Commit graph

58 commits

Author SHA1 Message Date
Markus Klotzbücher
32d6f1bc09 Fix problems with usb storage devices on MPC5200 /TQM5200
The MPC5200 OHCI controller operates in big endian, so
CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.

Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2008-01-09 10:03:04 +01:00
Bartlomiej Sieka
d78791ae91 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-10-25 17:20:01 +02:00
Martin Krause
b31f64343e TQM5200: fix spurious characters on second serial interface
With this patch PSC3 is configured as UART. This is done, because if
the pins of PSC3 are not configured at all (-> all pins are GPI),
due to crosstalk, spurious characters may be send over the RX232_2_TXD
signal line.

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-10-24 00:29:51 +02:00
Wolfgang Denk
72e55d03fc Merge branch 'master' of /.automount/castor-vlab/root/home/wd/git/u-boot/master/ 2007-10-10 16:39:09 +02:00
Marian Balakowicz
2b2a587d6d tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-10-05 10:40:54 +02:00
Bartlomiej Sieka
e1f601b572 tqm5200: Restore customary env. variable boot commands for powerpc kernels
- update default definitions of kernel_addr and fdt_addr env. variables
- make arch/powerpc booting the default scenario
- update MTD partition layout to match the above

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-09-13 16:33:59 +02:00
Grant Likely
cf2817a84c Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200

Tested on: lite5200b

Note: the fixup functions have not been moved to a common place.  This
patch is targeted for immediate merging as in solves a build issue, but
the final name/location of the fixups is still subject to debate.  I
propose to merge this now, and move the fixups in the next merge window
to be usable by all targets.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-06 09:46:23 -06:00
Kim Phillips
3bb342fc85 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 01:46:25 +02:00
Wolfgang Denk
afaac86fe2 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-12 14:27:39 +02:00
Markus Klotzbuecher
78549bbf44 Merge with git://www.denx.de/git/u-boot.git 2007-08-07 22:30:29 +02:00
Jon Loeliger
a1aa0bb502 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:22:23 -05:00
Jon Loeliger
af075ee96e Clear up confusion over the CMD_POST and POST_DIAG mess.
For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
when it really means just CONFIG_CMD_DIAG.  There is no CMD_POST.
Clear this mess up some.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08 17:02:01 -05:00
Jon Loeliger
2694690e28 include/configs: Use new CONFIG_CMD_* in TQM board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 11:04:15 +02:00
Wolfgang Denk
1636d1c852 Coding stylke cleanup; rebuild CHANGELOG 2007-06-22 23:59:00 +02:00
Bartlomiej Sieka
8f8416fada TQM5200: Add Flat Device Tree support, update default env. accordingly.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-06-08 14:52:22 +02:00
Markus Klotzbuecher
51d8e81322 Merge git://www.denx.de/git/u-boot into 2007_05_15-testing 2007-05-29 16:37:57 +02:00
Bartlomiej Sieka
c99512d6bd MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:53:43 +02:00
Markus Klotzbuecher
f2b07ebd32 Merge with git://www.denx.de/git/u-boot.git#testing-USB 2007-03-23 09:52:17 +01:00
Reinhard Thies
6abaee4262 Adjusted default environment for cam5200 board. 2007-01-10 16:51:05 +01:00
Marian Balakowicz
d9384de2f5 CAM5200 flash driver modifications:
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
2007-01-10 00:26:15 +01:00
Wolfgang Denk
83dc830b16 Merge with /home/mk/git/u-boot-generic_ohci#generic_ohci 2006-11-27 16:52:20 +01:00
Markus Klotzbuecher
7b59b3c7a8 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
to choose between the old and the generic OHCI drivers.
2006-11-27 11:44:58 +01:00
Markus Klotzbuecher
53e336e9ff Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
and adapted board configs TQM5200 and yosemite accordingly. This commit
also makes the maximum number of root hub ports configurable 
(CFG_USB_OHCI_MAX_ROOT_PORTS).
2006-11-27 11:43:09 +01:00
Wolfgang Denk
78d620ebb5 Updates for TQM5200 modules:
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions
2006-11-23 22:58:58 +01:00
Wolfgang Denk
2751a95abd Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
Marian Balakowicz
7299712c86 Update for CAM5200 board:
- Map in a additional chip selects CS4 and CS5.
  - Modify the port configration, configure six UARTs and no PCI,
    ATA and USB.
  - Add custom flash driver to handle specific byte swapping
2006-10-03 20:28:38 +02:00
Wolfgang Denk
15f29f06ed Merge with /home/tur/proj/fo300/u-boot 2006-08-25 00:13:37 +02:00
Bartlomiej Sieka
ddde6b7cf8 Add a fix for a buggy USB device on the FO300 board. 2006-08-22 10:38:18 +02:00
Wolfgang Denk
5196a7a03b Minor cleanup 2006-08-18 23:27:33 +02:00
Marian Balakowicz
6d3bc9b8cf Add support for WTK FO300 board (TQM5200 based). 2006-08-18 19:14:46 +02:00
Wolfgang Denk
4c4aca8166 Fix preboot message on TQM5200 after switching to hush parser. 2006-07-26 10:33:37 +02:00
Wolfgang Denk
135ae0062f Add configuration for cam5200 board (based on TQM5200S). 2006-07-22 01:20:03 +02:00
Wolfgang Denk
5078cce81c * Cleanup TQM5200 board configurations:
- make highboot configurations use environment at high end, too,
    to avoid flash fragmentation
  - always use redundand environment
  - don't enable video code for modules without graphics controller
  - provide useful (though different) mtdparts settings
  - get rid of CONFIG_CS_AUTOCONF which was always set anyway

* Extend mkconfig tool to print more useful target name
2006-07-21 11:16:34 +02:00
Wolfgang Denk
978b10964c Add support for high-boot on TQM5200 and TQM5200S boards.
Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.

To actually "high boot", set jumper X30 on the STK52xx.

Patch by Martin Krause, 12 Jul 2006
2006-07-19 18:01:38 +02:00
Wolfgang Denk
45a212c4d7 Add support for new TQM5200 revisions
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
  (requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19 17:52:30 +02:00
Wolfgang Denk
edd0b509ba Adjust RTC century handling on STK52xx board to match Linux driver.
Patch by Martin Krause, 12 Jun 2006
2006-07-19 14:44:03 +02:00
Wolfgang Denk
f3e06df7e8 Enable buffered flash writes for TQM5200 board. 2006-07-18 17:44:19 +02:00
Wolfgang Denk
cd65a3dc87 Adjust TQM5200 make targets
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
2006-06-16 16:11:34 +02:00
Wolfgang Denk
953c5b6f8b Adjust "echo" as a default command
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:51:59 +01:00
Wolfgang Denk
d00de23b15 Increase malloc arena on TQM5200 board to 256 kB.
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
2005-12-01 00:55:19 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk
f57f70aab9 Support passing of OF flat trees to the kernel.
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
Wolfgang Denk
d534f5cc38 Add JFFS2 support for TQM5200 board 2005-08-23 22:27:41 +02:00
Wolfgang Denk
6617aae9b9 Add new board specific commands for TQM5200/STK52XX
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
Wolfgang Denk
4f562f145a Add RTC support for STK52XX.200
Patch by Martin Krause, 7 Apr. 2005
2005-08-18 11:51:12 +02:00
wdenk
414eec35e3 Fix problems with SNTP support;
enable SNTP support in some boards.
2005-04-02 22:37:54 +00:00
wdenk
83e40ba75d * Patch by Detlev Zundel, 31 Mar 2005:
Cleanup duplicate definition of overwrite_console()

* Update TQM5200 configuration;
  prepare for Rev. 200 starter kit boards
2005-03-31 18:42:15 +00:00
wdenk
8f0b7cbe80 Patches by Martin Krause, 22 Mar 2005:
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h
2005-03-27 23:41:39 +00:00
wdenk
e632515387 * Fix RTC configuration for PPChameleon board
* Cleanup, fix typo in include/configs/TQM5200.h
2005-03-17 16:43:10 +00:00