Commit graph

6 commits

Author SHA1 Message Date
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Ben Gardiner
11080ab66d ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC
There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board
configs as part of the arm relocation series; but these are not needed now as we
do not #undef what is not #defined in the first place.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Heiko Schocher <hs@denx.de>
2010-10-13 09:57:47 +02:00
Heiko Schocher
a784c01adc ARM: relocation: fix typo in comment
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-10-13 09:50:55 +02:00
Heiko Schocher
ab86f72c35 ARM: implement relocation for ARM926
Change the implementation for arm926 to relocate the code to
an arbitrary address in RAM.

Adapt the TX25 (i.MX25), magnesium board to test the changes.

On the tx25 board TEXT_BASE is set to the final relocation
address to prevent one more copying of u-boot code
when relocating. More info see:
doc/README.arm-relocation

da850 board:
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>

Portions of this work were supported by funding from
the CE Linux Forum.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
2010-09-19 19:29:54 +02:00
Heiko Schocher
c3330e9d6a ARM (ARM926ejs): add data cache support, tested on magnesium and tx25 board
Enable "cache" command on tx25 and magnesium board and test performance.

    Test 1: Loading 127 MB of data from NAND flash into RAM:

    Instr. Cache        off     on      on
      Data Cache        off     off     on
    --------------------------------------------------
    magnesium           32,6s   22,5s   30s     = x 1,09
    tx25 (29MB only)    9,69s   5,05s   8,16s   = x 1,19

    Test 2: uncompressing a gzipped image from RAM to RAM
            (size compressed: 6.5 MiB, uncompressed: 35 MiB):

    Instr. Cache        off     on      on
      Data Cache        off     off     on
    --------------------------------------------------
    magnesium           4,25s   2,08s   1,72s   = x 2,47
    tx25                4,82s   2,04s   1,84s   = x 2,62

Portions of this work were supported by funding from
the CE Linux Forum.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Alessandro Rubini <rubini@gnudd.com>
2010-09-19 19:29:51 +02:00
Heiko Schocher
bbe310922f arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-04-30 05:23:23 -05:00