Commit graph

12 commits

Author SHA1 Message Date
Peng Fan
1c1f6076b9 Add missing part of: "power: pmic: pfuze100 support driver model"
This part of mentioned commit, was missed by my mistake during the rebase.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>

Original commit message:
power: pmic: pfuze100 support driver model

1. Support driver model for pfuze100.
2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100
3. This driver intends to support PF100, PF200 and PF3000, so add
   the device id into the udevice_id array.
4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS.

Change-Id: I4fc88414f3c0285f9648e47ec7aed60addeccc4d
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-14 16:53:02 +02:00
Peng Fan
8fa46350a4 power: regulator: add pfuze100 support
1. Add new regulator driver pfuze100.
   * Introduce struct pfuze100_regulator_desc for maintaining info
     for one regulator.
2. Add new Kconfig entry DM_REGULATOR_PFUZE100 for pfuze100.
3. This driver intends to support PF100, PF200 and PF3000.
4. Add related macro definition in pfuze header file.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
2015-08-12 11:04:58 +02:00
Peng Fan
430abe1cd7 power: pfuze100 correct SWBST macro definition
According to datasheet, SWBST_MODE starts from bit 2 and it occupies 2 bits.
So SWBST_MODE_MASK should be 0xC, and SWBST_MODE_xx should be ([mode] << 2).

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-12 10:02:26 +02:00
Peng Fan
3fd10f3e25 pmic: pfuze100 fix typo
Change PUZE_100_SW1ABCONF to PFUZE100_SW1ABCONF

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-05-19 15:13:38 +02:00
Tim Harvey
76962d0f8e power: pfuze100: fix LDO_EN bit value
The LDO_EN is bit 4, not value 4. This is only used on the Ventana boards so
we will change it in the header as the other values there are in terms of
values and not bit numbers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:41:08 +02:00
Stefano Babic
a4f7d09831 pmic: fix missing SWITCH_SIZE
Applying ccbb18713b,
the define disappeared. Fix it.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-02-11 12:35:46 +01:00
Peng Fan
ccbb18713b pmic:pfuz100 add switch mode and more registers
Add more pfuze register offset.
And switch mode definition.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:49 +01:00
Peng Fan
ee52f1a5fe pmic:pfuze add macro for setting voltage
"#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)"
This macro is for configuring SW1A/B/C Output Voltage easily.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:48 +01:00
Ye.Li
36523e9b0a power: pfuze100: Update definitions for buck regulators
Add definitions for buck regulators (SW1A/B/C) registers and voltage
values.

Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
2014-11-20 10:50:20 +01:00
Fabio Estevam
66ca09fc41 mx6sabred: Add PFUZE100 PMIC support
mx6sabresd boards have a PFUZE100 PMIC connected to I2C2 bus.

Add support for it

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-05-28 17:35:39 +02:00
Tim Harvey
93a6d92cfa power: make pfuze100 be able to coexist with other pmics
Avoid uding pmic_init() as this forces the model of only allowing a
single PMIC driver to be built at a time.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 14:38:23 +02:00
Tim Harvey
91baa6f7ff power: add PFUZE100 PMIC driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-03-05 12:02:31 +01:00