Commit graph

573 commits

Author SHA1 Message Date
Wolfgang Denk
0020db3f0d Merge remote branch 'origin/master' into next 2010-03-29 12:33:43 +02:00
Wolfgang Denk
a574cff121 ml300: remove support for broken, orphaned board
The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-03-28 00:18:58 +01:00
Wolfgang Wegner
9d79e5758c add ASTRO MCF5373L board
This patch adds support for ASTRO board(s) based on MCF5373L.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2010-03-24 11:08:28 -05:00
Detlev Zundel
fd428c05c8 mpc5xxx: Remove all references to MGT5100
We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-03-21 22:44:42 +01:00
Detlev Zundel
9c9cbe78dc mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.
This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-03-12 09:49:23 +01:00
Heiko Schocher
67fa8c25f5 arm: add support for the suen3 board from keymile
Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common config options
are collected in include/configs/km_arm.h. Also, this board
use common code for all keymile boards, which is stored in
board/keymile/common/common.c

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-07 12:36:36 -06:00
Stefano Babic
c5fb70c911 Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fred Fan <fanyefeng@gmail.com>
2010-03-07 12:36:36 -06:00
Sandeep Paulraj
3fca29294a DaVinci: Adding entry to MAKEALL for DM365 EVM
The patch adds an entry for the DM365 EVM to MAKEALL

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-03-07 12:36:35 -06:00
Jens Scharsig
77e7273c40 new board (eb_cpux9k2)
* new board (eb_cpux9k2)
 * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG
 * select via make eb_cpux9k2_config
 * this also demonstrates, how to use boards with AT91RM9200 cpu
   in at91 arch tree

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12 12:36:04 -06:00
Matthias Kaehlcke
cf3c142ee4 Add support for EDB93xx boards
Added support for the following EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-02-12 12:31:54 -06:00
Daniel Gorsulowski
44d8025622 at91: Add esd gmbh OTC570 board support
This patch adds support for esd gmbh OTC570 board.
The OTC570 is based on an Atmel AT91SAM9263 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-02-12 12:31:53 -06:00
Wolfgang Denk
5c1a1a3069 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2010-02-03 20:05:27 +01:00
Wolfgang Denk
d0750bc9e5 EXBITGEN: drop support for unmaintained board
The EXBITGEN board has not been maintained for a long time; it has
build problems, but no hardware is available any more for testing.

Drop support for this board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2010-02-03 20:01:16 +01:00
Liu Yu
674ef7bd02 Nand boot: Add nand boot support for MPC8569mds board
This patch add nand boot support for MPC8569mds board.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
2010-01-27 14:22:40 -06:00
Liu Yu
c95d541e4b ppc/85xx: Add ATM config for MPC8569MDS
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:14:35 -06:00
Vipin KUMAR
7da6923604 SPEAr : Support added for SPEAr320 board
SPEAr320 SoC support contains basic spear320 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
080cfee714 SPEAr : Support added for SPEAr310 board
SPEAr310 SoC support contains basic spear310 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
7e074158ce SPEAr : Support added for SPEAr300 board
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
566c9c16fe SPEAr : Support added for SPEAr600 board
SPEAr600 SoC support contains basic spear600 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Harald Krapfenbauer
2aeda2d054 Blackfin: tcm-bf518: new board port
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Michael Hennerich
10eafa10be Blackfin: add support for BF527-EZKIT v2.1
The new board revision has a different LCD.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Valentin Yakovenkov
446707c90f Blackfin: bf561-acvilon: new board port
Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Reinhard Arlt
1dee9be683 mpc83xx: Add support for MPC8349 esd caddy2
The caddy2 is a variant of the already supported vme8349. So we just
add the differences to this board port. To better support those two
boards we switched from fixed SDRAM configuration to usage of
spd_sdram(). This is done by providing a board specific SPD EEPROM
routine with different values for both boards.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

changed to use mkconfig -t option instead, plus misc codingstyle fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07 18:34:31 -06:00
Anton Vorontsov
2e95004deb mpc83xx: Add NAND boot support for MPC8315E-RDB boards
The core support for NAND booting is there already, so this patch
is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to
be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code
from mpc8313erdb boards, and so to not duplicate the code we just
symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

o silence make during ln echo
o update documentation
o and avoid:

$ ./MAKEALL MPC8315ERDB_NAND
Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

by renaming udelay -> __udelay in the spirit of commit
3eb90bad65 "Generic udelay() with watchdog
support".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07 18:33:52 -06:00
Wolfgang Denk
35e3717772 Merge branch 'master' of ../work into next 2009-12-07 23:42:33 +01:00
Peter Tyser
f2352877cb MAKEALL: Fix return value
Previously MAKEALL would always return a value of 0, even if 1 or more
boards did not compile.  This change causes MAKEALL to return 0 if all
boards were able to build, otherwise 1.

This change also requires changing the script interpreter from sh to
bash to support bash's PIPESTATUS variable.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-07 23:06:42 +01:00
Po-Yu Chuang
43a5f0df2f arm: A320: Add support for Faraday A320 evaluation board
This patch adds support for A320 evaluation board from Faraday. This board
uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM.
FA526 is an ARMv4 processor and uses the ARM920T source in this patch.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-27 16:26:17 -06:00
Sekhar Nori
2819e1365b TI DA8xx: Integrate DA830 EVM support into U-Boot
Integrate DA830 EVM support into U-Boot.

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
Digital EVM board. See http://www.spectrumdigital.com/

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27 16:26:16 -06:00
Wolfgang Grandegger
cd12f615e4 mpc52xx: add support for the IPEK01 board
This patch adds support for the board IPEK01 based on the MPC5200.
The Futjitsu Lime graphics controller is configured in 16 bpp mode.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2009-10-31 16:14:35 +01:00
Wolfgang Denk
922754cc82 Merge branch 'master-sync' of git://git.denx.de/u-boot-arm 2009-10-24 22:26:09 +02:00
Tom Rix
e63e5904b4 TI OMAP3 SDP3430: Initial Support
Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
	Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
	3 UARTs and expanded 4 UART ports + IrDA
	Ethernet, USB
Other peripherals:
	TWL5030 PMIC+Audio+Keypad
	VGA display
Expansion ports:
	Memory devices plugin boards (PISMO)
	Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
		 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

	Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-24 09:55:25 -05:00
Sandeep Paulraj
5df65cf56a TI: DaVinci: DM355 Leopard board support
This patch adds support for the leopard board which is
based on the DM355 SOC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
6ab176d709 TI DaVinci DM646x: Adding initial support for DM6467 EVM
This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Dipen Dudhat
fad15096e3 ppc/P1_P2_RDB: On-chip BootROM support
On Chip BootROM support for P1 and P2 series RDB platforms.

This patch is derived from latest On Chip BootROM support on MPC8536DS

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-16 10:21:39 -05:00
Dipen Dudhat
f7780ec977 ppc/P1_P2_RDB: NAND Boot Support
NAND Boot support for P1 and P2 series RDB platforms.

This patch is derived from NAND Boot support on MPC8536DS.

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-16 10:21:39 -05:00
Minkyu Kang
8bc4ee9e82 s5pc1xx: add support SMDKC100 board
Adds new board SMDKC100 that uses s5pc100 SoC

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
2009-10-13 21:13:55 -05:00
Simon Kagstrom
e92daeb5c2 Support for the OpenRD base board
The implementation is borrowed from the sheevaplug board and the Marvell
1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-10-13 06:17:36 -05:00
Tom Rix
23b80982a0 Add support for Eukrea CPU9260/CPU9G20 SBC
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Tom Rix
d8380c9d35 Add support for Eukrea CPUAT91 SBC
CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Mingkai Hu
e40ac4870c On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.

The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.

The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.

This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:11 -05:00
Mingkai Hu
9a1a0aedbb NAND boot: MPC8536DS support
MPC8536E can support booting from NAND flash which uses the
image u-boot-nand.bin. This image contains two parts: a 4K
NAND loader and a main U-Boot image. The former is appended
to the latter to produce u-boot-nand.bin. The 4K NAND loader
includes the corresponding nand_spl directory, along with the
code twisted by CONFIG_NAND_SPL. The main U-Boot image just
like a general U-Boot image except the parts that included by
CONFIG_SYS_RAMBOOT.

When power on, eLBC will automatically load from bank 0 the
4K NAND loader into the FCM buffer RAM where CPU can execute
the boot code directly. In the first stage, the NAND loader
copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
then loads the main image from NAND flash to RAM or L2SRAM
and boot from it.

This patch implements the NAND loader to load the main image
into L2SRAM, so the main image can configure the RAM by using
SPD EEPROM. In the first stage, the NAND loader copies itself
to the second to last 4K address space, and uses the last 4K
address space as the initial RAM for stack.

Obviously, the size of L2SRAM shouldn't be less than the size
of the image used. If so, the workaround is to generate another
image that includes the code to configure the RAM by SPD and
load it to L2SRAM first, then relocate the main image to RAM
to boot up.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:06 -05:00
Wolfgang Denk
5e498dfab8 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-09-24 23:40:25 +02:00
Paul Gortmaker
2738bc8df6 sbc8548: allow enabling PCI via a make config option
Prior to this commit, to enable PCI, you had to go manually
edit the board config header, and if you had 33MHz PCI, you
had to manually change CONFIG_SYS_NS16550_CLK too, which was
not real user friendly,

This adds the typical PCI and clock speed make targets to the
toplevel Makefile in accordance with what is being done with
other boards (i.e. using the "-t" to mkconfig).

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:05:00 -05:00
Peter Tyser
55f786d8ba MAKEALL: Use POSIX math
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-24 00:37:43 +02:00
Peter Tyser
40a28f0885 MAKEALL: Add summary information
This change adds some basic summary information to the MAKEALL script.
The summary information includes how many boards were compiled, how many
boards had compile warnings or errors, and which specific boards had
compile warnings or errors.

This information is useful when doing compile testing to quickly
determine which boards are broken.

As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL.
Previously, each board had a corresponding $BOARD.ERR file, even if the
board compiled cleanly.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-24 00:37:41 +02:00
Wolfgang Denk
041a6a0c2e Merge branch 'master' of git://git.denx.de/u-boot-microblaze 2009-09-15 21:45:50 +02:00
Michal Simek
13916abf99 microblaze: Remove AtmarkTechno Suzaku board
Users should use microblaze-generic platform.
This platform is longer not supported.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-14 14:40:04 +02:00
Dirk Eibach
4c1883670a ppc4xx: Rename compactcenter to intip
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-11 10:37:47 +02:00
Wolfgang Denk
3ea43ff773 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-09-07 23:12:46 +02:00
Frederik Kriewitz
c35d7cf071 Add support for the DevKit8000 board
This patch adds support for the DevKit8000 board.

Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
2009-09-05 01:33:14 +02:00