90 lines
2.5 KiB
C
90 lines
2.5 KiB
C
/*
|
|
* (C) Copyright 2010-2012
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/funcmux.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
|
|
#ifdef CONFIG_TEGRA_MMC
|
|
/*
|
|
* Routine: pin_mux_mmc
|
|
* Description: setup the pin muxes/tristate values for the SDMMC(s)
|
|
*/
|
|
void pin_mux_mmc(void)
|
|
{
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
|
|
ret = i2c_set_bus_num(0);
|
|
if (ret)
|
|
printf("i2c_set_bus_num failed: %d\n", ret);
|
|
val = 0x29;
|
|
ret = i2c_write(0x3c, 0x46, 1, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
|
|
val = 0x00;
|
|
ret = i2c_write(0x3c, 0x45, 1, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
|
|
val = 0x1f;
|
|
ret = i2c_write(0x3c, 0x44, 1, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
|
|
|
|
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
|
|
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
|
|
}
|
|
#endif
|
|
|
|
/* this is a weak define that we are overriding */
|
|
void pin_mux_usb(void)
|
|
{
|
|
uchar val;
|
|
int ret;
|
|
|
|
/*
|
|
* This is a hack. This should be represented in DT using the
|
|
* vbus-gpio property. However, U-Boot's DT support doesn't
|
|
* support any GPIO controller other than the Tegra's yet.
|
|
*/
|
|
|
|
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
|
|
ret = i2c_set_bus_num(0);
|
|
if (ret)
|
|
printf("i2c_set_bus_num failed: %d\n", ret);
|
|
val = 0x03;
|
|
ret = i2c_write(0x20, 2, 1, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
|
|
val = 0xfc;
|
|
ret = i2c_write(0x20, 6, 1, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
|
|
}
|