u-boot/drivers/serial_pl010.c
wdenk 6705d81e90 * Patch by Andreas Engel, 12 Jul 2004:
Replaced hardcoded PL011 clock frequency with config variable.
  Fixed wrong CONFIG_CMD_DFL doc.

* Patch by Thomas Viehweger, 09 Jun 2004:
  make it possible to remove chpart when there is only one partition
2004-08-02 23:22:59 +00:00

172 lines
3.7 KiB
C

/*
* (C) Copyright 2000
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */
/* Should be fairly simple to make it work with the PL010 as well */
#include <common.h>
#ifdef CFG_PL010_SERIAL
#include "serial_pl011.h"
#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
#define IO_READ(addr) (*(volatile unsigned int *)(addr))
/* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */
#define CONSOLE_PORT CONFIG_CONS_INDEX
#define baudRate CONFIG_BAUDRATE
static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
static void pl010_putc (int portnum, char c);
static int pl010_getc (int portnum);
static int pl010_tstc (int portnum);
int serial_init (void)
{
unsigned int divisor;
/*
** First, disable everything.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
/*
** Set baud rate
**
*/
switch (baudRate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
divisor = UART_PL010_BAUD_9600;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
break;
case 57600:
divisor = UART_PL010_BAUD_57600;
break;
case 115200:
divisor = UART_PL010_BAUD_115200;
break;
default:
divisor = UART_PL010_BAUD_38400;
}
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM,
((divisor & 0xf00) >> 8));
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
/*
** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH,
(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
/*
** Finally, enable the UART
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
return (0);
}
void serial_putc (const char c)
{
if (c == '\n')
pl010_putc (CONSOLE_PORT, '\r');
pl010_putc (CONSOLE_PORT, c);
}
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int serial_getc (void)
{
return pl010_getc (CONSOLE_PORT);
}
int serial_tstc (void)
{
return pl010_tstc (CONSOLE_PORT);
}
void serial_setbrg (void)
{
}
static void pl010_putc (int portnum, char c)
{
/* Wait until there is space in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
/* Send the character */
IO_WRITE (port[portnum] + UART_PL01x_DR, c);
}
static int pl010_getc (int portnum)
{
unsigned int data;
/* Wait until there is data in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
data = IO_READ (port[portnum] + UART_PL01x_DR);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
return -1;
}
return (int) data;
}
static int pl010_tstc (int portnum)
{
return !(IO_READ (port[portnum] + UART_PL01x_FR) &
UART_PL01x_FR_RXFE);
}
#endif