Commit graph

14 commits

Author SHA1 Message Date
Wolfgang Denk
32bf3d143a Fix quoting problem (preboot setting) in many board config files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-03 12:37:53 +01:00
Martin Krause
e318d9e902 TQM8xx: use the CFI flash driver on all TQM8xx boards
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27 02:00:10 +01:00
Jens Gehrlein
dabad4b9bc TQM860M: Support for 10col SDRAMs, max. 128 MiB
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27 01:59:17 +01:00
Martin Krause
da3aad55cb TQM860M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-10-15 09:47:22 +02:00
Wolfgang Denk
67c31036ac TQM8xx[LM]: Fix broken environment alignment.
With recent toolchains, the environment sectors were no longer aligned to
sector boundaries. The reason was a combination of two bugs:

1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
   for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
   this gets defined, is not included here (and cannot be included
   without causing lots of problems).

   Added a new #define CFG_USE_PPCENV for all boards which really
   want to put the environment is a ".ppcenv" section.

2) The linker scripts just include environment.o, silently assuming
   that the objects in that file are really in the order in which
   they are coded in the C file, i. e. "environment" first, then
   "redundand_environment", and "env_size" last. However, current
   toolchains (GCC-4.x) reorder the objects, causing the environment
   data not to start on a flash sector boundary:

   Instead of:					we got:

	40008000 T environment			40008000 T env_size
	4000c000 T redundand_environment	40008004 T redundand_environment
	40010000 T env_size			4000c004 T environment

   Note: this patch fixes just the first part, and cures the alignment
   problem by making sure that "env_size" gets placed correctly. However,
   we still have a potential issue because primary and redundant
   environment sectors are actually swapped, i. e. we have now:

	40008000 T redundand_environment
	4000c000 T environment
	40010000 T env_size

   This shall be fixed in the next version.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-16 17:20:37 +02:00
Wolfgang Denk
eb6da80507 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-16 02:39:35 +02:00
Jon Loeliger
37d4bb7058 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 21:38:02 -05:00
Jon Loeliger
2694690e28 include/configs: Use new CONFIG_CMD_* in TQM board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 11:04:15 +02:00
Wolfgang Denk
2751a95abd Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
wdenk
414eec35e3 Fix problems with SNTP support;
enable SNTP support in some boards.
2005-04-02 22:37:54 +00:00
wdenk
e9132ea94c Clean up the TQM8xx_YYMHz configurations; allow to use the same
binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.
2004-04-24 23:23:30 +00:00
wdenk
ae3af05ec9 Update for TQM board defaults:
disable clocks_in_mhz, enable boot count limit
2003-08-07 22:18:11 +00:00
wdenk
f12e568ca4 * Add support for NSCU board
* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules

* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
  mirror bit flash on TQM8xxM modules
2003-07-07 20:07:54 +00:00