sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
2,177 Commits 9 Branches 8 Tags 113 MiB
Commit Graph

1028 Commits

Author SHA1 Message Date
Wolfgang Denk b87dfd2854 Add support for TB5200 board 
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006

Some code cleanup
 2006-07-19 13:50:38 +02:00
Jon Loeliger 0f2859689a Merge branch 'mpc86xx' 2006-07-13 10:58:28 -05:00
Haiying Wang bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM. 
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
 2006-07-13 10:57:37 -05:00
Markus Klotzbuecher 090eb73510 Add support for TQM885D board. 
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
 2006-07-12 15:26:01 +02:00
Markus Klotzbuecher b02d0177c1 Support for spc1920 board. 
Patch by Markus Klotzbuecher, 12 Jul 2006
 2006-07-12 08:48:24 +02:00
Wolfgang Denk 985b950a9b Fix error in flash protection calculation on MCC200 board. 2006-07-10 23:22:43 +02:00
Wolfgang Denk 9d40799551 Major PCMCIA Cleanup to make code better readable and maintainable. 
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
  placed to the drivers/rpx_pmcia.c file to avoid duplication.
  Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
  board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
  the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
 2006-07-10 23:07:28 +02:00
Wolfgang Denk 0095b787fe Merge with /home/m8/git/u-boot 2006-07-05 10:03:52 +02:00
Marian Balakowicz d19206b9a5 Fix AMCC bamboo eval board compilation errors. 2006-07-04 01:27:46 +02:00
Marian Balakowicz fe84b48a94 Cleanup config file and bootup output for Yucca board. 2006-07-03 23:42:36 +02:00
Wolfgang Denk 3b5f61a025 Merge with /home/m8/git/u-boot 2006-06-30 19:32:25 +02:00
Marian Balakowicz f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz 6c5879f380 Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 16:30:46 +02:00
Wolfgang Denk a63c31cff5 Cleanup trab board for GCC-4.x 2006-06-26 10:54:52 +02:00
Jon Loeliger 321bbd41f9 Merge branch 'mpc86xx' 2006-06-22 08:53:47 -05:00
Jon Loeliger 684623ce92 Fix bug in 8641hpcn reset command with no args. 
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
 2006-06-22 08:51:46 -05:00
Zhang Wei 8be429a5dd Reworked IRQ mapping in OF-tree. 2006-06-22 08:31:21 -05:00
Wolfgang Denk f73e73ba0e Merge with /home/hs/U-Boot/u-boot-dev 2006-06-20 00:12:59 +02:00
Heiko Schocher f5e0d03970 Add support for wrPPMC7xx/74xx boards 
Patch from Richard Danter, 12 Aug 2005
 2006-06-19 11:02:41 +02:00
Wolfgang Denk 8d352247ec Merge with ssh://atlas/home/wd/git/u-boot/work 2006-06-19 01:46:08 +02:00
Wolfgang Denk 0c32d96ddd Add support for gth2 board 
Patch by Thomas Lange, Aug 11 2005
 2006-06-16 17:32:31 +02:00
Wolfgang Denk 10af6d53bc Fix DDR6 errata on TQM834x boards 
Patch by Thomas Waehner, 07 Mar 2006
 2006-06-16 16:53:06 +02:00
Wolfgang Denk 14d9ab351c Remove obsolete flash driver board/tqm5200/flash.c 
Patch by Martin Krause, 11 Jan 2006
 2006-06-16 16:50:42 +02:00
Wolfgang Denk bc8bb6d458 Add support for PS/2 keyboard on TQM85xx board 
Patch by Martin Krause, 07 Nov 2005

Tested on a STK85XX baseboard. Make sure the PS/2 controller
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
 2006-06-16 16:40:54 +02:00
Wolfgang Denk cebd1fcec0 Fix TRAB channel switching delay for trab_fkt.bin standalone applikation 
Patch by Martin Krause, 08 Nov 2005

In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
 2006-06-16 16:14:28 +02:00
Wolfgang Denk cd65a3dc87 Adjust TQM5200 make targets 
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
 2006-06-16 16:11:34 +02:00
Wolfgang Denk 4bdb53cafb Fix setting of environment variable "ver" on trab board 
The environment variable "ver" is now set before
do_auto_update() is called, so that "ver" can be used
in USB update scripts.
Patch by Martin Krause, 27 Oct 2005
 2006-06-16 15:56:12 +02:00
Wolfgang Denk b9fff8ee83 Fix wrong usage of udelay() in led_blink() on trab board 
Patch by Martin Krause, 27 Oct 2005
 2006-06-16 15:52:58 +02:00
Wolfgang Denk 3e9a299231 Fix udelay bug in vfd.c for trab board 
Patch by Martin Krause, 27 Oct 2005
 2006-06-16 15:47:05 +02:00
Wolfgang Denk 9e18a4bc6c Fix memory init problems on MCC200 board 2006-06-14 16:48:18 +02:00
Wolfgang Denk b1d71358a9 Minor code cleanup. 2006-06-10 22:00:40 +02:00
Wolfgang Denk 4176c79964 Merge with /home/hs/U-Boot/u-boot-dev 2006-06-10 19:27:47 +02:00
Wolfgang Denk 9d4d3e3833 Merge with http://www.psyent.com/git/uboot (NIOS2 - Scott McNutt) 2006-06-10 01:36:27 +02:00
Wolfgang Denk 5d7022b041 Fix U-Boot enviroenment sector protection on MCC200 board 2006-06-09 21:19:21 +02:00
Scott McNutt 9cc8337832 Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards 
Patch by Scott McNutt, 08 Jun 2006
 2006-06-08 13:37:39 -04:00
Scott McNutt 3d22d0b89b Update PK1C20 board 
-Update base addresses for standard configuration
  -Eliminate use of CACHE_BYPASS in board code
  Patch by Scott McNutt, 08 Jun 2006
 2006-06-08 12:03:21 -04:00
Jon Loeliger 8bb683b627 Merge branch 'mpc86xx' 2006-06-07 10:54:16 -05:00
Jon Loeliger d9bf4858fc Allow DTC path to be passed in. 
Signed-off-by: Jon Loeliger <jdl@jdl.com>
 2006-06-07 10:52:49 -05:00
Jon Loeliger a941b83241 Merge branch 'mpc86xx' 2006-06-07 08:49:46 -05:00
Jon Loeliger 72ed528a94 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-06-07 08:49:38 -05:00
Haiying Wang c83ae9ea6d Modify the IRQ of DUART2 2006-06-07 08:48:08 -05:00
Stefan Roese 4526c87eec Update PCS440EP port to fit into one flash device (incl. environment) 
Patch by Stefan Roese, 06 Jun 2006
 2006-06-06 10:59:12 +02:00
Wolfgang Denk 2fd9eb509d Minor cleanup 2006-06-02 17:04:21 +02:00
Stefan Roese a4c8d1389f Add support for PCS440EP board 
Patch by Stefan Roese, 02 Jun 2006
 2006-06-02 16:20:36 +02:00
Jon Loeliger c934f655f9 Review cleanups. 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
 2006-05-31 14:01:32 -05:00
Jon Loeliger cb5965fb95 White space cleanup. 
Some 80-column cleanups.
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
 2006-05-31 12:44:44 -05:00
Jon Loeliger 3d5c5be547 Removed unneeded local_bus_init() from 8641HPCN board. 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
 2006-05-31 11:39:34 -05:00
Jon Loeliger 4d3d729c16 Moved mpc8641hpcn_board_reset() out of cpu/ into board/. 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
 2006-05-31 11:24:28 -05:00
Jon Loeliger 126aa70f10 Move mpc86xx PIXIS code to board directory 
First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
 2006-05-31 09:49:33 -05:00
Wolfgang Denk b9b2480f4f Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone 
Patch by Stefan Roese, 29 May 2006
 2006-05-30 17:45:30 +02:00
Wolfgang Denk ba94a1bba3 * Update Intel IXP4xx support 
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]
 2006-05-30 15:56:48 +02:00
Haiying Wang ed45d6c930 Added pci@8000 block. 
Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.

Signed-off-by: Jon Loeliger <jdl@jdl.com>
 2006-05-26 10:13:04 -05:00
Jon Loeliger 586d1d5abd Update 86xx address map and LAWBARs. 2006-05-19 13:54:02 -05:00
Jon Loeliger f35ec68fb0 Enable 2nd CPU and I2C. 2006-05-19 13:54:02 -05:00
Jon Loeliger 9f37dc8cab Merge branch 'mpc86xx' 2006-05-15 08:32:11 -05:00
Jon Loeliger bf690dcb51 Update interrupt mapping. 2006-05-15 07:26:56 -05:00
Wolfgang Denk 8cba090c58 Add support for VirtLab2 board 
(needed because of differences in the PCMCIA hardware).
 2006-05-12 16:15:46 +02:00
Wolfgang Denk 977b50f868 Minor cleanup. 2006-05-10 17:43:20 +02:00
Jon Loeliger 846c2d4a0e Merge branch 'mpc86xx' 2006-05-10 09:43:21 -05:00
Haiying Wang 6cfea33477 Remove unneeded INIT_RAM_LOCK cache twiddling. 
Correctly tracks r29 as global data pointer now.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
 2006-05-10 09:38:06 -05:00
Jon Loeliger d4dd317b58 Remove unnecessary flash.c file. 2006-05-10 09:33:07 -05:00
Stefan Roese d1dd22f92e OMAP 5912/OSK: update EMIFS CS1 timings: 
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings.  The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
 2006-05-10 11:49:37 +02:00
Stefan Roese 77f633425b Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports 
Patch by Hiroki Kaminaga, 11 Mar 2006
 2006-05-10 11:28:48 +02:00
Stefan Roese 6080a0eb63 Update omap5912osk board support 
- Fix OMAP support that omap5912osk compiles in current source tree
  - Update with code from "http://omap.spectrumdigital.com/osk5912"
    to fix problems with DDR initialization
  - Fix timer setup
  - Use CFI flash driver and support complete 32MB of onboard flash
  - Add "print_cpuinfo()" and "checkboard()" functions to display
    CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
 2006-05-10 10:55:16 +02:00
Jon Loeliger a67255363a Merge branch 'mpc86xx' 2006-05-09 08:33:11 -05:00
Jon Loeliger 18b6c8cd8a Get MPC8641HPCN flash images working. 
Enable the CFI driver.
    Remove bogus LAWBAR7 cruft.
    Use correct TEXT_BASE, Fixup load script.
    Enable SPD EEPROM during DDR setup.
    Use generic RFC 1918 IP addresses by default.
 2006-05-09 08:23:49 -05:00
Wolfgang Denk 1cfefe8cb6 Merge with /home/m8/git/u-boot 2006-05-09 13:46:55 +02:00
Marian Balakowicz 78b123cd69 Add M5271EVB board support. 2006-05-09 11:54:44 +02:00
Marian Balakowicz 483a0cf804 Fixes for gcc 3.4 based m68k toolchain, 
based on patch by Jate Sujjavanich.
 2006-05-09 11:28:36 +02:00
Wolfgang Denk 0cf7d8aa0b Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds 2006-05-03 17:52:20 +02:00
Heiko Schocher cb0fdf3cfa VoiceBlue update: use new MTD flash partitioning methods, use more 
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
 2006-05-03 08:34:03 +02:00
Wolfgang Denk 610cf3676e Coding Style cleanup 2006-05-03 01:24:04 +02:00
Marian Balakowicz 7a635e004e Add support for Freescale M5271: Merge with /work/u-boot.mcf5271 2006-04-27 19:12:19 +02:00
Jon Loeliger 5c9efb36a6 Cleanup whitespaces and style issues. 
Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.
 2006-04-27 10:15:16 -05:00
Jon Loeliger debb7354d1 Initial support for MPC8641 HPCN board. 2006-04-26 17:58:56 -05:00
Heiko Schocher 0e0ef590b2 Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 
Patch from Scott McNutt, 11 Aug 2005
 2006-04-26 08:13:18 +02:00
Markus Klotzbuecher 7c93b2443c NAND support for zylonite board + some minor cleanup. 2006-04-25 16:48:48 +02:00
Markus Klotzbuecher 71ae411a63 delta board: support for magic key detection and handling. 2006-04-25 10:03:01 +02:00
dzu@denx.de 6ca24c64a5 Add support for BC3450 board 
Signed-off-by: dzu@denx.de <dzu@denx.de>
 2006-04-21 18:30:47 +02:00
Kumar Gala 8fe9bf61ef Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port: 
- Removed MPC8349ADS port
  - Added PCI support to MPC8349ADS
  - reworked memory map to allow mapping of all regions with BATs
  Patch by Kumar Gala 20 Apr 2006

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
 2006-04-20 13:45:32 -05:00
Heiko Schocher a83531bb62 * Update PK1C20 board for Nios-II 5.0 
Patch from Scott McNutt, 11 Aug 2005
  -Update base addresses for standard configuration
  -Eliminate use of CACHE_BYPASS in board code
 2006-04-20 12:57:43 +02:00
Heiko Schocher 9acb626fc1 Add MCF5282 support (without preloader) 
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
 2006-04-20 08:42:42 +02:00
dzu@denx.de 56a4a63c10 Added missing nand.c for NC650 board 
Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>
 2006-04-19 15:27:11 +02:00
dzu@denx.de a367d42640 Update for NC650 board. Add NC650 based CP850 configuration. 
Signed-off-by: dzu@denx.de <dzu@denx.de>
 2006-04-19 11:52:46 +02:00
Wolfgang Denk cf48eb9abd Some code cleanup 2006-04-16 10:51:58 +02:00
Wolfgang Denk 807522fc9a Merge with /home/hs/U-Boot/u-boot-dev 2006-04-16 10:27:31 +02:00
Wolfgang Denk b28a31ca02 Merge with /home/m8/git/u-boot 2006-04-12 12:26:32 +02:00
Heiko Schocher ad88297e2f * Fix dbau1x00 Board 
- Fix dbau1x00 boards broken by dbau1550 patch
    PLL:s were not set for boards other than 1550.
    Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
    Default boot is now bootp for cards other than 1550.
  Patch by Thomas Lange Aug 10 2005
 2006-04-11 14:53:29 +02:00
Marian Balakowicz 6db3970811 Fix JFFS2 support for legacy NAND driver. 
Some more NAND cleanup and small fixes.
 2006-04-08 19:08:06 +02:00
Wolfgang Denk 3a5e21881a MCC200 Board: fix flash unprotection code for flash > 32 MB. 2006-04-06 15:03:42 +02:00
Wolfgang Denk 9bc97a3d91 Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pci 2006-04-06 10:42:23 +02:00
Wolfgang Denk 534ff676a9 * Add support for ymodem protocol download 
Patch by Stefano Babic, 29 Mar 2006

* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000

Merge with /home/mk/8-benq/u-boot
 2006-04-01 15:52:46 +02:00
Wolfgang Denk d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Markus Klotzbuecher 9e7b5ce61b delta board: one more DA9030 fix. 2006-03-30 17:00:39 +02:00
Markus Klotzbuecher eeaab720f6 Change delta board memory map to start at 0x80000000. 2006-03-29 17:59:20 +02:00
Markus Klotzbuecher 89f2dfa4c3 delta board: minor update to DA9030 code. 2006-03-29 17:49:27 +02:00
Rafal Jaworowski b66a938342 Set SDelay register in the DDR controller for the MPC5200B chip. 2006-03-29 13:17:09 +02:00
Markus Klotzbuecher c855ef6768 delta board: fix DA9030 reset procedure. 2006-03-27 16:01:03 +02:00
Markus Klotzbuecher 2770bcb21c Merge with http://www.denx.de/git/u-boot.git 2006-03-24 15:43:16 +01:00
Markus Klotzbuecher ba70d6a417 delta board: DA9030 initialization and i2c support. Some minor changes to 
make the pxa i2c driver work with the monahans cpu.
 2006-03-24 12:23:27 +01:00
Markus Klotzbuecher 552fc624f2 Cleanup of the monahans cpu and delta board port. 2006-03-20 20:19:37 +01:00
Wolfgang Denk 0a112d8696 Merge with port of MPC8349EMDS board 2006-03-17 17:41:56 +01:00
Wolfgang Denk 09e4b0c5d3 Add support for Lite5200B board. 
Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
 2006-03-17 11:42:53 +01:00
Rafal Jaworowski dc9e499c62 Support for DDR with 32-data path. Addotional notes on injecting 
multiple-bit errors.
 2006-03-16 17:46:46 +01:00
Marian Balakowicz d326f4a242 Add command for handling DDR ECC registers on MPC8349EE MDS board. 2006-03-16 15:19:35 +01:00
Marian Balakowicz 991425fe05 Add initial support for MPC8349E MDS board. 2006-03-14 16:24:38 +01:00
Wolfgang Denk ff7fefe679 Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and 
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
 2006-03-13 12:37:35 +01:00
Wolfgang Denk 84c960ce6d Add support for EmbeddedPlanet EP88x boards 
Patch by Yuli Barcohen, 13 Jul 2005
 2006-03-12 23:17:31 +01:00
Wolfgang Denk 763b5f34c3 Remove board specific configuration includes from the common xilinx 
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
 2006-03-12 23:13:27 +01:00
Wolfgang Denk 47705af5da Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads 2006-03-12 21:49:19 +01:00
Wolfgang Denk 8e7b703a62 Coding Style cleanup 2006-03-12 02:55:22 +01:00
Wolfgang Denk 6cb142fa3b Add missing Blackfin files. 2006-03-12 02:12:27 +01:00
Wolfgang Denk 8ff0208d31 Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:55:43 +01:00
Wolfgang Denk aba9f1af60 Memory configuration changes for ZPC.1900 board 
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:45:44 +01:00
Wolfgang Denk 5797b821dc Add support for Adder boards with 16MB SDRAM; 
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:43:03 +01:00
Wolfgang Denk 84ef51a632 Fix cleanup for netstart board. 
Remove build results from repository
 2006-03-12 00:04:20 +01:00
Wolfgang Denk d2ed2f661b More GCC 4.x woes 2006-03-11 23:07:09 +01:00
Wolfgang Denk 8de7ed3abe More GCC 4.x code cleanup 2006-03-11 22:56:07 +01:00
Wolfgang Denk d52fb7e3d1 Some code cleanup for GCC 4.x 2006-03-11 22:53:33 +01:00
Wolfgang Denk 951a954b77 Merge with /home/wd/git/u-boot/master 
Code cleanup.
 2006-03-06 23:18:48 +01:00
Markus Klotzbcher 43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash 
Controller.
 2006-03-06 15:04:25 +01:00
Markus Klotzbcher f9e029184b NAND finally working. Two bugs fixed: 
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
 2006-03-06 13:45:42 +01:00
Wolfgang Denk bfc81252c0 Minor code cleanup 2006-03-06 13:03:37 +01:00
Wolfgang Denk 4e3ccd2692 Merge the new NAND code (testing-NAND brach); see doc/README.nand 
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005

[Merge with /home/tur/nand/u-boot]
 2006-03-06 11:25:22 +01:00
Bartlomiej Sieka addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific 
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
 2006-03-05 18:57:33 +01:00
Markus Klotzbcher bf7cac033b Lots of new stuff: 
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
 2006-03-04 18:35:51 +01:00
Stefan Roese f1ee982506 Add lowboot target to mcc200 board 
Patch by Stefan Roese, 4 Mar 2006
 2006-03-04 14:57:03 +01:00
Markus Klotzbcher f8785e96c9 Erasing works too now. The CS don't care causes problem with READSTATUS, 
don't ask me why. There are still bugs in the bad block logic.
 2006-03-03 20:13:43 +01:00
Markus Klotzbcher 24e1217be3 Write operation is working. Turned out that the READSTATUS hack was wrong 
after all.
 2006-03-03 16:09:28 +01:00
Markus Klotzbcher 9187a35b6c Writing is working, but there's still a bug that causes the data written to 
start at an offset of 4 bytes from the start of the page.
 2006-03-03 15:37:01 +01:00
Markus Klotzbcher 19fdeff433 Implemented writing, not working yet. 2006-03-03 12:11:11 +01:00
Markus Klotzbcher e2053f9c7a Moved the waiting loop for "Read Data Request" RDDREQ into the 
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
 2006-03-02 14:02:36 +01:00
Markus Klotzbcher bb1ff049fb Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since 
there are 0)
 2006-03-02 12:10:01 +01:00
Markus Klotzbcher 481911c78c Further NAND stuff implemented. Basic read commands seem to work. 2006-03-01 23:33:27 +01:00
Stefan Roese f18e874ad5 Fix problem with flash_get_size() from CFI driver update 
Patch by Stefan Roese, 1 Mar 2006
 2006-03-01 17:00:49 +01:00
Markus Klotzbcher 00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Markus Klotzbcher 6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Stefan Roese 58ad497833 Convert mcc200 to use common CFI flash driver 
Patch by Stefan Roese, 28 Feb 2006
 2006-02-28 15:33:28 +01:00
Stefan Roese 79b4cda076 Major CFI-FLASH driver update: 
* Add env-variable "unlock" to handle initial state of sectors
  (locked/unlocked).

  Only the U-Boot image and it's environment is protected,
  all other sectors are unprotected (unlocked) if flash
  hardware protection is used (CFG_FLASH_PROTECTION) and
  the environment variable "unlock" is set to "yes".

  Patch by Stefan Roese, 28 Feb 2006

* Update drivers/cfi_flash.c:
  - find_sector() called in both versions of flash_write_cfiword()
  Patch by Peter Pearse, 27th Feb 2006

* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
  Patch by Jose Maria Lopez, 16 Jan 2006

* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29

* Changes/fixes for drivers/cfi_flash.c:
  We *should* check if there are any error bits if the previous call
  returned ERR_OK (Otherwise we will have output an error message in
  flash_status_check() already.)  The original code would only check for
  error bits if flash_status_check() returns ERR_TIMEOUT.
  Patch by Marcus Hall, 23 Aug 2005

* Changes/fixes for drivers/cfi_flash.c:
  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
  Patch by Sangmoon Kim, 19 Aug 2005

* Fixes for drivers/cfi_flash.c:
  - Fix wrong timeout value usage in flash_status_check()
  - Round write_tout up when converting to msec in flash_get_size()
  - Remove clearing flash status at the end of flash_write_cfibuffer()
    which sets Intel 28F640J3 flash back to command mode on CSB472
  Patch by Tolunay Orkun, 02 July 2005
 2006-02-28 15:29:58 +01:00
Markus Klotzbcher 0377dca227 Merge /home/tur/nand/u-boot/ 
This is a first version of the testing-NAND branch merged back to main.
 2006-02-24 14:16:31 +01:00
Markus Klotzbcher 7d4d1ce48c Merge branch 'master' of http://www.denx.de/git/u-boot 2006-02-24 11:34:34 +01:00
Bartlomiej Sieka 038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Wolfgang Denk c81eb1f5f5 Cleanup MCC200 board. 2006-02-24 01:42:40 +01:00
Markus Klotzbcher 599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbcher ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems, 
we only see 64MB.
 2006-02-22 14:05:44 +01:00
Wolfgang Denk 86ea5f93d7 Initial port to MCC200 board (work in progress) 
Minimally modified patch by Bluetechnix, Vienna
 2006-02-22 00:43:16 +01:00
Markus Klotzbcher 48b6242aa1 SDRAM seems to be working on delta board, though u-boot doesn't start yet. 2006-02-22 00:06:01 +01:00
Markus Klotzbcher 4f7a0e3671 New board directory and config for the benq delta board (copied from 
zylonite). Minor pxa-regs.h update.
 2006-02-20 16:37:37 +01:00
Markus Klotzbcher b3c36e6b94 basic u-boot is working, boots into the command shell. 2006-02-09 13:19:25 +01:00
Markus Klotzbcher 9d803d8c0b Changes: 
* lots of bugfixes in the assembler code
	* reverted hardware.h back to original
	* enabled hardware DRAM calibration
	* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
 2006-02-08 18:56:28 +01:00
Stefan Roese 79830d591a Convert CPCI750 to use common CFI flash driver 
Patch by Reinhard Arlt, 8 Feb 2006
 2006-02-08 15:54:15 +01:00
Markus Klotzbcher af646e865f Forgot to add files to zylonite branch. 2006-02-07 20:48:45 +01:00
Stefan Roese 48a05a5188 Various changes to esd HH405 board specific files 
Patch by Matthias Fuchs, 07 Feb 2006
 2006-02-07 16:51:04 +01:00
Zachary P. Landau 3a108ed868 Add support for r5200 board 2006-01-26 17:37:59 -05:00
Stefan Roese 18c5e64c5b Fix various compiler warnings on ppc4xx builds (ELDK 4.0) 
Patch by Stefan Roese, 18 Jan 2006
 2006-01-18 20:06:44 +01:00
Stefan Roese a7b9fb9110 Add VGA support (CT69000) to CPCI750 board. 
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005
 2006-01-18 20:05:34 +01:00
Stefan Roese 2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file. 
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
 2006-01-18 20:03:15 +01:00
Wolfgang Denk c4b465f63e Fix 28F256J3A support on PM520 board 
(without bank-switching only 32 MB can be accessed)
 2006-01-13 17:00:56 +01:00
Kumar Gala 86902b8e36 Added PCI support for MPC8349ADS board 
Patch by Kumar Gala 11 Jan 2006
 2006-01-12 19:51:38 -06:00
Wolfgang Denk c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Wolfgang Denk 27e166b875 Fix compiler problem with at91rm9200dk board. 
Patch by Eugen Bigz, 19 Dec 2005
 2005-12-19 13:02:45 +01:00
Stefan Roese 81a3170b15 Changes to Yellowstone & Yosemite 440EP/GR eval boards: 
- Changed GPIO setup to enable another address line in order to
  address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
  the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
 2005-12-15 09:43:12 +01:00
Wolfgang Denk 7481266e4e 2005-12-12 16:06:05 +01:00
Wolfgang Denk f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Stefan Roese d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked: 
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
 2005-11-30 13:06:40 +01:00
Stefan Roese 6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. 
Patch by John Otken, 23 Nov 2005
 2005-11-29 18:18:21 +01:00
Stefan Roese 1178a412d2 Minor AMCC 4xx board cleanups 
Patch by Stefan Roese, 27 Nov 2005
 2005-11-29 18:17:41 +01:00
Stefan Roese 3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style: 
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
 2005-11-27 19:36:26 +01:00
Stefan Roese 5568e613ee Add support for Prodrive P3P440 board: 
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
 2005-11-22 13:20:42 +01:00
Wolfgang Denk fe126d8b34 Change all '$(...)' variable references into '${...}' 
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
 2005-11-20 21:40:11 +01:00
Rafal Jaworowski 5a164c8ca9 Minor changes to init flags in TQM834x PCI. 2005-11-17 00:26:18 +01:00
Stefan Roese c7911c7e8f Merge with /server/home/stefan/git/u-boot/bamboo-sdram 2005-11-15 16:23:41 +01:00
Stefan Roese fd49bf0214 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) 
Patch by Stefan Roese, 15 Nov 2005
 2005-11-15 16:04:58 +01:00
Stefan Roese feaedfcf84 New PPC 405EP board added: CMS700 
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
 2005-11-15 10:35:59 +01:00
Stefan Roese ea339205a9 Updated PCI mapping for esd CPCI2DP board. 
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
 2005-11-08 09:00:09 +01:00
Stefan Roese f190c11b1f Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size 
Patch by Stefan Roese, 05 Nov 2005
 2005-11-05 15:50:16 +01:00
Stefan Roese ef04a0aa26 Additional fix for external IRQ config on Yellowstone & Yosemite 
Patch by Stefan Roese, 03 Nov 2005
 2005-11-03 08:31:33 +01:00
Stefan Roese 57275b69c6 Add support for Ocotea pass 3 with 440GX Rev. F 
Patch by Stefan Roese, 01 Nov 2005
 2005-11-01 10:08:03 +01:00
Stefan Roese d9f2f5008c Merge with /git/u-boot.git 2005-11-01 10:02:21 +01:00
Wolfgang Denk 5d4ee51061 Merge with /home/m8/git/u-boot 2005-10-29 23:45:04 +02:00
Marian Balakowicz 63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Marian Balakowicz 170d5e6d4c Fix conflicting types (flash_write()) in trab auto_update.c 2005-10-28 15:29:43 +02:00
Stefan Roese e190290ba4 Fix external IRQ configuration on Yellowstone & Yosemite 
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).

Patch by Stefan Roese, 28 Oct 2005
 2005-10-28 12:21:06 +02:00
Wolfgang Denk 7b5cac0e19 Merge with /home/wd/git/u-boot/master 2005-10-21 22:41:25 +02:00
Stefan Roese a547775bac Fix conflicting types (flash_write()) in esd auto_update.c 
Patch by Stefan Roese, 20 Oct 2005
 2005-10-20 16:39:16 +02:00
Rafal Jaworowski 6902df56a0 Add PCI support for the TQM834x board. 2005-10-17 02:39:53 +02:00
Wolfgang Denk 84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Wolfgang Denk 77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk 814d98f24e Add missing files for Pantelis Antoniou's patch 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:59:29 +02:00
Wolfgang Denk cbdf8824fa Merge with /home/sr/git/u-boot 2005-10-13 01:55:58 +02:00
Wolfgang Denk b604a40b4f Cleanup 2005-10-13 01:50:05 +02:00
Wolfgang Denk 070610c529 Add support for OF flat tree for the STXtc board. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:49:09 +02:00
Wolfgang Denk f57f70aab9 Support passing of OF flat trees to the kernel. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:45:54 +02:00
Marian Balakowicz e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk 3df5bea0b0 Add support for NetSilicon NS7520 processor. 
Patch by Art Shipkowski, 12 May 2005

Cleanup.
 2005-10-09 01:41:48 +02:00
Wolfgang Denk 7521af1c7d Add support for AP1000 board. 
Patch by James MacAulay, 07 Oct 2005
 2005-10-09 01:04:33 +02:00
Wolfgang Denk 95f9dda216 Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200 
Patch by Anders Larsen, 07 Oct 2005

The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
 2005-10-09 00:33:37 +02:00
Wolfgang Denk 96782c63d3 Cleanup warnings for cpu/arm720t & cpu/arm1136 files. 
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
 2005-10-09 00:22:48 +02:00
Stefan Roese c29ab9d71d Fix gzip bmp support (test if malloc fails, warning when truncated). 
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
 2005-10-08 10:19:07 +02:00
Wolfgang Denk b8e16a3450 Cleanup 2005-10-06 23:44:55 +02:00
Wolfgang Denk 64db4b10a5 Make "split_by_variant.sh" executable. 2005-10-06 17:09:56 +02:00
Wolfgang Denk 87cb6862b9 Update make target for ARM supported boards. 
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
 2005-10-06 17:08:18 +02:00
Wolfgang Denk f5c254d719 Fix the machine-id of the Cogent csb637 board 
Patch by Anders Larsen, 05 Oct 2005
 2005-10-06 01:26:16 +02:00
Wolfgang Denk 645da51097 Add support for Cogent csb637 
Patch by Anders Larsen, 29 Apr 2005
 2005-10-05 02:00:09 +02:00
Wolfgang Denk 080bdb7f3a * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 
Patch by Anders Larsen, 29 Apr 2005

* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
  (8e2be51de8)
 2005-10-05 01:51:29 +02:00
Wolfgang Denk 99b0d2851a Added support for KwikByte KB920x boards (based on AT91RM9200) 
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
 2005-10-05 00:19:34 +02:00
Wolfgang Denk 45237bc00b Add support for S29GL064M-R3 flash chip on xsengine board 
Patch by Kurt Stremerch, 18 Apr 2005
 2005-10-05 00:03:55 +02:00
Wolfgang Denk 9b880bd4d8 Update ARM Integrator boards: 
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
 2005-10-04 23:10:28 +02:00
Stefan Roese 93b17ec382 Change board message on AMCC Yosemite & Yellowstone to common style 
Patch by Stefan Roese, 3 Oct 2005
 2005-10-03 15:27:50 +02:00
Stefan Roese 2c7b2ab5a0 Fix problem with SM501 init on HH405 board. 
Patch by Stefan Roese, 30 Sep 2005
 2005-09-30 16:41:12 +02:00
Wolfgang Denk 0e4018d244 Add support for MP2USB board. 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:14:38 +02:00
Wolfgang Denk c570b2fdf5 Add board support for armadillo HT1070 
Patch by Rowel Atienza, 06 Apr 2005
 2005-09-26 01:06:33 +02:00
Wolfgang Denk 8e6f1a8ec2 Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board 
Patch by Marc Leeman, 04 Mar 2005
 2005-09-25 18:59:36 +02:00
Wolfgang Denk 716c1dcb41 Cleanup 2005-09-25 18:49:35 +02:00
Wolfgang Denk 49a7581c6c OMAP242x H4 board update 
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
 2005-09-25 18:41:04 +02:00
Wolfgang Denk c177bb5f6c Fix VOH405 Support 
Patch by Matthias Fuchs, 25 Sep 2005
 2005-09-25 16:31:16 +02:00
Wolfgang Denk 1972dc0a9e Added support for PCI bridge on MPC8272ADS 
Patch by Vitaly Bordug, Feb 09 2005
 2005-09-25 16:27:55 +02:00
Wolfgang Denk 0148e8cb43 Update multicore CM9XX support for Integrator AP to allow booting from flash 
Patch by Jean-Paul Saman, 8 Feb 2005
 2005-09-25 16:22:14 +02:00
Wolfgang Denk 70a2047ff6 Add Vibren (was Accelent) PXA255 IDP Support 
Patch by Cliff Brake, 04 Feb 2005
 2005-09-25 15:59:01 +02:00
Wolfgang Denk fe7eb5d88b Cleanup 2005-09-25 02:00:47 +02:00
Wolfgang Denk 74f4304ee7 Add ARM946E cpu and core module targets; remap memory to 0x00000000 
Patch by Peter Pearse, 2 Feb 2005
 2005-09-25 01:48:28 +02:00
Wolfgang Denk c97a2aaf27 OMAP242x fix for GP device booting 
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
 2005-09-25 00:59:24 +02:00
Wolfgang Denk 265817c7e6 Add support for AMD's Pb1x00 eval board; 
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
 2005-09-25 00:53:22 +02:00
Wolfgang Denk b63de2c053 Update omap5912osk board: 
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
 2005-09-25 00:23:05 +02:00
Wolfgang Denk 3706ba1a36 Fix warnings for PCI code on ixp 
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
 2005-09-25 00:00:45 +02:00
Wolfgang Denk 2b792afcc5 * Fix PHY address argument passing with mii info command 
Patch by Andrew Dyer, 28 Dec 2004

* Cleanup: fix broken builds
 2005-09-24 21:54:50 +02:00
Wolfgang Denk 9ea4b5886a More cleanup: get rid or redundand #defines 2005-09-23 13:12:15 +02:00
Wolfgang Denk 0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk a6e6cf0036 Merge with /home/wd/git/u-boot/work 2005-09-22 09:46:19 +02:00
Stefan Roese 7644f16f6b esd CPCI2DP board added 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:16:57 +02:00
Stefan Roese 026cb5d864 esd PMC405 board updated 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:07:15 +02:00
Stefan Roese 98f4a3dfcb Add SM501 support to HH405 board. 
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
 2005-09-22 09:04:17 +02:00
Wolfgang Denk 8b4c9e7c14 Fix bug in auto_update (trab board) 
Patch by Martin Krause, 16 Sep 2005
 2005-09-21 15:31:25 +02:00
Stefan Roese 34c0a5e98b Update AMCC Yosemite to get a consistent setup for all AMCC eval 
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
 2005-09-15 11:34:07 +02:00
Wolfgang Denk ac7eb8a315 Update of new NAND code 
Patch by Ladislav Michl, 13 Sep 2005
 2005-09-14 23:53:32 +02:00
Wolfgang Denk 5d244ea128 Merge with /home/sr/git/u-boot: 
Add I2C support for TQM85xx
 2005-09-06 22:17:16 +02:00
Wolfgang Denk 6d51e505ad Cleanup compiler warnings. 2005-09-03 01:58:35 +02:00
Stefan Roese 9d2a873bdf Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT). 
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
 2005-08-31 12:55:50 +02:00
Wolfgang Denk 807d5d7319 Fix problems with ld version 2.16 (dot outside sections problem) 
Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
 2005-08-31 12:28:00 +02:00
Wolfgang Denk 9f96ae44c6 Add keyboard and dot matrix display support for HMI1001 board. 2005-08-30 13:04:12 +02:00
Wolfgang Denk ec2e5a2cce Merge with testing-4xx_enet (Create generic 4xx Ethernet code) 2005-08-23 23:03:20 +02:00
Stefan Roese 5e4b3361bc Add esd cpci5200 and pf5200 boards 
Patch by Reinhard Arlt, 22 Aug 2005
 2005-08-22 17:51:53 +02:00
Wolfgang Denk c7db9a3805 Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2 
Patch by Martin Krause, 08 Jun 2005
 2005-08-19 00:53:02 +02:00
Wolfgang Denk 6617aae9b9 Add new board specific commands for TQM5200/STK52XX 
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
 2005-08-19 00:46:54 +02:00
Wolfgang Denk 601aed1e8f Add automatic HW detection for another CMC_PU2 variant 
Patch by Martin Krause, 20 Apr 2005
 2005-08-19 00:08:55 +02:00
Wolfgang Denk e8aa824eb2 Fix initialization problem on TQM5200 without SM501 
Patch by Martin Krause, 8 Apr. 2005
 2005-08-18 11:55:22 +02:00
Stefan Roese d6c61aabc4 Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c 
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
 2005-08-16 18:18:00 +02:00
22e05df45c Merge with pollux.denx.org:/home/git/u-boot/.git 2005-08-16 17:34:22 +02:00
Wolfgang Denk 98128f389c Enable PCI on hmi1001 board 2005-08-16 15:17:53 +02:00
Wolfgang Denk 3d078ce6d7 Coding style cleanup 2005-08-15 16:03:56 +02:00