u-boot/board/o2dnt/flash.c
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00

588 lines
15 KiB
C

/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* flash_real_protect() routine based on boards/alaska/flash.c
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
/* Intel-compatible flash commands */
#define INTEL_ERASE 0x20
#define INTEL_PROGRAM 0x40
#define INTEL_CLEAR 0x50
#define INTEL_LOCKBIT 0x60
#define INTEL_PROTECT 0x01
#define INTEL_STATUS 0x70
#define INTEL_READID 0x90
#define INTEL_READID 0x90
#define INTEL_SUSPEND 0xB0
#define INTEL_CONFIRM 0xD0
#define INTEL_RESET 0xFF
/* Intel-compatible flash status bits */
#define INTEL_FINISHED 0x80
#define INTEL_OK 0x80
typedef unsigned char FLASH_PORT_WIDTH;
typedef volatile unsigned char FLASH_PORT_WIDTHV;
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
#define FLASH_ID_MASK 0xFF
#define ORMASK(size) ((-size) & OR_AM_MSK)
#define FLASH_CYCLE1 0x0555
#define FLASH_CYCLE2 0x02aa
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(FPWV *addr, flash_info_t *info);
static void flash_reset(flash_info_t *info);
static flash_info_t *flash_get_info(ulong base);
static int write_data (flash_info_t *info, FPWV *dest, FPW data); /* O2D */
static void flash_sync_real_protect (flash_info_t * info);
static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
/*-----------------------------------------------------------------------
* flash_init()
*
* sets up flash_info and returns size of FLASH (bytes)
*/
unsigned long flash_init (void)
{
unsigned long size = 0;
int i;
extern void flash_preinit(void);
extern void flash_afterinit(ulong);
flash_preinit();
/* Init: no FLASHes known */
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
memset(&flash_info[i], 0, sizeof(flash_info_t));
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Query flash chip */
flash_info[0].size =
flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
size += flash_info[0].size;
/* get the h/w and s/w protection status in sync */
flash_sync_real_protect(&flash_info[0]);
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
flash_get_info(CONFIG_ENV_ADDR));
#endif
flash_afterinit(size);
return (size ? size : 1);
}
/*-----------------------------------------------------------------------
*/
static void flash_reset(flash_info_t *info)
{
FPWV *base = (FPWV *)(info->start[0]);
/* Put FLASH back in read mode */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
*base = (FPW) INTEL_RESET; /* Intel Read Mode */
}
/*-----------------------------------------------------------------------
*/
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t * info;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->size &&
info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
break;
}
return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
uchar *boottype;
uchar *bootletter;
char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
uchar topboottype[] = "top boot sector";
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
printf ("INTEL ");
break;
default:
printf ("Unknown Vendor ");
break;
}
/* check for top or bottom boot, if it applies */
if (info->flash_id & FLASH_BTYPE) {
boottype = botboottype;
bootletter = botbootletter;
} else {
boottype = topboottype;
bootletter = topbootletter;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F128J3A:
fmt = "28F128J3 (128 Mbit, uniform sectors)\n";
break;
default:
fmt = "Unknown Chip Type\n";
break;
}
printf (fmt, bootletter, boottype);
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20,
info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
}
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
ulong flash_get_size (FPWV *addr, flash_info_t *info)
{
int i;
/* Write auto select command: read Manufacturer ID */
/* Write auto select command sequence and test FLASH answer */
addr[FLASH_CYCLE1] = (FPW) INTEL_READID; /* selects Intel or AMD */
/* The manufacturer codes are only 1 byte, so just use 1 byte.
* This works for any bus width and any FLASH device width.
*/
udelay(100);
switch (addr[0] & 0xff) {
case (uchar)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
break;
}
/* Strataflash is configurable to 8/16bit Bus,
* but the Query-Structure is Word-orientated */
if (info->flash_id != FLASH_UNKNOWN) {
switch ((FPW)addr[2]) {
case (FPW)INTEL_ID_28F128J3:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
for( i = 0; i < info->sector_count; i++ )
info->start[i] = (ulong)addr + (i * 0x20000);
break; /* => Intel Strataflash 16MB */
default:
printf("Flash_id != %xd\n", (FPW)addr[2]);
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* => no or unknown flash */
}
}
/* Put FLASH back in read mode */
flash_reset(info);
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
FPWV *addr;
int flag, prot, sect;
ulong start, now, last;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F128J3A:
break;
case FLASH_UNKNOWN:
default:
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect)
if (info->protect[sect])
prot++;
if (prot)
printf ("- Warning: %d protected sectors will not be erased!",
prot);
printf ("\n");
last = get_timer(0);
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
if (info->protect[sect] != 0) /* protected, skip it */
continue;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr = (FPWV *)(info->start[sect]);
*addr = (FPW) INTEL_CLEAR; /* clear status register */
*addr = (FPW) INTEL_ERASE; /* erase setup */
*addr = (FPW) INTEL_CONFIRM; /* erase confirm */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer(0);
/* wait at least 80us for Intel - let's wait 1 ms */
udelay (1000);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) INTEL_SUSPEND;/* suspend erase */
flash_reset(info); /* reset to read mode */
rcode = 1; /* failed */
break;
}
/* show that we're waiting */
if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
putc ('.');
last = get_timer(0);
}
}
flash_reset(info); /* reset to read mode */
}
printf (" done\n");
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
int bytes; /* number of bytes to program in current word */
int left; /* number of bytes left to program */
int i, res;
for (left = cnt, res = 0;
left > 0 && res == 0;
addr += sizeof(data), left -= sizeof(data) - bytes) {
bytes = addr & (sizeof(data) - 1);
addr &= ~(sizeof(data) - 1);
/* combine source and destination data so can program
* an entire word of 16 or 32 bits */
for (i = 0; i < sizeof(data); i++) {
data <<= 8;
if (i < bytes || i - bytes >= left )
data += *((uchar *)addr + i);
else
data += *src++;
}
/* write one word to the flash */
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
res = write_data(info, (FPWV *)addr, data);
break;
default:
/* unknown flash type, error! */
printf ("missing or unknown FLASH type\n");
res = 1; /* not really a timeout, but gives error */
break;
}
}
return (res);
}
/*-----------------------------------------------------------------------
* Write a word or halfword to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_data (flash_info_t *info, FPWV *dest, FPW data)
{
FPWV *addr = dest;
ulong status;
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = (FPW) INTEL_PROGRAM; /* write setup */
*addr = data;
/* arm simple, non interrupt dependent timer */
start = get_timer(0);
/* wait while polling the status register */
while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
return (1);
}
}
*addr = (FPW) INTEL_RESET; /* restore read mode */
if (flag)
enable_interrupts();
return (0);
}
/*-----------------------------------------------------------------------
* Set/Clear sector's lock bit, returns:
* 0 - OK
* 1 - Error (timeout, voltage problems, etc.)
*/
int flash_real_protect (flash_info_t * info, long sector, int prot)
{
ulong start;
int i;
int rc = 0;
FPWV *addr = (FPWV *) (info->start[sector]);
int flag = disable_interrupts ();
*addr = INTEL_CLEAR; /* Clear status register */
if (prot) { /* Set sector lock bit */
*addr = INTEL_LOCKBIT; /* Sector lock bit */
*addr = INTEL_PROTECT; /* set */
} else { /* Clear sector lock bit */
*addr = INTEL_LOCKBIT; /* All sectors lock bits */
*addr = INTEL_CONFIRM; /* clear */
}
start = get_timer (0);
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
}
}
if (*addr != INTEL_OK) {
printf ("Flash lock bit operation failed at %08X, CSR=%08X\n",
(uint) addr, (uint) * addr);
rc = 1;
}
if (!rc)
info->protect[sector] = prot;
/*
* Clear lock bit command clears all sectors lock bits, so
* we have to restore lock bits of protected sectors.
*/
if (!prot) {
for (i = 0; i < info->sector_count; i++) {
if (info->protect[i]) {
start = get_timer (0);
addr = (FPWV *) (info->start[i]);
*addr = INTEL_LOCKBIT; /* Sector lock bit */
*addr = INTEL_PROTECT; /* set */
while ((*addr & INTEL_FINISHED) !=
INTEL_FINISHED) {
if (get_timer (start) >
CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
}
}
}
}
}
if (flag)
enable_interrupts ();
*addr = INTEL_RESET; /* Reset to read array mode */
return rc;
}
/*
* This function gets the u-boot flash sector protection status
* (flash_info_t.protect[]) in sync with the sector protection
* status stored in hardware.
*/
static void flash_sync_real_protect (flash_info_t * info)
{
int i;
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F128J3A:
for (i = 0; i < info->sector_count; ++i) {
info->protect[i] = intel_sector_protected(info, i);
}
break;
default:
/* no h/w protect support */
break;
}
}
/*
* checks if "sector" in bank "info" is protected. Should work on intel
* strata flash chips 28FxxxJ3x in 8-bit mode.
* Returns 1 if sector is protected (or timed-out while trying to read
* protection status), 0 if it is not.
*/
static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
{
FPWV *addr;
FPWV *lock_conf_addr;
ulong start;
unsigned char ret;
/*
* first, wait for the WSM to be finished. The rationale for
* waiting for the WSM to become idle for at most
* CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
* because of: (1) erase, (2) program or (3) lock bit
* configuration. So we just wait for the longest timeout of
* the (1)-(3), i.e. the erase timeout.
*/
/* wait at least 35ns (W12) before issuing Read Status Register */
udelay(1);
addr = (FPWV *) info->start[sector];
*addr = (FPW) INTEL_STATUS;
start = get_timer (0);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
printf("WSM busy too long, can't get prot status\n");
return 1;
}
}
/* issue the Read Identifier Codes command */
*addr = (FPW) INTEL_READID;
/* wait at least 35ns (W12) before reading */
udelay(1);
/* Intel example code uses offset of 4 for 8-bit flash */
lock_conf_addr = (FPWV *) info->start[sector] + 4;
ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
/* put flash back in read mode */
*addr = (FPW) INTEL_RESET;
return ret;
}