Commit graph

14 commits

Author SHA1 Message Date
Masahiro Yamada
e91df49fbb kbuild, blackfin: Add CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
Many (but not all) of Blackfin boards give -O2 option
to compile under lib/ directory.
That means lib/ should be speed-optimized,
whereas other parts should be size-optimized.

We want to keep the same behavior,
but do not want to parse board/*/config.mk again and again.
We've got no choice but to invent a new method.

CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED, if it is enabled,
gives -O2 flag only for building under lib/ directory.

Dirty codes which I had marked as "FIX ME"
in board/${BOARD}/config.mk have been deleted.
Instead, CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED has been
defined in include/configs/${BOARD}.h.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
2014-03-07 10:59:06 -05:00
Mike Frysinger
31a4f1e5b6 board configs: drop NET_MULTI references
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Mike Frysinger
fbcf8e8c75 Blackfin: move CONFIG_BFIN_CPU back to board config.h
This is a revert of 821ad16fa9 as Wolfgang doesn't like the new code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
821ad16fa9 Blackfin: move CONFIG_BFIN_CPU to board config.mk
The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk.  It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
787e343b91 Blackfin: unify default I2C settings for ADI boards
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Heiko Schocher <hs@denx.de>
2010-07-13 17:50:52 -04:00
Mike Frysinger
0c929426f8 Blackfin: bf518f-ezbrd: handle different PHYs dynamically
The original BF518F-EZBRD's have a Micrel KSZ8893 DSA on them, but newer
ones only have a National PHY (which lack a RX Error interrupt line).  So
in the board eth init code, dynamically detect what is hooked up to the MAC
and handle each accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13 17:50:50 -04:00
Mike Frysinger
912da8d606 Blackfin: bf518f-ezbrd: increase monitor length
The addition of KGDB overflowed the current linker section.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Cliff Cai
e54c820991 Blackfin: convert bfin_sdh to generic mmc
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Mike Frysinger
76d82187c6 Blackfin: tweak embedded LDR env config option
Use the common config option for extracting the environment for embedding
into LDR files and clarify the LDR-specific option.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Mike Frysinger
afac8b0717 Blackfin: fix SPI flash speed define name
The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not
CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:21 -04:00
Mike Frysinger
f52efcae98 Blackfin: bf518f-ezbrd: enable SST SPI flash driver
The BF51xF parts have an internal SST SPI flash, so make sure the driver is
enabled by default so we can access it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Mike Frysinger
f348ab85f7 Blackfin: convert specific pre/post config headers to common method
The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
common Blackfin board defines.  The common method now is to use config.h,
so convert blackfin-config-post.h to that.  Rename the still Blackfin
specific blackfin-config-pre.h to config-pre.h so the naming conventions
at least line up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Graf Yang
ab68790798 Blackfin: bf518f-ezbrd: setup portmux for async flash
The pins for async memory where parallel flash lives are not enabled by
default, so make sure we mux them as needed.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-25 22:38:42 -04:00
Mike Frysinger
84a9dda324 Blackfin: bf518f-ezbrd: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:46 -04:00