u-boot/drivers/netarm_eth.c
wdenk cd0a9de68b * Patch by Laurent Mohin, 10 Feb 2004:
Fix buffer overflow in common/usb.c

* Patch by Tolunay Orkun, 10 Feb 2004:
  Add support for Cogent CSB272 board

* Code cleanup
2004-02-23 20:48:38 +00:00

361 lines
8.8 KiB
C

/*
* Copyright (C) 2004 IMMS gGmbH <www.imms.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* author(s): Thomas Elste, <info@elste.org>
* (some parts derived from uCLinux Netarm Ethernet Driver)
*/
#include <common.h>
#ifdef CONFIG_DRIVER_NETARMETH
#include <command.h>
#include <net.h>
#include "netarm_eth.h"
#include <asm/arch/netarm_registers.h>
#if (CONFIG_COMMANDS & CFG_CMD_NET)
static int na_mii_poll_busy (void);
static void na_get_mac_addr (void)
{
unsigned short p[3];
char *m_addr;
char ethaddr[20];
m_addr = (char *) p;
p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
m_addr[0], m_addr[1],
m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
printf ("HW-MAC Address: %s\n", ethaddr);
/* set env, todo: check if already an adress is set */
setenv ("ethaddr", ethaddr);
}
static void na_mii_write (int reg, int value)
{
int mii_addr;
/* Select register */
mii_addr = CFG_ETH_PHY_ADDR + reg;
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
/* Write value */
SET_EADDR (NETARM_ETH_MII_WRITE, value);
na_mii_poll_busy ();
}
static unsigned int na_mii_read (int reg)
{
int mii_addr, val;
/* Select register */
mii_addr = CFG_ETH_PHY_ADDR + reg;
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
/* do one management cycle */
SET_EADDR (NETARM_ETH_MII_CMD,
GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
na_mii_poll_busy ();
/* Return read value */
val = GET_EADDR (NETARM_ETH_MII_READ);
return val;
}
static int na_mii_poll_busy (void)
{
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) {
if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
return 1;
}
}
printf ("na_mii_busy timeout\n");
return (0);
}
static int na_mii_identify_phy (void)
{
int id_reg_a = 0;
/* get phy id register */
id_reg_a = na_mii_read (MII_PHY_ID);
if (id_reg_a == 0x0043) {
/* This must be an Enable or a Lucent LU3X31 PHY chip */
return 1;
} else if (id_reg_a == 0x0013) {
/* it is an Intel LXT971A */
return 1;
}
return (0);
}
static int na_mii_negotiate (void)
{
int i = 0;
/* Enable auto-negotiation */
na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
/* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
/* Restart auto-negotiation */
na_mii_write (MII_PHY_CONTROL, 0x1200);
/* status register is 0xffff after setting the autoneg restart bit */
while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
i++;
}
/* na_mii_read uses the timer already, so we can't use it again for
timeout checking.
Instead we just try some times.
*/
for (i = 0; i < 40000; i++) {
if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
return 0;
}
}
/*
printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
*/
return (1);
}
static unsigned int na_mii_check_speed (void)
{
unsigned int status;
/* Read Status register */
status = na_mii_read (MII_PHY_STATUS);
/* Check link status. If 0, default to 100 Mbps. */
if ((status & 0x0004) == 0) {
printf ("*Warning* no link detected, set default speed to 100Mbs\n");
return 1;
} else {
if ((na_mii_read (17) & 0x4000) != 0) {
printf ("100Mbs link detected\n");
return 1;
} else {
printf ("10Mbs link detected\n");
return 0;
}
}
return 0;
}
static int reset_eth (void)
{
int pt;
na_get_mac_addr ();
pt = na_mii_identify_phy ();
/* reset the phy */
na_mii_write (MII_PHY_CONTROL, 0x8000);
reset_timer_masked ();
while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) {
if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
break;
}
}
if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY)
printf ("phy reset timeout\n");
/* set the PCS reg */
SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
na_mii_negotiate ();
na_mii_check_speed ();
/* Delay 10 millisecond. (Maybe this should be 1 second.) */
udelay (10000);
/* Turn receive on.
Enable statistics register autozero on read.
Do not insert MAC address on transmit.
Do not enable special test modes. */
SET_EADDR (NETARM_ETH_STL_CFG,
(NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
/* Set the inter-packet gap delay to 0.96us for MII.
The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
/* Add CRC to end of packets.
Pad packets to minimum length of 64 bytes.
Allow unlimited length transmit packets.
Receive all broadcast packets.
NOTE: Multicast addressing is NOT enabled here currently. */
SET_EADDR (NETARM_ETH_MAC_CFG,
(NETARM_ETH_MACC_CRCEN |
NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
/* enable fifos */
SET_EADDR (NETARM_ETH_GEN_CTRL,
(NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
return (0);
}
extern int eth_init (bd_t * bd)
{
reset_eth ();
return 0;
}
extern void eth_halt (void)
{
SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
}
/* Get a data block via Ethernet */
extern int eth_rx (void)
{
int i;
unsigned short rxlen;
unsigned int *addr;
unsigned int rxstatus, lastrxlen;
char *pa;
/* RXBR is 1, data block was received */
if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
return 0;
/* get status register and the length of received block */
rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
if (rxlen == 0)
return 0;
/* clear RXBR to make fifo available */
SET_EADDR (NETARM_ETH_GEN_STAT,
GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
/* clear TXBC to make fifo available */
/* According to NETARM50 data manual you just have to clear
RXBR but that has no effect. Only after clearing TXBC the
Fifo becomes readable. */
SET_EADDR (NETARM_ETH_GEN_STAT,
GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
addr = (unsigned int *) NetRxPackets[0];
pa = (char *) NetRxPackets[0];
/* read the fifo */
for (i = 0; i < rxlen / 4; i++) {
*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
addr++;
}
if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
/* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
lastrxlen =
(GET_EADDR (NETARM_ETH_GEN_STAT) &
NETARM_ETH_GST_RXFDB) >> 28;
*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
switch (lastrxlen) {
case 1:
*addr &= 0xff000000;
break;
case 2:
*addr &= 0xffff0000;
break;
case 3:
*addr &= 0xffffff00;
break;
}
}
/* Pass the packet up to the protocol layers. */
NetReceive (NetRxPackets[0], rxlen);
return rxlen;
}
/* Send a data block via Ethernet. */
extern int eth_send (volatile void *packet, int length)
{
int i, length32;
char *pa;
unsigned int *pa32, lastp = 0, rest;
pa = (char *) packet;
pa32 = (unsigned int *) packet;
length32 = length / 4;
rest = length % 4;
/* make sure there's no garbage in the last word */
switch (rest) {
case 0:
lastp = pa32[length32];
length32--;
break;
case 1:
lastp = pa32[length32] & 0x000000ff;
break;
case 2:
lastp = pa32[length32] & 0x0000ffff;
break;
case 3:
lastp = pa32[length32] & 0x00ffffff;
break;
}
/* write to the fifo */
for (i = 0; i < length32; i++)
SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
/* the last word is written to an extra register, this
starts the transmission */
SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
/* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
went fine. But we can't use the timer for a timeout loop because
of it is used already in upper layers. So we just try some times. */
i = 0;
while (i < 50000) {
if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
== NETARM_ETH_TXSTAT_TXOK)
return 0;
i++;
}
printf ("eth_send timeout\n");
return 1;
}
#endif /* COMMANDS & CFG_NET */
#endif /* CONFIG_DRIVER_NETARMETH */