Commit graph

684 commits

Author SHA1 Message Date
Bastian Ruppert
de57550294 da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
negotiation is enabled in RMII mode. Some boards based on da850 need
to suppress this procedure.

CC: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
CC: Lad, Prabhakar <prabhakar.lad@ti.com>
CC: Hadli, Manjunath <manjunath.hadli@ti.com>
CC: sbabic@denx.de
Acked-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <trini@ti.com>
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
2012-10-01 10:02:13 -07:00
Tom Rini
cec2655c3b Merge branch 'master' of git://git.denx.de/u-boot-net 2012-09-27 12:06:07 -07:00
Marek Vasut
c0b5a3bbb0 FEC: Replace magic contants
Replace the magic contant 1 << 24 with properly defined bits.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2012-09-27 12:22:10 -05:00
Marek Vasut
67449098a8 FEC: Rework the TX wait mechanism
The mechanism waiting for transmission to finish in fec_send() now
relies on the E-bit being cleared in the TX buffer descriptor. In
case of data cache being on, this means invalidation of data cache
above this TX buffer descriptor on each test for the E-bit being
cleared.

Apparently, there is another way to check if the transmission did
complete. This is by checking the TDAR bit in the X_DES_ACTIVE
register. Reading a register does not need any data cache invalidation,
which is beneficial.

Rework the sequence that wait for completion of the transmission so that
the TDAR bit is tested first and afterwards check the E-bit being clear.
This cuts down the number of cache invalidation calls to one.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2012-09-27 12:22:10 -05:00
Marek Vasut
bc1ce150b9 FEC: Remove endless loop in the FEC driver
The FEC hardware sometimes errors out on data transfer and hangs in
the tightloop adjusted by this patch. So add timeout into the tightloop
to make such a hang recoverable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2012-09-27 12:22:09 -05:00
Marek Vasut
efe24d2e17 FEC: Properly align address over the buffers for cache ops
Align the address that's to be invalidated/flushed properly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Benoit Thebaudeau <benoit.thebaudeau@advans>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2012-09-27 12:22:09 -05:00
Marek Vasut
e2a66e6097 FEC: Do not pass unaligned buffer to network stack
Do not pass unaligned RX buffer to the upper layers. The upper layer,
especially in the ARP case, recycles the buffer and passes it back into
the FEC, into it's TX path. With caches enabled, the FEC hangs on this
from time to time.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Benoit Thebaudeau <benoit.thebaudeau@advans>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-27 12:22:09 -05:00
Priyanka Jain
f91ba0ecbc net: Add Vitesse VSC8662 PHY support
-VSC8662 is Dual Port 10/100/1000Base-T Phy,
 100Base-FX/1000/Base-X Gigabit Ethernt Transceiver Phy.

-Its register set and features are similar to
 other Vitesse Phys

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2012-09-27 12:21:59 -05:00
Valentin Longchamp
b737337aaf net/phy: support the mv88e6352 switch
This patch add support for the configuration of an external switch from
the 88E6xxx series from Marvell trough an MDIO link using indirect
adressing. This can be used if we do not want to use an EEPROM for the
configuration.

This driver is not generic and was not tested on other switches than the
88e6352. This is proposed as a first implementation that is somewhat
limited but works and that can be used as a basis for further
developments for this switch family.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-27 12:21:56 -05:00
Michal Simek
185f7d9afc net: Add driver for Zynq Gem IP
Device driver for Zynq Gem IP.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Joe Hershberger <joe.hershberger@gmail.com>
CC: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2012-09-26 12:36:32 -05:00
Tom Rini
5675b50916 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2012-09-25 12:23:55 -07:00
Joe Hershberger
8a0eccb105 net: Filter incoming netconsole packets by IP
Check the incoming packets' source IP address... if ncip isn't set to a
broadcast address, only listen to the client at ncip.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-24 13:55:44 -05:00
Joe Hershberger
e827fec2b2 net: Allow netconsole settings to change after nc_start
Refresh the netconsole settings from the env before each packet instead
of only on netconsole init.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-24 13:55:43 -05:00
Joe Hershberger
f8be7d659c net: Improve the speed of netconsole
Previously u-boot would initialize the network interface for every
network operation and then shut it down again.  This makes sense for
most operations where the network in not known to be needed soon after
the operation is complete.  In the case of netconsole, it will use the
network for every interaction with the shell or every printf.  This
means that the network is being reinitialized very often.  On many
devices, this intialization is very slow.

This patch checks for consecutive netconsole actions and leaves the
ethernet hardware initialized between them.  It will still behave the
same old way for all other network operations and any time another
network operation happens between netconsole operations.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-24 13:55:43 -05:00
Joe Hershberger
2c8fe5120f net: Make the netconsole buffer size configurable
Allow a board to configure a larger buffer for netconsole, but leave
the default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-09-24 13:55:43 -05:00
Nobuhiro Iwamatsu
dcd5a593f5 net: sh_eth: Add support R8A7740 of rmobile (arm core)
R8A7740 of rmobile has ethernet device, and this is same IP of
sh-ether. This support R8A7740 of rmobile.

Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-09-24 13:55:42 -05:00
Marek Vasut
905b3b00a1 dm: net: Fixup the armada100 FEC driver
Apply the following questionable adjustment to silence GCC.

armada100_fec.c: In function ‘armdfec_send’:
armada100_fec.c:589:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2012-09-24 13:55:20 -05:00
Michal Simek
7fd7082024 net: emaclite: Support OF initialization
Support new CONFIG_OF_CONTROL option where device
probing is done based on device tree description.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-24 13:17:25 -05:00
Marek Vasut
61e129885a dm: net: Move IXP NPE to drivers/net/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2012-09-24 13:17:24 -05:00
Joe Hershberger
7f51898c1b net: Make netconsole src and dest ports configurable
It is desirable to use different port numbers for sending and receiving
packets with netconsole in the case where you have more than one device
on the local subnet with netconsole enabled for broadcast.  When they
use the same port for both, any output from one will look like input to
the other.  This is typlically not desirable.

This patch allows the input and output ports to be specified separately
in the environment.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-09-24 13:17:24 -05:00
Marek Vasut
fa2afe0274 dm: sparc: net: Fixup greth compile warnings
greth.c: In function ‘greth_recv’:
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat]
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat]
greth.c:541:6: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
greth.c: In function ‘greth_initialize’:
greth.c:623:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:655:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:684:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de
2012-09-18 12:01:50 -07:00
Wolfgang Denk
a6f0c4faa4 Merge branch 'master' of git://git.denx.de/u-boot-avr32
* 'master' of git://git.denx.de/u-boot-avr32:
  net:macb: add line break
  avr32:portmux: fix setup for macb1
  avr32: Remove redundant LDSCRIPT definition

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-04 09:17:27 +02:00
Andreas Bießmann
6ed0e94071 net:macb: add line break
Without this patch we see annoying output like this:

---8<---
U-Boot> dhcp
macb1: PHY not foundmacb0: PHY present at 1
macb0: Starting autonegotiation...
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-03 23:39:11 +02:00
Bo Shen
f7fa2f3740 arm : Atmel : add at91sam9x5ek board support
Add at91sam9x5ek board support, this board support the following SoCs
  AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35

Using at91sam9x5ek_nandflash to configure for the board
Now only supports NAND with software ECC boot up

Signed-off-by: Bo Shen <voice.shen@atmel.com>
[move MAINTAINERS entry to right place]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 14:58:14 +02:00
Cyril Chemparathy
2b62997ce9 cpsw: add driver for cpsw ethernet device
CPSW is an on-chip ethernet switch that is found on various SoCs from Texas
Instruments.  This patch adds a simple driver (based on the Linux driver) for
this hardware module.

This patch also adds support to clean and flush dcache during packet send
and receive.

Changes by Sandhya: Added support to clean and flush dcache during packet
		    send/receive and added timeouts.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana@ti.com>
[Ilya: Cleaned cache handling, some style cleanup, some small
fixes, use of internal RAM for descriptors]
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-09-01 14:58:10 +02:00
Scott Wood
3e978f5dc8 powerpc/fsl-corenet: remove dead variant symbols
These are not supported as individual build targets, but instead
are supported by another target.

The dead p4040 defines in particular had bitrotted significantly.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 12:16:54 -05:00
Timur Tabi
055ce08004 powerpc/85xx: remove support for the Freescale P3060
The P3060 was cancelled before it went into production, so there's no point
in supporting it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 12:16:53 -05:00
Timur Tabi
4376b4c00e fm-eth: use fdt_status_disabled() function in ft_fixup_port()
We have a dedicated function for setting the node status now, so use it.
Also improve a comment and fix the type of the phandle variable.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:19 -05:00
Timur Tabi
ae2291fbe0 fm-eth: add function fm_info_get_phy_address()
Function fm_info_get_phy_address() returns the PHY address for a given
Fman port.  This is handy when the MDIO code needs to fixup the Ethernet
nodes in the device tree to point to PHY nodes for a specific PHY address.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:18 -05:00
Timur Tabi
99abf7ded3 powerpc/85xx: add support for FM2 DTSEC5
Unlike previous SOCs, the Freescale P5040 has a fifth DTSEC on the second
Fman, so add the Fman and SerDes macros for that DTSEC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:18 -05:00
Wolfgang Denk
b98b611502 Merge branch 'next' of git://git.denx.de/u-boot
* 'next' of git://git.denx.de/u-boot:
  MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
  doc: cleanup - move board READMEs into respective board directories
  net: sh_eth: add support for SH7757's GETHER
  net: sh_eth: modify the definitions of regsiter
  net: sh_eth: add SH_ETH_TYPE_ condition
  net: sh_eth: clean up for the SH7757's code
  net: fec_mxc: Fix MDC for xMII
  net: fec_mxc: Fix setting of RCR for xMII
  net: nfs: make NFS_TIMEOUT configurable
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-30 20:39:52 +02:00
Yoshihiro Shimoda
631fea8f2d net: sh_eth: add support for SH7757's GETHER
SH7757 has 2 ETHERs and 2 GETHERs. This patch supports the SH7757's
GETHER. If CONFIG_SH_ETHER_USE_GETHER is defined using SH7757,
the driver handles the GETHER.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-07-23 22:00:58 -05:00
Yoshihiro Shimoda
49afb8cafc net: sh_eth: modify the definitions of regsiter
The previous code had many similar definitions in each CPU.

This patch borrows from the sh_eth driver of Linux kernel.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-07-23 22:00:54 -05:00
Yoshihiro Shimoda
262350932c net: sh_eth: add SH_ETH_TYPE_ condition
At the moment, the driver supports the following CPUs:
 - GETHER (Gigabit Ethernet) : SH7763, SH7734
 - ETHER  (Fast Ethernet)    : SH7724, SH7757

And the driver had the following "#if":

 #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
 #if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
 - Those are for GETHER

 #if defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7757)
 - This is for ETHER

So, for clean up the code, this patch adds SH_ETH_TYPE_GETHER and
SH_ETH_TYPE_ETHER. And then, the patch modifies the above "#if".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-07-23 22:00:50 -05:00
Yoshihiro Shimoda
58bef2a5e3 net: sh_eth: clean up for the SH7757's code
The SH7757's ETHER can work using the SH7724's setting. So, the patch
modifies it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-07-23 22:00:43 -05:00
benoit.thebaudeau@advans
f41471e6a3 net: fec_mxc: Fix MDC for xMII
The MDC signal is available on all xMII (i.e. 'not 7-wire') interfaces, so
mii_speed has to be set for all these interfaces, and not only for MII.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-07-19 11:46:19 -05:00
benoit.thebaudeau@advans
9d2d924a0a net: fec_mxc: Fix setting of RCR for xMII
At least on i.MX25, the RMII mode did not work, which is fixed by this patch.

The MII_MODE bit of the FEC RCR register means xMII, i.e. 'not 7-wire', so set
it accordingly.

According to the xMII and 7-wire (aka GPSI) standards, full duplex should be
available on xMII, but not on 7-wire, so set FCE accordingly. The FEC may
support full duplex for 7-wire too, but the reference manual does not say that,
so avoid an invalid assumption. Actually, the choice between half and full
duplex also depends on the endpoint/switch/repeater configuration, so a config
option could be added for that, but there has been no need for it so far.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-07-19 11:46:13 -05:00
Mike Frysinger
6705e036ce Blackfin: bfin_mac: drop volatile markings on packet buffers
Now that common code doesn't declare these as volatile, we don't need to
either anymore.  This fixes the build warning:

bfin_mac.c: In function 'bfin_EMAC_recv':
bfin_mac.c:193:23: warning: assignment discards qualifiers from pointer target type

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-19 00:09:32 -04:00
Wolfgang Denk
0878222fed Merge branch 'next' of git://git.denx.de/u-boot-net into next
* 'next' of git://git.denx.de/u-boot-net:
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-12 08:23:58 +02:00
Dinh Nguyen
66f119e50c net/designware: Consecutive writes to the same register to be avoided
This commit is an add-on to f6c4191f. There are a few registers where
consecutive writes to the same location should be avoided or have a delay.

According to Synopsys, here is a list of the registers and bit(s) where
consecutive writes should be avoided or a delay is required:

DMA Registers:
Register 0        Bit 7
Register 6        All bits except for 24, 16-13, 2-1.

GMAC Registers:
Registers 0-3     All bits
Registers 6-7     All bits
Register 10       All bits
Register 11       All bits except for 5-6.
Registers 16-47   All bits
Register 48       All bits except for 18-16, 14.
Register 448      Bit 4.
Register 459      Bits 0-3.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Matthew Gerlach <mgerlach@altera.com>
Acked-by: Amit Virdi <amit.virdi@st.com>
2012-07-11 13:15:31 -05:00
Troy Kisky
cc5f552283 net: phy: micrel: make ksz9021 phy accessible
Micrel accidentally used the same part number
for the KS8721 and KSZ9021. So, both cannot be
in the same build of u-boot. Add a config option
to handle this.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
2012-07-11 13:15:30 -05:00
Timur Tabi
11af8d6527 net: abort network initialization if the PHY driver fails
Now that phy_startup() can return an actual error code, check for that error
code and abort network initialization if the PHY fails.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part)
Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac)
Reviewed-by: Marek Vasut <marex@denx.de> (FEC part)
2012-07-11 13:15:30 -05:00
Timur Tabi
6e5b9ac097 phylib: phy_startup() should return an error code on failure
phy_startup() calls the PHY driver's startup function, but it ignores the
return code from that function, and so it never returns any failures.

Signed-off-by: Timur Tabi <timur@freescale.com>
2012-07-11 13:15:30 -05:00
Nobuhiro Iwamatsu
a6616efb23 net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other
When support sh7734 of sh-ether, ECSIPR_BRCRXIP and other were removed.
Therefore SH7757 and SH7724 can not build. This revise this probelem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2012-07-10 10:12:03 -05:00
Stefan Roese
ef76025a99 net: Multiple updates/enhancements to designware.c
This patch adds the following changes to designware ethernet driver
found on the ST SPEAr SoC:

- Don't init MAC & PHY upon startup. This causes a delay, waiting for
  the auto negotiation to complete. And we don't want this delay to
  always happen. Especially not on platforms where ethernet is not
  used at all (e.g. booting via flash).
  Instead postpone the MAC / PHY configuration to the stage, where
  ethernet is first used.
- Add possibility for board specific PHY init code. This is needed
  for example on the X600 board, where the Vitesse PHY needs to be
  configured for GMII mode.
  This board specific PHY init is done via the function
  designware_board_phy_init(). And this driver now adds a weak default
  which can be overridden by board code.
- Use common functions miiphy_speed() & miiphy_duplex() to read
  link status from PHY.
- Print status and progress of auto negotiation.
- Print link status (speed, dupex) upon first usage.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2012-07-07 14:07:42 +02:00
Vipin Kumar
9afc1af01f SPEAr: Add interface information in initialization
Few Designware peripheral registers need to be modified based on the
ethernet interface selected by the board. This patch supports interface
information in ethernet driver

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:40 +02:00
Rajashekhara, Sudhakar
b78375a806 da850/omap-l138: Enable auto negotiation in RMII mode
On DA850/OMAP-L138 it was observed that in RMII mode,
auto negotiation was not performed. This patch enables
auto negotiation in RMII mode. Without this patch, EMAC
initialization takes more time and sometimes tftp fails
in RMII mode.

Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
2012-07-07 14:07:35 +02:00
Nobuhiro Iwamatsu
4398d55991 net: sh-eth: Add support Gigabit of SH7734
SH7734 support GMII. This add register infomation and the function
which enable GMII.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-05-23 17:53:09 -05:00
Nobuhiro Iwamatsu
ee6ec5d4dd net: sh_eth: Add support SH7734 Ethernet device
SH7734 has one channel ethernet device.
This support 10/100/1000Base, and RMII/MII/GMII.
And this has the same structure as SH7763.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-05-23 17:53:09 -05:00
Joe Hershberger
4ef8d53caa net: Allow filtering on debug traces in the net subsystem
Add several levels of DEBUG prints so that you can limit the noise to
the severety of your problem.

DEBUG_LL_STATE = Link local state machine changes
DEBUG_DEV_PKT = Packets or info directed to the device
DEBUG_NET_PKT = Packets on info on the network at large
DEBUG_INT_STATE = Internal network state changes

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00