sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/drivers/net/fm
History
Shaohui Xie ae6b458306 driver/net/fm/memac_phy: set NEG bit for external MDIOs 
NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some
platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure
on XAUI PHY, so set this bit definitely to align with the RM.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
 		2014-11-14 11:12:13 -08:00
..
Makefile powerpc/85xx: add T4080 SoC support 2014-05-13 08:26:54 -07:00
b4860.c net/fman: add a fm_enable_port function 2013-10-24 09:35:59 -07:00
dtsec.c net: Merge asm/fsl_enet.h into fsl_mdio.h 2014-09-08 10:30:33 -07:00
eth.c net/fman: Add support for 10GEC3 and 10GEC4 2013-11-25 11:43:47 -08:00
fm.c QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR 2014-04-22 17:58:47 -07:00
fm.h net: Merge asm/fsl_enet.h into fsl_mdio.h 2014-09-08 10:30:33 -07:00
init.c net: Merge asm/fsl_enet.h into fsl_mdio.h 2014-09-08 10:30:33 -07:00
memac.c Fman/mEMAC: mEMAC fix for 10G MAC and PHY 2014-11-14 11:12:13 -08:00
memac_phy.c driver/net/fm/memac_phy: set NEG bit for external MDIOs 2014-11-14 11:12:13 -08:00
p1023.c net/fman: add a fm_enable_port function 2013-10-24 09:35:59 -07:00
p4080.c net/fman: add a fm_enable_port function 2013-10-24 09:35:59 -07:00
p5020.c net/fman: add a fm_enable_port function 2013-10-24 09:35:59 -07:00
p5040.c net/fman: add a fm_enable_port function 2013-10-24 09:35:59 -07:00
t1040.c board/t1040qds: Add sgmii ports support in 0xA7 protocol 2014-09-24 13:12:16 -07:00
t2080.c powerpc/t2080qds: some update for t2080qds 2014-01-21 13:37:41 -08:00
t4240.c powerpc/T4240QDS/eth: some fix for XFI 2014-08-20 10:44:16 -07:00
tgec.c net: Merge asm/fsl_enet.h into fsl_mdio.h 2014-09-08 10:30:33 -07:00
tgec_phy.c Change Andy Fleming's email address 2014-08-06 09:12:30 -04:00