Errata ID:i727 Description: The refresh rate is programmed in the EMIF_SDRAM_REF_CTRL[15:0] REG_REFRESH_RATE parameter taking into account frequency of the device. When a warm reset is applied on the system, the OMAP processor restarts with another OPP and so frequency is not the same. Due to this frequency change, the refresh rate will be too low and could result in an unexpected behavior on the memory side. Workaround: The workaround is to force self-refresh when coming back from the warm reset with the following sequence: • Set EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2 • Set EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM to 0x0 • Do a dummy read (loads automatically new value of sr_tim) This will reduce the risk of memory content corruption, but memory content can't be guaranteed after a warm reset. This errata is impacted on OMAP4430: 1.0, 2.0, 2.1, 2.2, 2.3 OMAP4460: 1.0, 1.1 OMAP4470: 1.0 OMAP5430: 1.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
254 lines
5.7 KiB
C
254 lines
5.7 KiB
C
/*
|
|
*
|
|
* Common functions for OMAP4/5 based boards
|
|
*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Aneesh V <aneesh@ti.com>
|
|
* Steve Sakoman <steve@sakoman.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/sizes.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/omap_common.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
|
|
{
|
|
int i;
|
|
struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
|
|
|
|
for (i = 0; i < size; i++, pad++)
|
|
writew(pad->val, base + pad->offset);
|
|
}
|
|
|
|
static void set_mux_conf_regs(void)
|
|
{
|
|
switch (omap_hw_init_context()) {
|
|
case OMAP_INIT_CONTEXT_SPL:
|
|
set_muxconf_regs_essential();
|
|
break;
|
|
case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
|
|
#ifdef CONFIG_SYS_ENABLE_PADS_ALL
|
|
set_muxconf_regs_non_essential();
|
|
#endif
|
|
break;
|
|
case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
|
|
case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
|
|
set_muxconf_regs_essential();
|
|
#ifdef CONFIG_SYS_ENABLE_PADS_ALL
|
|
set_muxconf_regs_non_essential();
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
u32 cortex_rev(void)
|
|
{
|
|
|
|
unsigned int rev;
|
|
|
|
/* Read Main ID Register (MIDR) */
|
|
asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
|
|
|
|
return rev;
|
|
}
|
|
|
|
void omap_rev_string(void)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
|
|
u32 major_rev = (omap_rev & 0x00000F00) >> 8;
|
|
u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
|
|
|
|
printf("OMAP%x ES%x.%x\n", omap_variant, major_rev,
|
|
minor_rev);
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void init_boot_params(void)
|
|
{
|
|
boot_params_ptr = (u32 *) &boot_params;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Routine: s_init
|
|
* Description: Does early system init of watchdog, muxing, andclocks
|
|
* Watchdog disable is done always. For the rest what gets done
|
|
* depends on the boot mode in which this function is executed
|
|
* 1. s_init of SPL running from SRAM
|
|
* 2. s_init of U-Boot running from FLASH
|
|
* 3. s_init of U-Boot loaded to SDRAM by SPL
|
|
* 4. s_init of U-Boot loaded to SDRAM by ROM code using the
|
|
* Configuration Header feature
|
|
* Please have a look at the respective functions to see what gets
|
|
* done in each of these cases
|
|
* This function is called with SRAM stack.
|
|
*/
|
|
void s_init(void)
|
|
{
|
|
init_omap_revision();
|
|
#ifdef CONFIG_SPL_BUILD
|
|
if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0))
|
|
force_emif_self_refresh();
|
|
#endif
|
|
watchdog_init();
|
|
set_mux_conf_regs();
|
|
#ifdef CONFIG_SPL_BUILD
|
|
setup_clocks_for_console();
|
|
preloader_console_init();
|
|
do_io_settings();
|
|
#endif
|
|
prcm_init();
|
|
#ifdef CONFIG_SPL_BUILD
|
|
timer_init();
|
|
|
|
/* For regular u-boot sdram_init() is called from dram_init() */
|
|
sdram_init();
|
|
init_boot_params();
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Routine: wait_for_command_complete
|
|
* Description: Wait for posting to finish on watchdog
|
|
*/
|
|
void wait_for_command_complete(struct watchdog *wd_base)
|
|
{
|
|
int pending = 1;
|
|
do {
|
|
pending = readl(&wd_base->wwps);
|
|
} while (pending);
|
|
}
|
|
|
|
/*
|
|
* Routine: watchdog_init
|
|
* Description: Shut down watch dogs
|
|
*/
|
|
void watchdog_init(void)
|
|
{
|
|
struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
|
|
|
|
writel(WD_UNLOCK1, &wd2_base->wspr);
|
|
wait_for_command_complete(wd2_base);
|
|
writel(WD_UNLOCK2, &wd2_base->wspr);
|
|
}
|
|
|
|
|
|
/*
|
|
* This function finds the SDRAM size available in the system
|
|
* based on DMM section configurations
|
|
* This is needed because the size of memory installed may be
|
|
* different on different versions of the board
|
|
*/
|
|
u32 omap_sdram_size(void)
|
|
{
|
|
u32 section, i, valid;
|
|
u64 sdram_start = 0, sdram_end = 0, addr,
|
|
size, total_size = 0, trap_size = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
section = __raw_readl(DMM_BASE + i*4);
|
|
valid = (section & EMIF_SDRC_ADDRSPC_MASK) >>
|
|
(EMIF_SDRC_ADDRSPC_SHIFT);
|
|
addr = section & EMIF_SYS_ADDR_MASK;
|
|
|
|
/* See if the address is valid */
|
|
if ((addr >= DRAM_ADDR_SPACE_START) &&
|
|
(addr < DRAM_ADDR_SPACE_END)) {
|
|
size = ((section & EMIF_SYS_SIZE_MASK) >>
|
|
EMIF_SYS_SIZE_SHIFT);
|
|
size = 1 << size;
|
|
size *= SZ_16M;
|
|
|
|
if (valid != DMM_SDRC_ADDR_SPC_INVALID) {
|
|
if (!sdram_start || (addr < sdram_start))
|
|
sdram_start = addr;
|
|
if (!sdram_end || ((addr + size) > sdram_end))
|
|
sdram_end = addr + size;
|
|
} else {
|
|
trap_size = size;
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
total_size = (sdram_end - sdram_start) - (trap_size);
|
|
|
|
return total_size;
|
|
}
|
|
|
|
|
|
/*
|
|
* Routine: dram_init
|
|
* Description: sets uboots idea of sdram size
|
|
*/
|
|
int dram_init(void)
|
|
{
|
|
sdram_init();
|
|
gd->ram_size = omap_sdram_size();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Print board information
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
puts(sysinfo.board_string);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get_device_type(): tell if GP/HS/EMU/TST
|
|
*/
|
|
u32 get_device_type(void)
|
|
{
|
|
struct omap_sys_ctrl_regs *ctrl =
|
|
(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
|
|
|
|
return (readl(&ctrl->control_status) &
|
|
(DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
|
|
}
|
|
|
|
/*
|
|
* Print CPU information
|
|
*/
|
|
int print_cpuinfo(void)
|
|
{
|
|
puts("CPU : ");
|
|
omap_rev_string();
|
|
|
|
return 0;
|
|
}
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
void enable_caches(void)
|
|
{
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
}
|
|
#endif
|