Commit graph

14 commits

Author SHA1 Message Date
Daniel Schwierzeck
265072ba75 MIPS: add .padding section to linker script
Commit 79fd7e649e

    MIPS: always keep all sections in u-boot ELF binary.

    Always keep all sections in u-boot ELF binary. Move all unneeded
    sections after _end to avoid allocating space in the final binary.
    Also remove .deadcode section which is now obsolete.

removed section .deadcode because the original symptoms were not
visible anymore. Unfortuneatly the binutils bug still exists.

The size of .rel.dyn section is often bigger than needed for all
entries. But objcopy only allocates space as much as required for all
reloc entries. Thus there is a gap between the last entry and
__rel_dyn_end in u-boot.bin. If u-boot is booted from RAM (e.g. in
SPL scenarios) that area could contain garbage data which could lead
to CPU exceptions during relocation.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-11-01 18:18:05 +01:00
Daniel Schwierzeck
837cad1e47 MIPS: refactor setting of compiler options
Refactor and unify all compiler settings in arch/mips/config.mk.
Also add tune flags for each supported CPU type.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-11-01 18:18:05 +01:00
Masahiro Yamada
90f984e397 kconfig: delete redundant CONFIG_${ARCH} definition
CONFIG_${ARCH} is defined by Kconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2014-07-30 14:42:02 -04:00
Paul Burton
9f0868fffb MIPS: allow use of generic board
This patch allows MIPS boards to make use of generic board, replacing
arch/mips/lib/board.c with common/board_{f,r}.c and struct bd_info with
the asm-generic version.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-20 13:16:43 +02:00
Daniel Schwierzeck
79fd7e649e MIPS: always keep all sections in u-boot ELF binary.
Always keep all sections in u-boot ELF binary. Move all unneeded
sections after _end to avoid allocating space in the final binary.
Also remove .deadcode section which is now obsolete.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-04-20 13:16:42 +02:00
Masahiro Yamada
9b6e2c363f kbuild: fix CROSS_COMPILE settings in config.mk
The syntax
  CROSS_COMIPLE ?= <cross_compiler_prefix>
does not work because config.mk is parsed after
exporting CROSS_COMPILE.

Like Linux Kernel's arch/$(ARCH)/Makefile,
we must write as follows:

  ifeq ($(CROSS_COMPILE),)
  CROSS_COMPILE := <cross_compiler_prefix>
  endif

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-04 12:15:30 -05:00
Masahiro Yamada
95ddcd68ab kbuild: rename OBJCFLAGS to OBJCOPYFLAGS
Rename OBJCFLAGS to OBJCOPYFLAGS beforehand to use
"cmd_objcopy" in scripts/Makefile.lib in an upcoming commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25 11:01:28 -05:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Gabor Juhos
04380c651a MIPS: add dynamic relocation support
The code handles relocation entries with the
following relocation types only:
  mips32: R_MIPS_REL32
  mips64: R_MIPS_REL+R_MIPS_64
  xburst: R_MIPS_REL32

Other relocation entries are skipped without
processing. The code must be extended if other
relocation types must be supported.

Add -pie to LDFLAGS_FINAL to generate the .rel.dyn
fixup table, which will be applied to the relocated
image before transferring control to it.

The CONFIG_NEEDS_MANUAL_RELOC is not needed
after the patch, so remove that as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12 22:22:13 +01:00
Daniel Schwierzeck
0efcdb15f9 MIPS: move CONFIG_STANDALONE_LOAD_ADDR to CPU config makefiles
Prepare for upcoming MIPS64 CPU support.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2012-08-24 00:34:47 +02:00
Daniel Schwierzeck
2c0e3de384 MIPS: factor out endianess flag handling to arch config.mk
This is CPU independent and should be configured architecture-wide.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2012-08-24 00:34:43 +02:00
Daniel Schwierzeck
660da0947a MIPS: Introduce --gc-sections for MIPS
All architectures but MIPS are using --gc-sections on final linking.
This patch introduces that feature for MIPS to reduce the memory and
flash footprint.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Thomas Lange <thomas@corelatus.se>
Cc: Vlad Lungu <vlad.lungu@windriver.com>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-05-10 00:08:10 +09:00
Wolfgang Denk
8ae86b76c6 Make STANDALONE_LOAD_ADDR configurable per board
Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR
and allow that the architecture-specific default value gets
overwritten by defining the value in the board header file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-04-12 22:58:32 +02:00
Peter Tyser
ea0364f1bb Move lib_$ARCH directories to arch/$ARCH/lib
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:03 +02:00
Renamed from lib_mips/config.mk (Browse further)