Commit Graph

25 Commits

Author SHA1 Message Date
Tom Rini 89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Tom Rini 78d1e1d0a1 configs: Re-sync almost all of cmd/Kconfig
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:40 -04:00
Sam Protsenko e6c0bc0643 usb: gadget Move: CONFIG_G_DNL_* to Kconfig
And also reformat defconfigs using "make savedefconfig" rule.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko 65403f3010 usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig
Description was borrowed from kernel dwc3 Kconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko aaa4a9e313 usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko 3457bbaf22 usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
  - add next options to Kconfig selecting USB_GADGET_DUALSPEED:
    - USB_GADGET_ATMEL_USBA
    - USB_GADGET_DWC2_OTG
    - USB_DWC3
    - CI_UDC
  - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED

While at it, make some related fixes:
  - remove DUALSPEED from configs that don't enable gadget support:
    - kwb.h
    - tseries.h
  - add missing USB_GADGET option to next configs:
    - novena_defconfig
    - pcm051_rev*_defconfig
    - xfi3_defconfig

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Michal Simek 58ed7f6693 ARM64: zynqmp: Use i2c cadence DM driver
Use i2c cadence DM driver for all zynqmp targets except ZCU102
because I2C muxes and PCA953x are not supported in the tree yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-04-13 18:29:07 +02:00
Michal Simek f746b4cfd0 ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
Enable missing GPIO options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Michal Simek aa5b52f56c ARM64: zynqmp: Extend early malloc space to be able to run DM drivers
DM drivers need more malloc space for early DM models allocation.
Use 4k instead of 1k.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek 885581a56b ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
There are mini configurations which need to be fit to OCM that's why
these options shouldn't be enabled by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek a3afb4a4bf ARM64: Move HUSH enabling from board file to defconfig
Simplify board config file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek a1108da731 ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig
This option enable adding new platform suport just by adding defconfig
and DTS file which will target generic configuration for SoC.
Make no sense to extend Kconfig just create a pointer between DTS and
configuration file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Sam Protsenko f9d0fd8a56 usb: gadget: Move CONFIG_USB_GADGET to Kconfig
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-25 15:29:48 -04:00
Bin Meng 6b33687995 defconfig: Reorder boards' defconfig files
Some boards' defconfig files are out of order. Clean this up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-22 12:16:31 -04:00
Michal Simek ce0335f2b4 mmc: Kconfig: Add Arasan SDHCI entry
Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Siva Durga Prasad Paladugu 78cb965af0 zynqmp: nand: Add Nand driver support for zynqmp
Add nand driver support for zynqmp. The Nand
controller used in ZynqMP is Arasan Nand Flash
controller.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[scottwood: Fix checkpatch warning]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-12 17:27:28 -06:00
Michal Simek a7159e204b ARM64: zynqmp: Enable FIT config option via Kconfig
Remove configuration options from board file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Michal Simek 596e5782e7 net: gem: Move gem to Kconfig
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-07 10:14:28 +01:00
Michal Simek c2490bf546 ARM: zynqmp: Enable DM and OF binding
SPI requires DM and OF that's why enable DM for ZynqMP
and start to use configuration based on embedded OF.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-04 14:49:53 +01:00
Michal Simek d1221462fe zynqmp: enable CONFIG_NET_RANDOM_ETHADDR
We have to set a MAC address to use network.
Otherwise, the tftpboot command fails with the following message:

  Gem.e000b000 Waiting for PHY auto negotiation to complete........ done
  *** ERROR: `ethaddr' not set

Since commit 92ac520821 ("net: Remove all references to
CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR.

The easiest way to set a MAC address is to enable
CONFIG_NET_RANDOM_ETHADDR.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:28:21 +02:00
Siva Durga Prasad Paladugu 16fa00a711 zynqmp: usb: Add usb dwc3 driver support for zynqmp
Added usb dwc3 driver support for zynqmp
this also supports the DFU and LTHOR to download
the linux images on to RAM and cen be booted from
those linux images.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:30 +02:00
Michal Simek be1a8c27c4 configs: zynqmp: Enable networking by default for EP108
Enable networking for EP108 by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:26:51 +02:00
Nikita Kiryanov 181bd9dc61 kconfig: add config option for shell prompt
Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  <boards>_common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-13 07:19:33 -04:00
Siva Durga Prasad Paladugu f994bdfe13 Kconfig: zynqmp: Move CONFIG_SYS_TEXT_BASE to defconfig
Move CONFIG_SYS_TEXT_BASE of ZynqMP_ep to its
respective defconfig

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00
Siva Durga Prasad Paladugu 0b54a9dd09 zynqmp: Define ep config for ZynqMP
Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00