u-boot/board/teejet/mt_ventoux/mt_ventoux.c
Paul Kocialkowski 679f82c349 omap-common: Common function to display die id, replacing omap3-specific version
This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:30 -04:00

344 lines
7.2 KiB
C

/*
* Copyright (C) 2011
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* Copyright (C) 2009 TechNexion Ltd.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <malloc.h>
#include <fpga.h>
#include <video_fb.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/dss.h>
#include <asm/arch/clock.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
#ifdef CONFIG_USB_EHCI
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
#include "mt_ventoux.h"
DECLARE_GLOBAL_DATA_PTR;
#define BUZZER 140
#define SPEAKER 141
#define USB1_PWR 127
#define USB2_PWR 149
#ifndef CONFIG_FPGA
#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
#endif
#define FPGA_RESET 62
#define FPGA_PROG 116
#define FPGA_CCLK 117
#define FPGA_DIN 118
#define FPGA_INIT 119
#define FPGA_DONE 154
#define LCD_PWR 138
#define LCD_PON_PIN 139
#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
static struct {
u32 xres;
u32 yres;
} panel_resolution[] = {
{ 480, 272 },
{ 800, 480 }
};
static struct panel_config lcd_cfg[] = {
{
.timing_h = PANEL_TIMING_H(40, 5, 2),
.timing_v = PANEL_TIMING_V(8, 8, 2),
.pol_freq = 0x00003000, /* Pol Freq */
.divisor = 0x00010033, /* 9 Mhz Pixel Clock */
.panel_type = 0x01, /* TFT */
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
.panel_color = 0,
.gfx_format = GFXFORMAT_RGB24_UNPACKED,
},
{
.timing_h = PANEL_TIMING_H(20, 192, 4),
.timing_v = PANEL_TIMING_V(2, 20, 10),
.pol_freq = 0x00004000, /* Pol Freq */
.divisor = 0x0001000E, /* 36Mhz Pixel Clock */
.panel_type = 0x01, /* TFT */
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
.panel_color = 0,
.gfx_format = GFXFORMAT_RGB24_UNPACKED,
}
};
#endif
/* Timing definitions for FPGA */
static const u32 gpmc_fpga[] = {
FPGA_GPMC_CONFIG1,
FPGA_GPMC_CONFIG2,
FPGA_GPMC_CONFIG3,
FPGA_GPMC_CONFIG4,
FPGA_GPMC_CONFIG5,
FPGA_GPMC_CONFIG6,
};
#ifdef CONFIG_USB_EHCI
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
};
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
}
int ehci_hcd_stop(int index)
{
return omap_ehci_hcd_stop();
}
#endif
static inline void fpga_reset(int nassert)
{
gpio_set_value(FPGA_RESET, !nassert);
}
int fpga_pgm_fn(int nassert, int nflush, int cookie)
{
debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
gpio_set_value(FPGA_PROG, !nassert);
return nassert;
}
int fpga_init_fn(int cookie)
{
return !gpio_get_value(FPGA_INIT);
}
int fpga_done_fn(int cookie)
{
return gpio_get_value(FPGA_DONE);
}
int fpga_pre_config_fn(int cookie)
{
debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
/* Setting GPIOs for programming Mode */
gpio_request(FPGA_RESET, "FPGA_RESET");
gpio_direction_output(FPGA_RESET, 1);
gpio_request(FPGA_PROG, "FPGA_PROG");
gpio_direction_output(FPGA_PROG, 1);
gpio_request(FPGA_CCLK, "FPGA_CCLK");
gpio_direction_output(FPGA_CCLK, 1);
gpio_request(FPGA_DIN, "FPGA_DIN");
gpio_direction_output(FPGA_DIN, 0);
gpio_request(FPGA_INIT, "FPGA_INIT");
gpio_direction_input(FPGA_INIT);
gpio_request(FPGA_DONE, "FPGA_DONE");
gpio_direction_input(FPGA_DONE);
/* Be sure that signal are deasserted */
gpio_set_value(FPGA_RESET, 1);
gpio_set_value(FPGA_PROG, 1);
return 0;
}
int fpga_post_config_fn(int cookie)
{
debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
fpga_reset(true);
udelay(100);
fpga_reset(false);
return 0;
}
/* Write program to the FPGA */
int fpga_wr_fn(int nassert_write, int flush, int cookie)
{
gpio_set_value(FPGA_DIN, nassert_write);
return nassert_write;
}
int fpga_clk_fn(int assert_clk, int flush, int cookie)
{
gpio_set_value(FPGA_CCLK, assert_clk);
return assert_clk;
}
xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = {
fpga_pre_config_fn,
fpga_pgm_fn,
fpga_clk_fn,
fpga_init_fn,
fpga_done_fn,
fpga_wr_fn,
fpga_post_config_fn,
};
xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
(void *)&mt_ventoux_fpga_fns, 0);
/* Initialize the FPGA */
static void mt_ventoux_init_fpga(void)
{
fpga_pre_config_fn(0);
/* Setting CS1 for FPGA access */
enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
FPGA_BASE_ADDR, GPMC_SIZE_128M);
fpga_init();
fpga_add(fpga_xilinx, &fpga);
}
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
mt_ventoux_init_fpga();
/* GPIO_140: speaker #mute */
MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4))
/* GPIO_141: Buzz Hi */
MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4))
/* Turning off the buzzer */
gpio_request(BUZZER, "BUZZER_MUTE");
gpio_request(SPEAKER, "SPEAKER");
gpio_direction_output(BUZZER, 0);
gpio_direction_output(SPEAKER, 0);
/* Activate USB power */
gpio_request(USB1_PWR, "USB1_PWR");
gpio_request(USB2_PWR, "USB2_PWR");
gpio_direction_output(USB1_PWR, 1);
gpio_direction_output(USB2_PWR, 1);
return 0;
}
#ifndef CONFIG_SPL_BUILD
int misc_init_r(void)
{
char *eth_addr;
struct tam3517_module_info info;
int ret;
TAM3517_READ_EEPROM(&info, ret);
omap_die_id_display();
if (ret)
return 0;
eth_addr = getenv("ethaddr");
if (!eth_addr)
TAM3517_READ_MAC_FROM_EEPROM(&info);
TAM3517_PRINT_SOM_INFO(&info);
return 0;
}
#endif
/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
*/
void set_muxconf_regs(void)
{
MUX_MT_VENTOUX();
}
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int board_eth_init(bd_t *bis)
{
davinci_emac_initialize();
return 0;
}
#if defined(CONFIG_OMAP_HSMMC) && \
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
int board_video_init(void)
{
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
struct panel_config *panel = &lcd_cfg[0];
char *s;
u32 index = 0;
void *fb;
fb = (void *)0x88000000;
s = getenv("panel");
if (s) {
index = simple_strtoul(s, NULL, 10);
if (index < ARRAY_SIZE(lcd_cfg))
panel = &lcd_cfg[index];
else
return 0;
}
panel->frame_buffer = fb;
printf("Panel: %dx%d\n", panel_resolution[index].xres,
panel_resolution[index].yres);
panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
(panel_resolution[index].xres - 1);
gpio_request(LCD_PWR, "LCD Power");
gpio_request(LCD_PON_PIN, "LCD Pon");
gpio_direction_output(LCD_PWR, 0);
gpio_direction_output(LCD_PON_PIN, 1);
setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
omap3_dss_panel_config(panel);
omap3_dss_enable();
return 0;
}
#endif