u-boot/board/icecube/flash.c
Wolfgang Denk 09e4b0c5d3 Add support for Lite5200B board.
Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00

494 lines
12 KiB
C

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#ifndef CFG_FLASH_CFI_DRIVER
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
* has nothing to do with the flash chip being 8-bit or 16-bit.
*/
#ifdef CONFIG_FLASH_16BIT
typedef unsigned short FLASH_PORT_WIDTH;
typedef volatile unsigned short FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFFFF
#else
typedef unsigned char FLASH_PORT_WIDTH;
typedef volatile unsigned char FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFF
#endif
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
#define ORMASK(size) ((-size) & OR_AM_MSK)
#define FLASH_CYCLE1 0x0555
#define FLASH_CYCLE2 0x02aa
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(FPWV *addr, flash_info_t *info);
static void flash_reset(flash_info_t *info);
static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
static flash_info_t *flash_get_info(ulong base);
/*-----------------------------------------------------------------------
* flash_init()
*
* sets up flash_info and returns size of FLASH (bytes)
*/
unsigned long flash_init (void)
{
unsigned long size = 0;
int i;
extern void flash_preinit(void);
extern void flash_afterinit(ulong);
ulong flashbase = CFG_FLASH_BASE;
flash_preinit();
/* Init: no FLASHes known */
for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
memset(&flash_info[i], 0, sizeof(flash_info_t));
flash_info[i].size =
flash_get_size((FPW *)flashbase, &flash_info[i]);
size += flash_info[i].size;
flashbase += 0x800000;
}
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE+monitor_flash_len-1,
flash_get_info(CFG_MONITOR_BASE));
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR+CFG_ENV_SIZE-1,
flash_get_info(CFG_ENV_ADDR));
#endif
flash_afterinit(size);
return size ? size : 1;
}
/*-----------------------------------------------------------------------
*/
static void flash_reset(flash_info_t *info)
{
FPWV *base = (FPWV *)(info->start[0]);
/* Put FLASH back in read mode */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
*base = (FPW)0x00FF00FF; /* Intel Read Mode */
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
*base = (FPW)0x00F000F0; /* AMD Read Mode */
}
/*-----------------------------------------------------------------------
*/
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t * info;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->size &&
info->start[0] <= base && base <= info->start[0] + info->size - 1)
break;
}
return i == CFG_MAX_FLASH_BANKS ? 0 : info;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
uchar *boottype;
uchar *bootletter;
char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
uchar topboottype[] = "top boot sector";
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_STM: printf ("STM "); break;
case FLASH_MAN_INTEL: printf ("INTEL "); break;
default: printf ("Unknown Vendor "); break;
}
/* check for top or bottom boot, if it applies */
if (info->flash_id & FLASH_BTYPE) {
boottype = botboottype;
bootletter = botbootletter;
}
else {
boottype = topboottype;
bootletter = topbootletter;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AMDLV065D:
fmt = "29LV065 (64 Mbit, uniform sectors)\n";
break;
default:
fmt = "Unknown Chip Type\n";
break;
}
printf (fmt, bootletter, boottype);
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20,
info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0) {
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
}
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
ulong flash_get_size (FPWV *addr, flash_info_t *info)
{
int i;
FPWV* addr2;
/* Write auto select command: read Manufacturer ID */
/* Write auto select command sequence and test FLASH answer */
addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
/* The manufacturer codes are only 1 byte, so just use 1 byte.
* This works for any bus width and any FLASH device width.
*/
udelay(100);
switch (addr[0] & 0xff) {
case (uchar)AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case (uchar)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
break;
}
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
case (FPW)AMD_ID_LV065D:
info->flash_id += FLASH_AMDLV065D;
info->sector_count = 128;
info->size = 0x00800000;
for( i = 0; i < info->sector_count; i++ )
info->start[i] = (ulong)addr + (i * 0x10000);
break; /* => 8 or 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* => no or unknown flash */
}
/* test for real flash at bank 1 */
addr2 = (FPW *)((ulong)addr | 0x800000);
if (addr2 != addr &&
((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
/* Seems 2 banks are the same space (8Mb chip is installed,
* J24 in default position (CS0)). Disable this (first) bank.
*/
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
}
/* Put FLASH back in read mode */
flash_reset(info);
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
FPWV *addr;
int flag, prot, sect;
int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
ulong start, now, last;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AMDLV065D:
break;
case FLASH_UNKNOWN:
default:
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
last = get_timer(0);
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
if (info->protect[sect] != 0) /* protected, skip it */
continue;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr = (FPWV *)(info->start[sect]);
if (intel) {
*addr = (FPW)0x00500050; /* clear status register */
*addr = (FPW)0x00200020; /* erase setup */
*addr = (FPW)0x00D000D0; /* erase confirm */
}
else {
/* must be AMD style if not Intel */
FPWV *base; /* first address in bank */
base = (FPWV *)(info->start[0]);
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
*addr = (FPW)0x00300030; /* erase sector */
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer(0);
/* wait at least 50us for AMD, 80us for Intel.
* Let's wait 1 ms.
*/
udelay (1000);
while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
if (intel) {
/* suspend erase */
*addr = (FPW)0x00B000B0;
}
flash_reset(info); /* reset to read mode */
rcode = 1; /* failed */
break;
}
/* show that we're waiting */
if ((get_timer(last)) > CFG_HZ) {/* every second */
putc ('.');
last = get_timer(0);
}
}
/* show that we're waiting */
if ((get_timer(last)) > CFG_HZ) { /* every second */
putc ('.');
last = get_timer(0);
}
flash_reset(info); /* reset to read mode */
}
printf (" done\n");
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
int bytes; /* number of bytes to program in current word */
int left; /* number of bytes left to program */
int i, res;
for (left = cnt, res = 0;
left > 0 && res == 0;
addr += sizeof(data), left -= sizeof(data) - bytes) {
bytes = addr & (sizeof(data) - 1);
addr &= ~(sizeof(data) - 1);
/* combine source and destination data so can program
* an entire word of 16 or 32 bits
*/
for (i = 0; i < sizeof(data); i++) {
data <<= 8;
if (i < bytes || i - bytes >= left )
data += *((uchar *)addr + i);
else
data += *src++;
}
/* write one word to the flash */
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
res = write_word_amd(info, (FPWV *)addr, data);
break;
default:
/* unknown flash type, error! */
printf ("missing or unknown FLASH type\n");
res = 1; /* not really a timeout, but gives error */
break;
}
}
return (res);
}
/*-----------------------------------------------------------------------
* Write a word to Flash for AMD FLASH
* A word is 16 or 32 bits, whichever the bus width of the flash bank
* (not an individual chip) is.
*
* returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
{
ulong start;
int flag;
int res = 0; /* result, assume success */
FPWV *base; /* first address in flash bank */
/* Check if Flash is (sufficiently) erased */
if ((*dest & data) != data) {
return (2);
}
base = (FPWV *)(info->start[0]);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
*dest = data; /* start programming the data */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer (0);
/* data polling for D7 */
while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
*dest = (FPW)0x00F000F0; /* reset bank */
res = 1;
}
}
return (res);
}
#endif /*CFG_FLASH_CFI_DRIVER*/