:40 -05:00