Commit graph

904 commits

Author SHA1 Message Date
Jason Jin
87c9b18687 ColdFire: Fix the build error for Freescale m5282evb board.
Clean up the lds file and fix the environment build error.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-19 23:52:09 +08:00
Fabio Estevam
fe5ebe97fa mx6qsabreauto: Add Ethernet support
mx6qsabreauto has a AR8031 Gigabit PHY.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
9e0081d573 mx31: Fix PDR0_CSI_PODF
The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0
register is actually composed of two bit-fields: one pre-divider and one
post-divider. This patch fixes the CCM access macros and the code using them
accordingly.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
833b6435de mx5/6: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX5/6 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Liu <r64343@freescale.com>
Cc: Matt Sealey <matt@genesi-usa.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:10 -07:00
Fabio Estevam
7dd6545da7 mx6q: Add basic support for mx6qsabreauto
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:09 -07:00
Fabio Estevam
e72d617860 mx6qsabresd: Add 8-bit USDHC support
USDHC3 has 8 pins wired in mx6qsabresd. Configure the extra pins.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
a0d21fc01a mx6qsabresd: Add Ethernet support
mx6qsabresd has a AR8031 Gigabit PHY.

Add support for it.

Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail.

Tested on 1Gbp and 100Mbps networks.

Suggested-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
7891e258d4 mx6: Add basic support for mx6qsabresd board.
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
af7ec0b058 mx6q: Factor out common DDR3 init code
Factor out common DDR3 initialization code, allowing easier maintainance of such
scripts.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Albert ARIBAUD
1c27059a2f Merge remote-tracking branch 'u-boot/master' 2012-09-30 23:49:17 +02:00
Tom Rini
5675b50916 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2012-09-25 12:23:55 -07:00
Fabio Estevam
5436eaeab9 mx28evk: Remove fecmxc_mii_postcall()
fecmxc_mii_postcall() is specific to the KSZ9021 PHY on m28evk and
should not be used on mx28evk, which has LAN8270 instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-09-24 10:45:41 +02:00
Benoît Thébaudeau
362635bd50 mx51evk: Add CONFIG_REVISION_TAG
FSL 2.6.35 kernel assumes that the bootloader passes the CONFIG_REVISION_TAG
information.

If this data is not present, the kernel misconfigures the TZIC, which results in
the timer interrupt handler never being called, so the kernel deadlocks while
calibrating its delay.

Suggested-by: Greg Topmiller <Greg.Topmiller@jdsu.com>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-23 19:55:06 +02:00
Tom Rini
495dbd72dd Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-09-21 14:53:13 -07:00
Alison Wang
198cafbf2c ColdFire: Clean up checkpatch warnings for MCF54451 and MCF54455
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:27 +08:00
Alison Wang
a4110eecf2 ColdFire: Clean up checkpatch warnings for MCF547x and MCF548x
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:27 +08:00
Alison Wang
c6d8863015 ColdFire: Clean up checkpatch warnings for MCF523x
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:27 +08:00
Alison Wang
aa0d99fc28 ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:27 +08:00
Alison Wang
32dbaafa5a ColdFire: Clean up checkpatch warnings for MCF52x2
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:26 +08:00
Alison Wang
849fc42471 ColdFire: Clean up checkpatch warnings for MCF5227x
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20 20:39:26 +08:00
Ira W. Snyder
db1fc7d28e mpc8308rdb: add support for eSDHC MMC controller
Add support for the onboard eSDHC MMC controller. The hardware on the
MPC8308RDB has the following errata:

- ESDHC111: manual asynchronous CMD12 is broken
- DMA is broken (PIO works)

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>

[added include fsl_esdhc header to prevent implicit declarations of
fsl_esdhc_mmc_init() and fdt_fixup_esdhc()]

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-09-18 16:16:45 -05:00
Ira W. Snyder
ea1ea54e35 mpc8308rdb: add support for Spansion SPI flash on header J8
The SPI pins are routed to header J8 for testing SPI functionality. A
Spansion flash has been wired up and tested on this header.

This patch breaks support for the second TSEC interface, since the GPIO
pin used as a chip select is pinmuxed with some of the TSEC pins.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-09-18 16:16:44 -05:00
Fabio Estevam
1d9b033269 mx35pdk: README: Remove NAND references
Booting from NAND is currently not supported, so remove its references.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-17 13:17:17 +02:00
Stefano Babic
3292539e7d MX35: mx35pdk: add support for MMC
Add support for SD card and change the default
environment due to increased u-boot size.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-09-10 14:32:47 +02:00
Ashok Kumar Reddy
5d20881eec mx6qsabrelite:Use IMX_GPIO_NR Macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
2012-09-10 14:25:38 +02:00
Fabio Estevam
ddfcc810d3 mx28evk: Convert to mxs_adjust_memory_params()
Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params
missed to update mx28evk, which caused the board not to boot.

Apply the conversion so that the board can boot again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-09-04 11:57:56 +02:00
Otavio Salvador
4f434e3d6d MX28: mx28evk: Align SSP clock speed
Align the SSP clock speed with oscilator to achieve higher transfer
stability.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Marek Vasut <marex@denx.de>
2012-09-04 11:57:56 +02:00
Benoît Thébaudeau
16e43f354d fsl_esdhc: Remove cache snooping for i.MX
The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so
disable it globally for this architecture. This avoids setting no_snoop for all
i.MX boards, and it prevents setting a reserved bit of a reserved register if
fsl_esdhc_mmc_init() is used on i.MX, like in
arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init().

Since no_snoop was only used on i.MX, get rid of it BTW.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
2012-09-01 14:58:30 +02:00
Ashok Kumar Reddy
925507088b mx5:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
2012-09-01 14:58:30 +02:00
Ashok Kumar Reddy
acbdea2ece mx6qarm2:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:29 +02:00
Otavio Salvador
72f8ebf17e mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
The DRAM initialization, after SPL has complete, is exactly the same
for all mxs SoCs so we should name it accordinly.

The following boards has been changed:

 * apx4devkit
 * m28evk
 * mx28evk
 * sc_sps_1

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
2012-09-01 14:58:28 +02:00
Fabio Estevam
5c8d14dfd9 mx53ard: Use IMX_GPIO_NR macro
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:28 +02:00
Fabio Estevam
5179a26848 mx51evk: Use IMX_GPIO_NR macro
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:28 +02:00
Fabio Estevam
3ef0a312c0 mx53loco: Use IMX_GPIO_NR macro
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:28 +02:00
Stefano Babic
5fecb36ca0 MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>
2012-09-01 14:58:27 +02:00
Troy Kisky
0aff384b14 mx53evk: add boot_mode support
This allows a watchdog reset to start the ROM's
usb/serial downloader, or boot from an sdcard.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-09-01 14:58:26 +02:00
Troy Kisky
bb05b40b06 mx6qsabrelite: add boot_mode support
This allows a watchdog reset to start the ROM's
usb downloader, or boot from an sdcard.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-09-01 14:58:26 +02:00
Troy Kisky
d1c679a46d iomux: move IOMUX_GPR13_xxx defines
Move mx6 specific defines to arch-mx6 directory.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00
Benoît Thébaudeau
34a31bf52b mx35: Fix typo on EDIO
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00
Marek Vasut
7fb1ed0eab MX28: Move the u-boot.bd info CPUDIR/SOCDIR
This gets us rid of duplication of the same file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:18 +02:00
Fabio Estevam
1e080988d0 mx51evk: do not overwrite the console
On this board, the console is always set to the serial line.
Do not allow to overwrite it when video is enabled.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:18 +02:00
Stefano Babic
3e0773708d MX5: mx53loco: do not overwrite the console
On this board, the console is always set to the serial line.
Do not allow to overwrite it when video is enabled.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:18 +02:00
Otavio Salvador
1e0cf5c34b mxs: Reowork SPL to use 'mxs' prefix for methods
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Otavio Salvador
9c471142bc mxs: prefix register structs with 'mxs' prefix
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Scott Wood
d69dba367a powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
LAW init is skipped in the SPL payload because it's assumed that the SPL
has taken care of it -- so make sure the SPL loads all the LAWs as is
done on other boards.

This bug was introduced by:

  commit 4589728e21
  Author: Kumar Gala <galak@kernel.crashing.org>
  Date:   Fri Nov 11 08:14:53 2011 -0600

    powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND

    Size grew a bit so nand-spl didn't fit in 4k, reduce done by removing
    LAW entries not needed during SPL phase.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-08-23 12:49:48 -05:00
Timur Tabi
055ce08004 powerpc/85xx: remove support for the Freescale P3060
The P3060 was cancelled before it went into production, so there's no point
in supporting it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 12:16:53 -05:00
Timur Tabi
61fc52b660 powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver
enum board_slots contained six values, where SLOT1 == 1, SLOT2 == 2, and
so on.  This is pointless, so remove it.  Also move the lane_to_slot[]
array to the top of the file so that it can be used by other functions.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:19 -05:00
Timur Tabi
45b092d301 powerpc/85xx: introduce function serdes_device_from_fm_port()
In order to figure out which SerDes lane a given Fman port is connected
to, we need a function that maps the fm_port namespace to the srds_prtcl
namespace.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:18 -05:00
Paul Gortmaker
a2af6a7a84 mpc85xx: use LCRR_DBYP define instead of raw constant
Using the raw value of 0x80000000 directly in the code can
lead to "count the zeros" bugs like that fixed in commit
718e9d13b98 ("MPC85xxCDS: Fix missing LCRR_DBYP bits for
66-133MHz LBC")

Change all existing raw values to use the symbolic value of
LCRR_DBYP instead.

Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:18 -05:00
Matthew McClintock
c8f9802a72 p1010rdb: fix ddr values for p1014rdb (setting bus width to 16bit)
There was an extra 0 in front of the value we were using to mask,
remove it to improve the code.

Also fix the value written to ddr_sdram_cfg to set the bus width
properly to 16 bits

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:16 -05:00