u-boot/drivers/mmc/exynos_dw_mmc.c
Jaehoon Chung e5113c333b mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg
Some arguments don't need to pass to dwmci_setup_cfg.
They are already included in dwmci_host structure.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-10 15:23:33 +09:00

306 lines
7.4 KiB
C

/*
* (C) Copyright 2012 SAMSUNG Electronics
* Jaehoon Chung <jh80.chung@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dwmmc.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
#include <errno.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
#define DWMMC_MIN_FREQ 400000
#define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001
#define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001
#ifdef CONFIG_DM_MMC
#include <dm.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos_mmc_plat {
struct mmc_config cfg;
struct mmc mmc;
};
#endif
/* Exynos implmentation specific drver private data */
struct dwmci_exynos_priv_data {
#ifdef CONFIG_DM_MMC
struct dwmci_host host;
#endif
u32 sdr_timing;
};
/*
* Function used as callback function to initialise the
* CLKSEL register for every mmc channel.
*/
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
struct dwmci_exynos_priv_data *priv = host->priv;
dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing);
}
unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
{
unsigned long sclk;
int8_t clk_div;
/*
* Since SDCLKIN is divided inside controller by the DIVRATIO
* value set in the CLKSEL register, we need to use the same output
* clock value to calculate the CLKDIV value.
* as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
*/
clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
& DWMCI_DIVRATIO_MASK) + 1;
sclk = get_mmc_clk(host->dev_index);
/*
* Assume to know divider value.
* When clock unit is broken, need to set "host->div"
*/
return sclk / clk_div / (host->div + 1);
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
{
struct dwmci_exynos_priv_data *priv = host->priv;
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
dwmci_writel(host, EMMCP_SEND0, 0);
dwmci_writel(host, EMMCP_CTRL0,
MPSCTRL_SECURE_READ_BIT |
MPSCTRL_SECURE_WRITE_BIT |
MPSCTRL_NON_SECURE_READ_BIT |
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
}
/* Set to timing value at initial time */
if (priv->sdr_timing)
exynos_dwmci_clksel(host);
}
static int exynos_dwmci_core_init(struct dwmci_host *host)
{
unsigned int div;
unsigned long freq, sclk;
if (host->bus_hz)
freq = host->bus_hz;
else
freq = DWMMC_MAX_FREQ;
/* request mmc clock vlaue of 52MHz. */
sclk = get_mmc_clk(host->dev_index);
div = DIV_ROUND_UP(sclk, freq);
/* set the clock divisor for mmc */
set_mmc_clk(host->dev_index, div);
host->name = "EXYNOS DWMMC";
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
host->board_init = exynos_dwmci_board_init;
host->caps = MMC_MODE_DDR_52MHz;
host->clksel = exynos_dwmci_clksel;
host->get_mmc_clk = exynos_dwmci_get_clk;
#ifndef CONFIG_DM_MMC
/* Add the mmc channel to be registered with mmc core */
if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
printf("DWMMC%d registration failed\n", host->dev_index);
return -1;
}
#endif
return 0;
}
static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
static int do_dwmci_init(struct dwmci_host *host)
{
int flag, err;
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
err = exynos_pinmux_config(host->dev_id, flag);
if (err) {
printf("DWMMC%d not configure\n", host->dev_index);
return err;
}
return exynos_dwmci_core_init(host);
}
static int exynos_dwmci_get_config(const void *blob, int node,
struct dwmci_host *host)
{
int err = 0;
u32 base, timing[3];
struct dwmci_exynos_priv_data *priv;
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
if (!priv) {
error("dwmci_exynos_priv_data malloc fail!\n");
return -ENOMEM;
}
/* Extract device id for each mmc channel */
host->dev_id = pinmux_decode_periph_id(blob, node);
host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
if (host->dev_index == host->dev_id)
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
if (host->dev_index > 4) {
printf("DWMMC%d: Can't get the dev index\n", host->dev_index);
return -EINVAL;
}
/* Get the bus width from the device node (Default is 4bit buswidth) */
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 4);
/* Set the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
printf("DWMMC%d: Can't get base address\n", host->dev_index);
return -EINVAL;
}
host->ioaddr = (void *)base;
/* Extract the timing info from the node */
err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
if (err) {
printf("DWMMC%d: Can't get sdr-timings for devider\n",
host->dev_index);
return -EINVAL;
}
priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(timing[2]));
/* sdr_timing didn't assigned anything, use the default value */
if (!priv->sdr_timing) {
if (host->dev_index == 0)
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
else if (host->dev_index == 2)
priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
}
host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
host->div = fdtdec_get_int(blob, node, "div", 0);
host->priv = priv;
return 0;
}
static int exynos_dwmci_process_node(const void *blob,
int node_list[], int count)
{
struct dwmci_host *host;
int i, node, err;
for (i = 0; i < count; i++) {
node = node_list[i];
if (node <= 0)
continue;
host = &dwmci_host[i];
err = exynos_dwmci_get_config(blob, node, host);
if (err) {
printf("%s: failed to decode dev %d\n", __func__, i);
return err;
}
do_dwmci_init(host);
}
return 0;
}
int exynos_dwmmc_init(const void *blob)
{
int node_list[DWMMC_MAX_CH_NUM];
int boot_dev_node;
int err = 0, count;
count = fdtdec_find_aliases_for_id(blob, "mmc",
COMPAT_SAMSUNG_EXYNOS_DWMMC, node_list,
DWMMC_MAX_CH_NUM);
/* For DWMMC always set boot device as mmc 0 */
if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) {
boot_dev_node = node_list[2];
node_list[2] = node_list[0];
node_list[0] = boot_dev_node;
}
err = exynos_dwmci_process_node(blob, node_list, count);
return err;
}
#ifdef CONFIG_DM_MMC
static int exynos_dwmmc_probe(struct udevice *dev)
{
struct exynos_mmc_plat *plat = dev_get_platdata(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct dwmci_exynos_priv_data *priv = dev_get_priv(dev);
struct dwmci_host *host = &priv->host;
int err;
err = exynos_dwmci_get_config(gd->fdt_blob, dev->of_offset, host);
if (err)
return err;
err = do_dwmci_init(host);
if (err)
return err;
dwmci_setup_cfg(&plat->cfg, host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ);
host->mmc = &plat->mmc;
host->mmc->priv = &priv->host;
host->priv = dev;
upriv->mmc = host->mmc;
return dwmci_probe(dev);
}
static int exynos_dwmmc_bind(struct udevice *dev)
{
struct exynos_mmc_plat *plat = dev_get_platdata(dev);
return dwmci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id exynos_dwmmc_ids[] = {
{ .compatible = "samsung,exynos4412-dw-mshc" },
{ }
};
U_BOOT_DRIVER(exynos_dwmmc_drv) = {
.name = "exynos_dwmmc",
.id = UCLASS_MMC,
.of_match = exynos_dwmmc_ids,
.bind = exynos_dwmmc_bind,
.ops = &dm_dwmci_ops,
.probe = exynos_dwmmc_probe,
.priv_auto_alloc_size = sizeof(struct dwmci_exynos_priv_data),
.platdata_auto_alloc_size = sizeof(struct exynos_mmc_plat),
};
#endif