Commit graph

12 commits

Author SHA1 Message Date
Haavard Skinnemoen
a08458303e atmel_mci: Fix data timeout value
Calculate the data timeout based on values from the CSD instead of
just using a hardcoded DTOR value. This is a backport of a similar fix
in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
instead of down.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-13 17:35:16 +02:00
Haavard Skinnemoen
0ba8eed28b AVR32: Include <div64.h> instead of <asm/div64.h>
include/asm-avr32/div64.h was recently moved to include/div64.h, but
cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
the patch was merged perhaps?)

This patch updates cpu/at32ap/interrupts.c so that the avr32 port
compiles again.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-13 17:22:31 +02:00
Haavard Skinnemoen
f0d1246ed7 atmel_mci: Use 512 byte blocksize if possible
Instead of always using the largest blocksize the card supports, check
if it can support smaller block sizes and use 512 bytes if possible.
Most cards do support this, and other parts of u-boot seem to have
trouble with block sizes different from 512 bytes.

Also enable underrun/overrun protection.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
2007-08-13 16:33:52 +02:00
Wolfgang Denk
b99c1e6d8e Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup. 2007-04-18 16:53:52 +02:00
Haavard Skinnemoen
fc26c97bb6 Atmel MCI driver
Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.

The AT91 ARM-based CPUs use basically the same hardware, so it should
be possible to share this driver, but no effort has been made so far.

Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
05fdab1ef6 AVR32: Add clk and gpio infrastructure for mmci
Implement functions for configuring the mmci pins, as well as
functions for getting the clock rate of the mmci controller.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
b4ec9c2d43 AVR32: Add clk and gpio infrastructure for macb0 and macb1
Implement functions for configuring the macb0 and macb1 pins, as
well as functions for getting the clock rate of the various
busses the macb ethernet controllers are connected to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
1f4f2121c2 AVR32: Relocate u-boot to SDRAM
Relocate the u-boot image into SDRAM like everyone else does. This
means that we can handle much larger .data and .bss than we used to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
df548d3c3e AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.

As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
c841beedde AVR32: Split start_u_boot into board_init_f and board_init_r
Split the avr32 initialization code into a function to run before
relocation, board_init_f and a function to run after relocation,
board_init_r. For now, board_init_f simply calls board_init_r
at the end.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:20 +02:00
Wolfgang Denk
d38936cdae Fix "ar" flags in some Makefiles to allow for silent "make -s" 2006-10-27 11:55:21 +02:00
Wolfgang Denk
72a087e047 Add AT32AP CPU and AT32AP7000 SoC support
Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.

The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 14:27:35 +02:00