u-boot/drivers/sk98lin/u-boot_compat.h
wdenk 7152b1d0b3 * Add support for SK98xx driver
* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors
2003-09-05 23:19:14 +00:00

99 lines
2.4 KiB
C

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _UBOOT_COMPAT_H__
#define _UBOOT_COMPAT_H__
#include <pci.h>
#include <pci_ids.h>
#include <common.h>
#include <malloc.h>
#include <net.h>
#define __initdata
#define __init
#define __exit
#define netif_stop_queue(x)
#define netif_wake_queue(x)
#define netif_running(x) 0
#define unregister_netdev(x)
#define remove_proc_entry(x,y)
#define dev_addr enetaddr
#define spin_lock_irqsave(x,y) y = 0;
#define spin_lock_init(x)
#define spin_lock(x)
#define spin_unlock_irqrestore(x,y)
#define spin_unlock(x)
#define ENODEV 1
#define EAGAIN 2
#define EBUSY 3
#define HZ CFG_HZ
#define printk printf
#define KERN_ERR
#define KERN_WARNING
#define KERN_INFO
#define MOD_INC_USE_COUNT
#define MOD_DEC_USE_COUNT
#define kmalloc(x,y) malloc(x)
#define kfree(x) free(x)
#define GFP_ATOMIC 0
#define pci_alloc_consistent(x,y,z) (void *)(*(dma_addr_t *)(z) = (dma_addr_t)malloc(y))
#define pci_free_consistent(x,y,z,d) free(z)
#define pci_dma_sync_single(x,y,z,d)
#define pci_unmap_page(x,y,z,d)
#define pci_unmap_single(x,y,z,d)
#define pci_present() 1
struct sk_buff
{
u8 * data;
u32 len;
u8 * data_unaligned;
};
struct sk_buff * alloc_skb(u32 size, int dummy);
void dev_kfree_skb_any(struct sk_buff *skb);
void skb_reserve(struct sk_buff *skb, unsigned int len);
void skb_put(struct sk_buff *skb, unsigned int len);
#define dev_kfree_skb dev_kfree_skb_any
#define dev_kfree_skb_irq dev_kfree_skb_any
#define eth_copy_and_sum(dest,src,len,base) memcpy(dest->data,src,len);
#endif /* _UBOOT_COMPAT_H__ */