This patch starts a bit PPC4xx header cleanup. First patch mostly touches PPC440 files. A later patch will touch the PPC405 files as well. This cleanup is done by creating header files for all SoC versions and moving the SoC specific defines into these special headers. This way the common header ppc405.h and ppc440.h can be cleaned up finally. Signed-off-by: Stefan Roese <sr@denx.de>
428 lines
11 KiB
C
428 lines
11 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/ppc440.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
ulong flash_get_size(ulong base, int banknum);
|
|
int misc_init_r_kbd(void);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 sdr0_pfc1, sdr0_pfc2;
|
|
u32 reg;
|
|
|
|
/* PLB Write pipelining disabled. Denali Core workaround */
|
|
mtdcr(PLB4A0_ACR, 0xDE000000);
|
|
mtdcr(PLB4A1_ACR, 0xDE000000);
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
|
|
mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
|
|
mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
|
|
mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
|
|
mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
/* Trace Pins are disabled. SDR0_PFC0 Register */
|
|
mtsdr(SDR0_PFC0, 0x0);
|
|
|
|
/* select Ethernet pins */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
/* SMII via ZMII */
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
|
SDR0_PFC1_SELECT_CONFIG_6;
|
|
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
|
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
|
SDR0_PFC2_SELECT_CONFIG_6;
|
|
|
|
/* enable SPI (SCP) */
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
|
|
|
|
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
mtsdr(SDR0_PFC4, 0x80000000);
|
|
|
|
/* PCI arbiter disabled */
|
|
/* PCI Host Configuration disbaled */
|
|
mfsdr(SDR0_PCI0, reg);
|
|
reg = 0;
|
|
mtsdr(SDR0_PCI0, 0x00000000 | reg);
|
|
|
|
gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
|
|
gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1);
|
|
|
|
reg = 0; /* reuse as counter */
|
|
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
|
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
|
|
& ~CONFIG_SYS_DSPIC_TEST_MASK);
|
|
while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
|
|
udelay(1000);
|
|
}
|
|
gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0);
|
|
if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
|
|
/* set "boot error" flag */
|
|
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
|
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
|
|
CONFIG_SYS_DSPIC_TEST_MASK);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Reset PHY's:
|
|
* The PHY's need a 2nd reset pulse, since the MDIO address is latched
|
|
* upon reset, and with the first reset upon powerup, the addresses are
|
|
* not latched reliable, since the IRQ line is multiplexed with an
|
|
* MDIO address. A 2nd reset at this time will make sure, that the
|
|
* correct address is latched.
|
|
*/
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
|
udelay(1000);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
|
|
udelay(1000);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| misc_init_r.
|
|
+---------------------------------------------------------------------------*/
|
|
int misc_init_r(void)
|
|
{
|
|
u32 pbcr;
|
|
int size_val = 0;
|
|
u32 reg;
|
|
unsigned long usb2d0cr = 0;
|
|
unsigned long usb2phy0cr, usb2h0cr = 0;
|
|
unsigned long sdr0_pfc1;
|
|
|
|
/*
|
|
* FLASH stuff...
|
|
*/
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
mfebc(PB0CR, pbcr);
|
|
switch (gd->bd->bi_flashsize) {
|
|
case 1 << 20:
|
|
size_val = 0;
|
|
break;
|
|
case 2 << 20:
|
|
size_val = 1;
|
|
break;
|
|
case 4 << 20:
|
|
size_val = 2;
|
|
break;
|
|
case 8 << 20:
|
|
size_val = 3;
|
|
break;
|
|
case 16 << 20:
|
|
size_val = 4;
|
|
break;
|
|
case 32 << 20:
|
|
size_val = 5;
|
|
break;
|
|
case 64 << 20:
|
|
size_val = 6;
|
|
break;
|
|
case 128 << 20:
|
|
size_val = 7;
|
|
break;
|
|
}
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtebc(PB0CR, pbcr);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size(gd->bd->bi_flashstart, 0);
|
|
|
|
/* Monitor protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
-CONFIG_SYS_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[1]);
|
|
|
|
/* Env protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[1]);
|
|
|
|
/*
|
|
* USB suff...
|
|
*/
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mfsdr(SDR0_USB0, usb2d0cr);
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
|
|
|
|
/* An 8-bit/60MHz interface is the only possible alternative
|
|
when connecting the Device to the PHY */
|
|
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
|
|
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mtsdr(SDR0_USB0, usb2d0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
/*
|
|
* Clear resets
|
|
*/
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Host(int phy) Device(ext phy)\n");
|
|
|
|
/*
|
|
* Clear PLB4A0_ACR[WRP]
|
|
* This fix will make the MAL burst disabling patch for the Linux
|
|
* EMAC driver obsolete.
|
|
*/
|
|
reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
|
|
mtdcr(PLB4A0_ACR, reg);
|
|
|
|
/*
|
|
* Init matrix keyboard
|
|
*/
|
|
misc_init_r_kbd();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: lwmon5");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
int val;
|
|
#if defined(CONFIG_WD_MAX_RATE)
|
|
unsigned long long ct = get_ticks();
|
|
|
|
/*
|
|
* Don't allow watch-dog triggering more frequently than
|
|
* the predefined value CONFIG_WD_MAX_RATE [ticks].
|
|
*/
|
|
if (ct >= gd->wdt_last) {
|
|
if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
|
|
return;
|
|
} else {
|
|
/* Time base counter had been reset */
|
|
if (((unsigned long long)(-1) - gd->wdt_last + ct) <
|
|
CONFIG_WD_MAX_RATE)
|
|
return;
|
|
}
|
|
gd->wdt_last = get_ticks();
|
|
#endif
|
|
|
|
/*
|
|
* Toggle watchdog output
|
|
*/
|
|
val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
|
|
gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
|
|
}
|
|
|
|
int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if ((strcmp(argv[1], "on") == 0))
|
|
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
|
|
else if ((strcmp(argv[1], "off") == 0))
|
|
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
|
|
else
|
|
return cmd_usage(cmdtp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
eepromwp, 2, 0, do_eeprom_wp,
|
|
"eeprom write protect off/on",
|
|
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
|
|
);
|
|
|
|
#if defined(CONFIG_VIDEO)
|
|
#include <video_fb.h>
|
|
#include <mb862xx.h>
|
|
|
|
extern GraphicDevice mb862xx;
|
|
|
|
static const gdc_regs init_regs [] =
|
|
{
|
|
{0x0100, 0x00000f00},
|
|
{0x0020, 0x801401df},
|
|
{0x0024, 0x00000000},
|
|
{0x0028, 0x00000000},
|
|
{0x002c, 0x00000000},
|
|
{0x0110, 0x00000000},
|
|
{0x0114, 0x00000000},
|
|
{0x0118, 0x01df0280},
|
|
{0x0004, 0x031f0000},
|
|
{0x0008, 0x027f027f},
|
|
{0x000c, 0x015f028f},
|
|
{0x0010, 0x020c0000},
|
|
{0x0014, 0x01df01ea},
|
|
{0x0018, 0x00000000},
|
|
{0x001c, 0x01e00280},
|
|
{0x0100, 0x80010f00},
|
|
{0x0, 0x0}
|
|
};
|
|
|
|
const gdc_regs *board_get_regs (void)
|
|
{
|
|
return init_regs;
|
|
}
|
|
|
|
/* Returns Lime base address */
|
|
unsigned int board_video_init (void)
|
|
{
|
|
/*
|
|
* Reset Lime controller
|
|
*/
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
|
|
udelay(500);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
|
|
|
|
mb862xx.winSizeX = 640;
|
|
mb862xx.winSizeY = 480;
|
|
mb862xx.gdfBytesPP = 2;
|
|
mb862xx.gdfIndex = GDF_15BIT_555RGB;
|
|
|
|
return CONFIG_SYS_LIME_BASE_0;
|
|
}
|
|
|
|
#define DEFAULT_BRIGHTNESS 0x64
|
|
|
|
static void board_backlight_brightness(int brightness)
|
|
{
|
|
if (brightness > 0) {
|
|
/* pwm duty, lamp on */
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
|
|
} else {
|
|
/* lamp off */
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
|
|
}
|
|
}
|
|
|
|
void board_backlight_switch (int flag)
|
|
{
|
|
char * param;
|
|
int rc;
|
|
|
|
if (flag) {
|
|
param = getenv("brightness");
|
|
rc = param ? simple_strtol(param, NULL, 10) : -1;
|
|
if (rc < 0)
|
|
rc = DEFAULT_BRIGHTNESS;
|
|
} else {
|
|
rc = 0;
|
|
}
|
|
board_backlight_brightness(rc);
|
|
}
|
|
|
|
#if defined(CONFIG_CONSOLE_EXTRA_INFO)
|
|
/*
|
|
* Return text to be printed besides the logo.
|
|
*/
|
|
void video_get_info_str (int line_number, char *info)
|
|
{
|
|
if (line_number == 1) {
|
|
strcpy (info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
|
|
} else {
|
|
info [0] = '\0';
|
|
}
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
void board_reset(void)
|
|
{
|
|
gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
|
|
}
|