u-boot/common/cmd_mdio.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

271 lines
5.4 KiB
C

/*
* (C) Copyright 2011 Freescale Semiconductor, Inc
* Andy Fleming
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* MDIO Commands
*/
#include <common.h>
#include <command.h>
#include <miiphy.h>
#include <phy.h>
static char last_op[2];
static uint last_data;
static uint last_addr_lo;
static uint last_addr_hi;
static uint last_devad_lo;
static uint last_devad_hi;
static uint last_reg_lo;
static uint last_reg_hi;
static int extract_range(char *input, int *plo, int *phi)
{
char *end;
*plo = simple_strtol(input, &end, 0);
if (end == input)
return -1;
if ((*end == '-') && *(++end))
*phi = simple_strtol(end, NULL, 0);
else if (*end == '\0')
*phi = *plo;
else
return -1;
return 0;
}
static int mdio_write_ranges(struct mii_dev *bus, int addrlo,
int addrhi, int devadlo, int devadhi,
int reglo, int reghi, unsigned short data)
{
int addr, devad, reg;
int err = 0;
for (addr = addrlo; addr <= addrhi; addr++) {
for (devad = devadlo; devad <= devadhi; devad++) {
for (reg = reglo; reg <= reghi; reg++) {
err = bus->write(bus, addr, devad, reg, data);
if (err)
goto err_out;
}
}
}
err_out:
return err;
}
static int mdio_read_ranges(struct mii_dev *bus, int addrlo,
int addrhi, int devadlo, int devadhi,
int reglo, int reghi)
{
int addr, devad, reg;
printf("Reading from bus %s\n", bus->name);
for (addr = addrlo; addr <= addrhi; addr++) {
printf("PHY at address %d:\n", addr);
for (devad = devadlo; devad <= devadhi; devad++) {
for (reg = reglo; reg <= reghi; reg++) {
int val;
val = bus->read(bus, addr, devad, reg);
if (val < 0) {
printf("Error\n");
return val;
}
if (devad >= 0)
printf("%d.", devad);
printf("%d - 0x%x\n", reg, val & 0xffff);
}
}
}
return 0;
}
/* The register will be in the form [a[-b].]x[-y] */
static int extract_reg_range(char *input, int *devadlo, int *devadhi,
int *reglo, int *reghi)
{
char *regstr;
/* use strrchr to find the last string after a '.' */
regstr = strrchr(input, '.');
/* If it exists, extract the devad(s) */
if (regstr) {
char devadstr[32];
strncpy(devadstr, input, regstr - input);
devadstr[regstr - input] = '\0';
if (extract_range(devadstr, devadlo, devadhi))
return -1;
regstr++;
} else {
/* Otherwise, we have no devad, and we just got regs */
*devadlo = *devadhi = MDIO_DEVAD_NONE;
regstr = input;
}
return extract_range(regstr, reglo, reghi);
}
static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
int *addrlo, int *addrhi)
{
struct phy_device *phydev;
if ((argc < 1) || (argc > 2))
return -1;
/* If there are two arguments, it's busname addr */
if (argc == 2) {
*bus = miiphy_get_dev_by_name(argv[0]);
if (!*bus)
return -1;
return extract_range(argv[1], addrlo, addrhi);
}
/* It must be one argument, here */
/*
* This argument can be one of two things:
* 1) Ethernet device name
* 2) Just an address (use the previously-used bus)
*
* We check all buses for a PHY which is connected to an ethernet
* device by the given name. If none are found, we call
* extract_range() on the string, and see if it's an address range.
*/
phydev = mdio_phydev_for_ethname(argv[0]);
if (phydev) {
*addrlo = *addrhi = phydev->addr;
*bus = phydev->bus;
return 0;
}
/* It's an address or nothing useful */
return extract_range(argv[0], addrlo, addrhi);
}
/* ---------------------------------------------------------------- */
static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char op[2];
int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
unsigned short data;
int pos = argc - 1;
struct mii_dev *bus;
if (argc < 2)
return CMD_RET_USAGE;
/*
* We use the last specified parameters, unless new ones are
* entered.
*/
op[0] = argv[1][0];
addrlo = last_addr_lo;
addrhi = last_addr_hi;
devadlo = last_devad_lo;
devadhi = last_devad_hi;
reglo = last_reg_lo;
reghi = last_reg_hi;
data = last_data;
bus = mdio_get_current_dev();
if (flag & CMD_FLAG_REPEAT)
op[0] = last_op[0];
switch (op[0]) {
case 'w':
if (pos > 1)
data = simple_strtoul(argv[pos--], NULL, 16);
case 'r':
if (pos > 1)
if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
&reglo, &reghi))
return -1;
default:
if (pos > 1)
if (extract_phy_range(&(argv[2]), pos - 1, &bus,
&addrlo, &addrhi))
return -1;
break;
}
if (op[0] == 'l') {
mdio_list_devices();
return 0;
}
/* Save the chosen bus */
miiphy_set_current_dev(bus->name);
switch (op[0]) {
case 'w':
mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
reglo, reghi, data);
break;
case 'r':
mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
reglo, reghi);
break;
}
/*
* Save the parameters for repeats.
*/
last_op[0] = op[0];
last_addr_lo = addrlo;
last_addr_hi = addrhi;
last_devad_lo = devadlo;
last_devad_hi = devadhi;
last_reg_lo = reglo;
last_reg_hi = reghi;
last_data = data;
return 0;
}
/***************************************************/
U_BOOT_CMD(
mdio, 6, 1, do_mdio,
"MDIO utility commands",
"list - List MDIO buses\n"
"mdio read <phydev> [<devad>.]<reg> - "
"read PHY's register at <devad>.<reg>\n"
"mdio write <phydev> [<devad>.]<reg> <data> - "
"write PHY's register at <devad>.<reg>\n"
"<phydev> may be:\n"
" <busname> <addr>\n"
" <addr>\n"
" <eth name>\n"
"<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
);