u-boot/drivers/bcm570x_lm.h
wdenk 8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00

452 lines
20 KiB
C

/******************************************************************************/
/* */
/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
/* Corporation. */
/* All rights reserved. */
/* */
/* This program is free software; you can redistribute it and/or modify */
/* it under the terms of the GNU General Public License as published by */
/* the Free Software Foundation, located in the file LICENSE. */
/* */
/* History: */
/* 02/25/00 Hav Khauv Initial version. */
/******************************************************************************/
#ifndef LM_H
#define LM_H
#include "bcm570x_queue.h"
#include "bcm570x_bits.h"
/******************************************************************************/
/* Basic types. */
/******************************************************************************/
typedef char LM_CHAR, *PLM_CHAR;
typedef unsigned int LM_UINT, *PLM_UINT;
typedef unsigned char LM_UINT8, *PLM_UINT8;
typedef unsigned short LM_UINT16, *PLM_UINT16;
typedef unsigned int LM_UINT32, *PLM_UINT32;
typedef unsigned int LM_COUNTER, *PLM_COUNTER;
typedef void LM_VOID, *PLM_VOID;
typedef char LM_BOOL, *PLM_BOOL;
/* 64bit value. */
typedef struct {
#ifdef BIG_ENDIAN_HOST
LM_UINT32 High;
LM_UINT32 Low;
#else /* BIG_ENDIAN_HOST */
LM_UINT32 Low;
LM_UINT32 High;
#endif /* !BIG_ENDIAN_HOST */
} LM_UINT64, *PLM_UINT64;
typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \
{ \
LM_UINT32 OrgLow; \
\
OrgLow = (pAddr)->Low; \
(pAddr)->Low += IncSize; \
if((pAddr)->Low < OrgLow) { \
(pAddr)->High++; /* Wrap around. */ \
} \
}
#ifndef NULL
#define NULL ((void *) 0)
#endif /* NULL */
#ifndef OFFSETOF
#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m)))
#endif /* OFFSETOF */
/******************************************************************************/
/* Simple macros. */
/******************************************************************************/
#define IS_ETH_BROADCAST(_pEthAddr) \
(((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
#define IS_ETH_MULTICAST(_pEthAddr) \
(((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \
((((unsigned char *) (_pEtherAddr1))[0] == \
((unsigned char *) (_pEtherAddr2))[0]) && \
(((unsigned char *) (_pEtherAddr1))[1] == \
((unsigned char *) (_pEtherAddr2))[1]) && \
(((unsigned char *) (_pEtherAddr1))[2] == \
((unsigned char *) (_pEtherAddr2))[2]) && \
(((unsigned char *) (_pEtherAddr1))[3] == \
((unsigned char *) (_pEtherAddr2))[3]) && \
(((unsigned char *) (_pEtherAddr1))[4] == \
((unsigned char *) (_pEtherAddr2))[4]) && \
(((unsigned char *) (_pEtherAddr1))[5] == \
((unsigned char *) (_pEtherAddr2))[5]))
#define COPY_ETH_ADDRESS(_Src, _Dst) \
((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \
((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \
((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \
((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \
((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \
((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
/******************************************************************************/
/* Constants. */
/******************************************************************************/
#define ETHERNET_ADDRESS_SIZE 6
#define ETHERNET_PACKET_HEADER_SIZE 14
#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */
#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */
#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */
#ifndef LM_MAX_MC_TABLE_SIZE
#define LM_MAX_MC_TABLE_SIZE 32
#endif /* LM_MAX_MC_TABLE_SIZE */
#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1)
#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1)
/* Receive filter masks. */
#define LM_ACCEPT_UNICAST 0x0001
#define LM_ACCEPT_MULTICAST 0x0002
#define LM_ACCEPT_ALL_MULTICAST 0x0004
#define LM_ACCEPT_BROADCAST 0x0008
#define LM_ACCEPT_ERROR_PACKET 0x0010
#define LM_PROMISCUOUS_MODE 0x10000
/******************************************************************************/
/* PCI registers. */
/******************************************************************************/
#define PCI_VENDOR_ID_REG 0x00
#define PCI_DEVICE_ID_REG 0x02
#define PCI_COMMAND_REG 0x04
#define PCI_IO_SPACE_ENABLE 0x0001
#define PCI_MEM_SPACE_ENABLE 0x0002
#define PCI_BUSMASTER_ENABLE 0x0004
#define PCI_MEMORY_WRITE_INVALIDATE 0x0010
#define PCI_PARITY_ERROR_ENABLE 0x0040
#define PCI_SYSTEM_ERROR_ENABLE 0x0100
#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200
#define PCI_STATUS_REG 0x06
#define PCI_REV_ID_REG 0x08
#define PCI_CACHE_LINE_SIZE_REG 0x0c
#define PCI_IO_BASE_ADDR_REG 0x10
#define PCI_IO_BASE_ADDR_MASK 0xfffffff0
#define PCI_MEM_BASE_ADDR_LOW 0x10
#define PCI_MEM_BASE_ADDR_HIGH 0x14
#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c
#define PCI_SUBSYSTEM_ID_REG 0x2e
#define PCI_INT_LINE_REG 0x3c
#define PCIX_CAP_REG 0x40
#define PCIX_ENABLE_RELAXED_ORDERING BIT_17
/******************************************************************************/
/* Fragment structure. */
/******************************************************************************/
typedef struct {
LM_UINT32 FragSize;
LM_PHYSICAL_ADDRESS FragBuf;
} LM_FRAG, *PLM_FRAG;
typedef struct {
/* FragCount is initialized for the caller to the maximum array size, on */
/* return FragCount is the number of the actual fragments in the array. */
LM_UINT32 FragCount;
/* Total buffer size. */
LM_UINT32 TotalSize;
/* Fragment array buffer. */
LM_FRAG Fragments[1];
} LM_FRAG_LIST, *PLM_FRAG_LIST;
#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
typedef struct { \
LM_FRAG_LIST FragList; \
LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \
} _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
/******************************************************************************/
/* Status codes. */
/******************************************************************************/
#define LM_STATUS_SUCCESS 0
#define LM_STATUS_FAILURE 1
#define LM_STATUS_INTERRUPT_ACTIVE 2
#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3
#define LM_STATUS_LINK_ACTIVE 4
#define LM_STATUS_LINK_DOWN 5
#define LM_STATUS_LINK_SETTING_MISMATCH 6
#define LM_STATUS_TOO_MANY_FRAGMENTS 7
#define LM_STATUS_TRANSMIT_ABORTED 8
#define LM_STATUS_TRANSMIT_ERROR 9
#define LM_STATUS_RECEIVE_ABORTED 10
#define LM_STATUS_RECEIVE_ERROR 11
#define LM_STATUS_INVALID_PACKET_SIZE 12
#define LM_STATUS_OUT_OF_MAP_REGISTERS 13
#define LM_STATUS_UNKNOWN_ADAPTER 14
typedef LM_UINT LM_STATUS, *PLM_STATUS;
/******************************************************************************/
/* Requested media type. */
/******************************************************************************/
#define LM_REQUESTED_MEDIA_TYPE_AUTO 0
#define LM_REQUESTED_MEDIA_TYPE_BNC 1
#define LM_REQUESTED_MEDIA_TYPE_UTP_AUTO 2
#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS 3
#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX 4
#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS 5
#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX 6
#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS 7
#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX 8
#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS 9
#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX 10
#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS 11
#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX 12
#define LM_REQUESTED_MEDIA_TYPE_MAC_LOOPBACK 0xfffe
#define LM_REQUESTED_MEDIA_TYPE_PHY_LOOPBACK 0xffff
typedef LM_UINT32 LM_REQUESTED_MEDIA_TYPE, *PLM_REQUESTED_MEDIA_TYPE;
/******************************************************************************/
/* Media type. */
/******************************************************************************/
#define LM_MEDIA_TYPE_UNKNOWN -1
#define LM_MEDIA_TYPE_AUTO 0
#define LM_MEDIA_TYPE_UTP 1
#define LM_MEDIA_TYPE_BNC 2
#define LM_MEDIA_TYPE_AUI 3
#define LM_MEDIA_TYPE_FIBER 4
typedef LM_UINT32 LM_MEDIA_TYPE, *PLM_MEDIA_TYPE;
/******************************************************************************/
/* Line speed. */
/******************************************************************************/
#define LM_LINE_SPEED_UNKNOWN 0
#define LM_LINE_SPEED_10MBPS 1
#define LM_LINE_SPEED_100MBPS 2
#define LM_LINE_SPEED_1000MBPS 3
typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
/******************************************************************************/
/* Duplex mode. */
/******************************************************************************/
#define LM_DUPLEX_MODE_UNKNOWN 0
#define LM_DUPLEX_MODE_HALF 1
#define LM_DUPLEX_MODE_FULL 2
typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
/******************************************************************************/
/* Power state. */
/******************************************************************************/
#define LM_POWER_STATE_D0 0
#define LM_POWER_STATE_D1 1
#define LM_POWER_STATE_D2 2
#define LM_POWER_STATE_D3 3
typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
/******************************************************************************/
/* Task offloading. */
/******************************************************************************/
#define LM_TASK_OFFLOAD_NONE 0x0000
#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001
#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002
#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004
#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008
#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010
#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020
#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040
typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
/******************************************************************************/
/* Flow control. */
/******************************************************************************/
#define LM_FLOW_CONTROL_NONE 0x00
#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01
#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02
#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
LM_FLOW_CONTROL_TRANSMIT_PAUSE)
/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */
/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
/* bits are set, then flow control is enabled regardless of link partner's */
/* flow control capability. */
#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000
typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
/******************************************************************************/
/* Wake up mode. */
/******************************************************************************/
#define LM_WAKE_UP_MODE_NONE 0
#define LM_WAKE_UP_MODE_MAGIC_PACKET 1
#define LM_WAKE_UP_MODE_NWUF 2
#define LM_WAKE_UP_MODE_LINK_CHANGE 4
typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
/******************************************************************************/
/* Counters. */
/******************************************************************************/
#define LM_COUNTER_FRAMES_XMITTED_OK 0
#define LM_COUNTER_FRAMES_RECEIVED_OK 1
#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2
#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3
#define LM_COUNTER_RCV_CRC_ERROR 4
#define LM_COUNTER_ALIGNMENT_ERROR 5
#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6
#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7
#define LM_COUNTER_FRAMES_DEFERRED 8
#define LM_COUNTER_MAX_COLLISIONS 9
#define LM_COUNTER_RCV_OVERRUN 10
#define LM_COUNTER_XMIT_UNDERRUN 11
#define LM_COUNTER_UNICAST_FRAMES_XMIT 12
#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13
#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14
#define LM_COUNTER_UNICAST_FRAMES_RCV 15
#define LM_COUNTER_MULTICAST_FRAMES_RCV 16
#define LM_COUNTER_BROADCAST_FRAMES_RCV 17
typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
/******************************************************************************/
/* Forward definition. */
/******************************************************************************/
typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
typedef struct _LM_PACKET *PLM_PACKET;
/******************************************************************************/
/* Function prototypes. */
/******************************************************************************/
LM_STATUS LM_GetAdapterInfo(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_InitializeAdapter(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_ResetAdapter(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_DisableInterrupt(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_EnableInterrupt(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
LM_STATUS LM_ServiceInterrupts(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_QueueRxPackets(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_SetReceiveMask(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
LM_STATUS LM_Halt(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_Abort(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_MulticastAdd(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
LM_STATUS LM_MulticastDel(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
LM_STATUS LM_MulticastClear(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_SetMacAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress);
LM_STATUS LM_LoopbackAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
LM_UINT32 LM_GetCrcCounter(PLM_DEVICE_BLOCK pDevice);
LM_WAKE_UP_MODE LM_PMCapabilities(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_NwufAdd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
LM_STATUS LM_NwufRemove(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
LM_STATUS LM_SetPowerState(PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel);
LM_VOID LM_ReadPhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
PLM_UINT32 pData32);
LM_VOID LM_WritePhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
LM_UINT32 Data32);
LM_STATUS LM_ControlLoopBack(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Control);
LM_STATUS LM_SetupPhy(PLM_DEVICE_BLOCK pDevice);
int LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
/******************************************************************************/
/* These are the OS specific functions called by LMAC. */
/******************************************************************************/
LM_STATUS MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
LM_UINT16 *pValue16);
LM_STATUS MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
LM_UINT16 Value16);
LM_STATUS MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
LM_UINT32 *pValue32);
LM_STATUS MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
LM_UINT32 Value32);
LM_STATUS MM_MapMemBase(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_MapIoBase(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
LM_STATUS MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
LM_STATUS MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
PLM_VOID *pMemoryBlockVirt);
LM_STATUS MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
PLM_VOID *pMemoryBlockVirt, PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
LM_BOOL Cached);
LM_STATUS MM_GetConfig(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
LM_STATUS MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice);
LM_STATUS MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
LM_STATUS MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
LM_STATUS LM_MbufWorkAround(PLM_DEVICE_BLOCK pDevice);
LM_STATUS LM_SetLinkSpeed(PLM_DEVICE_BLOCK pDevice,
LM_REQUESTED_MEDIA_TYPE RequestedMediaType);
#if INCLUDE_5703_A0_FIX
LM_STATUS LM_Load5703DmaWFirmware(PLM_DEVICE_BLOCK pDevice);
#endif
#endif /* LM_H */