u-boot/drivers/mmc
Siva Durga Prasad Paladugu b215614638 mmc: zynq_sdhci: Added qurik to disable high speed
Add quirk to disable high speed incase the high
speed was broken.This solves the issue where the
the controller is used in High Speed Mode and the
the hold time requirement for the JEDEC/MMC 4.41
specification is NOT met.
This timing issue is not on all boards and hence
provided config option to enable it when required.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Emil Lenchak <emill@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
..
arm_pl180_mmci.c mmc: Split mmc struct, rework mmc initialization (v2) 2014-03-24 12:58:56 +02:00
arm_pl180_mmci.h mmc: Split mmc struct, rework mmc initialization (v2) 2014-03-24 12:58:56 +02:00
atmel_sdhci.c mmc: atmel: Add atmel sdhci support 2015-11-03 14:21:31 +01:00
bcm2835_sdhci.c mmc: bcm2835_sdhci: Restore original delay behavior 2015-06-25 17:04:37 -04:00
bfin_sdh.c mmc: set correct block size value in bfin sdh driver 2014-10-03 17:26:49 +03:00
davinci_mmc.c mmc: Split mmc struct, rework mmc initialization (v2) 2014-03-24 12:58:56 +02:00
dw_mmc.c mmc: dw_mmc: support fifo mode in dwc mmc driver 2015-12-01 08:07:22 -07:00
exynos_dw_mmc.c mmc: Support bypass mode with the get_mmc_clk() method 2015-09-02 21:28:23 -06:00
fsl_esdhc.c ARM: imx: fsl_esdhc: fix usage of low 4 bits of sysctl register 2016-01-03 15:21:21 +01:00
fsl_esdhc_spl.c block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
ftsdc010_mci.c mmc: Split mmc struct, rework mmc initialization (v2) 2014-03-24 12:58:56 +02:00
ftsdc021_sdhci.c mmc: add Faraday FTSDC021 SDHCI controller support 2013-12-08 14:23:05 +02:00
gen_atmel_mci.c mmc: atmel: Zap global 'initialized' variable 2015-11-01 22:02:15 +01:00
hi6220_dw_mmc.c driver: dwmmc: Fix pointer conversion warnings for hikey 2015-11-12 15:59:00 -05:00
Kconfig sunxi: Use Kconfig CONFIG_MMC 2015-10-20 22:48:28 +02:00
kona_sdhci.c mmc: remove the MMC_MODE_HC flag 2015-05-05 12:29:36 +03:00
Makefile mmc: atmel: Add atmel sdhci support 2015-11-03 14:21:31 +01:00
mmc-uclass.c dm: mmc: Add an MMC uclass 2015-07-21 17:39:25 -06:00
mmc.c dm: mmc: Try to honour the sequence order 2016-01-20 19:06:22 -07:00
mmc_private.h block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
mmc_spi.c mmc_spi: Big-endian support 2015-08-13 11:24:26 +03:00
mmc_write.c mmc: store hwpart in the block device 2016-01-13 21:05:19 -05:00
mv_sdhci.c mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows 2015-10-21 02:25:02 +02:00
mvebu_mmc.c mmc: remove the MMC_MODE_HC flag 2015-05-05 12:29:36 +03:00
mxcmmc.c mmc: Split mmc struct, rework mmc initialization (v2) 2014-03-24 12:58:56 +02:00
mxsmmc.c mmc: remove the MMC_MODE_HC flag 2015-05-05 12:29:36 +03:00
omap_hsmmc.c drivers: mmc: omap_hsmmc: convert driver to adopt device driver model 2015-10-22 14:43:57 -04:00
pci_mmc.c dm: Convert PCI MMC over to use DM PCI API 2016-01-12 10:19:09 -07:00
pxa_mmc_gen.c arm: pxa: mmc: clean-up include file order 2015-08-24 20:30:37 +02:00
rockchip_dw_mmc.c rockchip: Use a separate clock ID for clocks 2016-01-21 20:42:34 -07:00
rpmb.c Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header 2015-09-11 17:15:20 -04:00
s3c_sdi.c mmc: remove the MMC_MODE_HC flag 2015-05-05 12:29:36 +03:00
s5p_sdhci.c s5p sdhci: call pinmux for card's gpio pins before use them 2015-11-02 10:38:14 +09:00
sandbox_mmc.c dm: test: Add a test for the mmc uclass 2015-07-21 17:39:32 -06:00
sdhci.c mmc: sdhci: Clear high speed if not supported 2016-01-27 15:55:54 +01:00
sh_mmcif.c Add more SPDX-License-Identifier tags 2016-01-19 08:31:21 -05:00
sh_mmcif.h Add more SPDX-License-Identifier tags 2016-01-19 08:31:21 -05:00
sh_sdhi.c mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC 2015-01-19 16:24:25 +02:00
socfpga_dw_mmc.c arm: socfpga: fix up a questionable macro for SDMMC 2015-12-20 03:44:56 +01:00
spear_sdhci.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sunxi_mmc.c block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
tegra_mmc.c of: clean up OF_CONTROL ifdef conditionals 2015-08-18 13:46:05 -04:00
zynq_sdhci.c mmc: zynq_sdhci: Added qurik to disable high speed 2016-01-27 15:55:54 +01:00