Use ENTRY and ENDPROC with assembly functions to ensure necessary assembler directives for all functions. Signed-off-by: Aneesh V <aneesh@ti.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
503 lines
13 KiB
ArmAsm
503 lines
13 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Initial Code by:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/clocks_omap3.h>
|
|
#include <linux/linkage.h>
|
|
|
|
_TEXT_BASE:
|
|
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
ENTRY(save_boot_params)
|
|
ldr r4, =omap3_boot_device
|
|
ldr r5, [r0, #0x4]
|
|
and r5, r5, #0xff
|
|
str r5, [r4]
|
|
bx lr
|
|
ENDPROC(save_boot_params)
|
|
#endif
|
|
|
|
ENTRY(omap3_gp_romcode_call)
|
|
PUSH {r4-r12, lr} @ Save all registers from ROM code!
|
|
MOV r12, r0 @ Copy the Service ID in R12
|
|
MOV r0, r1 @ Copy parameter to R0
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c10, 5 @ DMB
|
|
.word 0xe1600070 @ SMC #0 to enter monitor - hand assembled
|
|
@ because we use -march=armv5
|
|
POP {r4-r12, pc}
|
|
ENDPROC(omap3_gp_romcode_call)
|
|
|
|
/*
|
|
* Funtion for making PPA HAL API calls in secure devices
|
|
* Input:
|
|
* R0 - Service ID
|
|
* R1 - paramer list
|
|
*/
|
|
ENTRY(do_omap3_emu_romcode_call)
|
|
PUSH {r4-r12, lr} @ Save all registers from ROM code!
|
|
MOV r12, r0 @ Copy the Secure Service ID in R12
|
|
MOV r3, r1 @ Copy the pointer to va_list in R3
|
|
MOV r1, #0 @ Process ID - 0
|
|
MOV r2, #OMAP3_EMU_HAL_START_HAL_CRITICAL @ Copy the pointer
|
|
@ to va_list in R3
|
|
MOV r6, #0xFF @ Indicate new Task call
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c10, 5 @ DMB
|
|
.word 0xe1600071 @ SMC #1 to call PPA service - hand assembled
|
|
@ because we use -march=armv5
|
|
POP {r4-r12, pc}
|
|
ENDPROC(do_omap3_emu_romcode_call)
|
|
|
|
#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
|
|
/**************************************************************************
|
|
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
|
|
* R1 = SRAM destination address.
|
|
*************************************************************************/
|
|
ENTRY(cpy_clk_code)
|
|
/* Copy DPLL code into SRAM */
|
|
adr r0, go_to_speed /* get addr of clock setting code */
|
|
mov r2, #384 /* r2 size to copy (div by 32 bytes) */
|
|
mov r1, r1 /* r1 <- dest address (passed in) */
|
|
add r2, r2, r0 /* r2 <- source end address */
|
|
next2:
|
|
ldmia r0!, {r3 - r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3 - r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end address [r2] */
|
|
bne next2
|
|
mov pc, lr /* back to caller */
|
|
ENDPROC(cpy_clk_code)
|
|
|
|
/* ***************************************************************************
|
|
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
|
|
* -executed from SRAM.
|
|
* R0 = CM_CLKEN_PLL-bypass value
|
|
* R1 = CM_CLKSEL1_PLL-m, n, and divider values
|
|
* R2 = CM_CLKSEL_CORE-divider values
|
|
* R3 = CM_IDLEST_CKGEN - addr dpll lock wait
|
|
*
|
|
* Note: If core unlocks/relocks and SDRAM is running fast already it gets
|
|
* confused. A reset of the controller gets it back. Taking away its
|
|
* L3 when its not in self refresh seems bad for it. Normally, this
|
|
* code runs from flash before SDR is init so that should be ok.
|
|
****************************************************************************/
|
|
ENTRY(go_to_speed)
|
|
stmfd sp!, {r4 - r6}
|
|
|
|
/* move into fast relock bypass */
|
|
ldr r4, pll_ctl_add
|
|
str r0, [r4]
|
|
wait1:
|
|
ldr r5, [r3] /* get status */
|
|
and r5, r5, #0x1 /* isolate core status */
|
|
cmp r5, #0x1 /* still locked? */
|
|
beq wait1 /* if lock, loop */
|
|
|
|
/* set new dpll dividers _after_ in bypass */
|
|
ldr r5, pll_div_add1
|
|
str r1, [r5] /* set m, n, m2 */
|
|
ldr r5, pll_div_add2
|
|
str r2, [r5] /* set l3/l4/.. dividers*/
|
|
ldr r5, pll_div_add3 /* wkup */
|
|
ldr r2, pll_div_val3 /* rsm val */
|
|
str r2, [r5]
|
|
ldr r5, pll_div_add4 /* gfx */
|
|
ldr r2, pll_div_val4
|
|
str r2, [r5]
|
|
ldr r5, pll_div_add5 /* emu */
|
|
ldr r2, pll_div_val5
|
|
str r2, [r5]
|
|
|
|
/* now prepare GPMC (flash) for new dpll speed */
|
|
/* flash needs to be stable when we jump back to it */
|
|
ldr r5, flash_cfg3_addr
|
|
ldr r2, flash_cfg3_val
|
|
str r2, [r5]
|
|
ldr r5, flash_cfg4_addr
|
|
ldr r2, flash_cfg4_val
|
|
str r2, [r5]
|
|
ldr r5, flash_cfg5_addr
|
|
ldr r2, flash_cfg5_val
|
|
str r2, [r5]
|
|
ldr r5, flash_cfg1_addr
|
|
ldr r2, [r5]
|
|
orr r2, r2, #0x3 /* up gpmc divider */
|
|
str r2, [r5]
|
|
|
|
/* lock DPLL3 and wait a bit */
|
|
orr r0, r0, #0x7 /* set up for lock mode */
|
|
str r0, [r4] /* lock */
|
|
nop /* ARM slow at this point working at sys_clk */
|
|
nop
|
|
nop
|
|
nop
|
|
wait2:
|
|
ldr r5, [r3] /* get status */
|
|
and r5, r5, #0x1 /* isolate core status */
|
|
cmp r5, #0x1 /* still locked? */
|
|
bne wait2 /* if lock, loop */
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
ldmfd sp!, {r4 - r6}
|
|
mov pc, lr /* back to caller, locked */
|
|
ENDPROC(go_to_speed)
|
|
|
|
_go_to_speed: .word go_to_speed
|
|
|
|
/* these constants need to be close for PIC code */
|
|
/* The Nor has to be in the Flash Base CS0 for this condition to happen */
|
|
flash_cfg1_addr:
|
|
.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1)
|
|
flash_cfg3_addr:
|
|
.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3)
|
|
flash_cfg3_val:
|
|
.word STNOR_GPMC_CONFIG3
|
|
flash_cfg4_addr:
|
|
.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4)
|
|
flash_cfg4_val:
|
|
.word STNOR_GPMC_CONFIG4
|
|
flash_cfg5_val:
|
|
.word STNOR_GPMC_CONFIG5
|
|
flash_cfg5_addr:
|
|
.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5)
|
|
pll_ctl_add:
|
|
.word CM_CLKEN_PLL
|
|
pll_div_add1:
|
|
.word CM_CLKSEL1_PLL
|
|
pll_div_add2:
|
|
.word CM_CLKSEL_CORE
|
|
pll_div_add3:
|
|
.word CM_CLKSEL_WKUP
|
|
pll_div_val3:
|
|
.word (WKUP_RSM << 1)
|
|
pll_div_add4:
|
|
.word CM_CLKSEL_GFX
|
|
pll_div_val4:
|
|
.word (GFX_DIV << 0)
|
|
pll_div_add5:
|
|
.word CM_CLKSEL1_EMU
|
|
pll_div_val5:
|
|
.word CLSEL1_EMU_VAL
|
|
|
|
#endif
|
|
|
|
ENTRY(lowlevel_init)
|
|
ldr sp, SRAM_STACK
|
|
str ip, [sp] /* stash old link register */
|
|
mov ip, lr /* save link reg across call */
|
|
#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT)
|
|
/*
|
|
* No need to copy/exec the clock code - DPLL adjust already done
|
|
* in NAND/oneNAND Boot.
|
|
*/
|
|
ldr r1, =SRAM_CLK_CODE
|
|
bl cpy_clk_code
|
|
#endif /* NAND Boot */
|
|
bl s_init /* go setup pll, mux, memory */
|
|
ldr ip, [sp] /* restore save ip */
|
|
mov lr, ip /* restore link reg */
|
|
|
|
/* back to arch calling code */
|
|
mov pc, lr
|
|
ENDPROC(lowlevel_init)
|
|
|
|
/* the literal pools origin */
|
|
.ltorg
|
|
|
|
REG_CONTROL_STATUS:
|
|
.word CONTROL_STATUS
|
|
SRAM_STACK:
|
|
.word LOW_LEVEL_SRAM_STACK
|
|
|
|
/* DPLL(1-4) PARAM TABLES */
|
|
|
|
/*
|
|
* Each of the tables has M, N, FREQSEL, M2 values defined for nominal
|
|
* OPP (1.2V). The fields are defined according to dpll_param struct (clock.c).
|
|
* The values are defined for all possible sysclk and for ES1 and ES2.
|
|
*/
|
|
|
|
mpu_dpll_param:
|
|
/* 12MHz */
|
|
/* ES1 */
|
|
.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1
|
|
/* ES2 */
|
|
.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2
|
|
/* 3410 */
|
|
.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12
|
|
|
|
/* 13MHz */
|
|
/* ES1 */
|
|
.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1
|
|
/* ES2 */
|
|
.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2
|
|
/* 3410 */
|
|
.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13
|
|
|
|
/* 19.2MHz */
|
|
/* ES1 */
|
|
.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1
|
|
/* ES2 */
|
|
.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2
|
|
/* 3410 */
|
|
.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2
|
|
|
|
/* 26MHz */
|
|
/* ES1 */
|
|
.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1
|
|
/* ES2 */
|
|
.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2
|
|
/* 3410 */
|
|
.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26
|
|
|
|
/* 38.4MHz */
|
|
/* ES1 */
|
|
.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1
|
|
/* ES2 */
|
|
.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2
|
|
/* 3410 */
|
|
.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4
|
|
|
|
|
|
.globl get_mpu_dpll_param
|
|
get_mpu_dpll_param:
|
|
adr r0, mpu_dpll_param
|
|
mov pc, lr
|
|
|
|
iva_dpll_param:
|
|
/* 12MHz */
|
|
/* ES1 */
|
|
.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1
|
|
/* ES2 */
|
|
.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2
|
|
/* 3410 */
|
|
.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12
|
|
|
|
/* 13MHz */
|
|
/* ES1 */
|
|
.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1
|
|
/* ES2 */
|
|
.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2
|
|
/* 3410 */
|
|
.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13
|
|
|
|
/* 19.2MHz */
|
|
/* ES1 */
|
|
.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1
|
|
/* ES2 */
|
|
.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2
|
|
/* 3410 */
|
|
.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2
|
|
|
|
/* 26MHz */
|
|
/* ES1 */
|
|
.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1
|
|
/* ES2 */
|
|
.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2
|
|
/* 3410 */
|
|
.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26
|
|
|
|
/* 38.4MHz */
|
|
/* ES1 */
|
|
.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1
|
|
/* ES2 */
|
|
.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2
|
|
/* 3410 */
|
|
.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4
|
|
|
|
|
|
.globl get_iva_dpll_param
|
|
get_iva_dpll_param:
|
|
adr r0, iva_dpll_param
|
|
mov pc, lr
|
|
|
|
/* Core DPLL targets for L3 at 166 & L133 */
|
|
core_dpll_param:
|
|
/* 12MHz */
|
|
/* ES1 */
|
|
.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1
|
|
/* ES2 */
|
|
.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
|
|
/* 3410 */
|
|
.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
|
|
|
|
/* 13MHz */
|
|
/* ES1 */
|
|
.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1
|
|
/* ES2 */
|
|
.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
|
|
/* 3410 */
|
|
.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
|
|
|
|
/* 19.2MHz */
|
|
/* ES1 */
|
|
.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1
|
|
/* ES2 */
|
|
.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
|
|
/* 3410 */
|
|
.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
|
|
|
|
/* 26MHz */
|
|
/* ES1 */
|
|
.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1
|
|
/* ES2 */
|
|
.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
|
|
/* 3410 */
|
|
.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
|
|
|
|
/* 38.4MHz */
|
|
/* ES1 */
|
|
.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1
|
|
/* ES2 */
|
|
.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
|
|
/* 3410 */
|
|
.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
|
|
|
|
.globl get_core_dpll_param
|
|
get_core_dpll_param:
|
|
adr r0, core_dpll_param
|
|
mov pc, lr
|
|
|
|
/* PER DPLL values are same for both ES1 and ES2 */
|
|
per_dpll_param:
|
|
/* 12MHz */
|
|
.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12
|
|
|
|
/* 13MHz */
|
|
.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13
|
|
|
|
/* 19.2MHz */
|
|
.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2
|
|
|
|
/* 26MHz */
|
|
.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26
|
|
|
|
/* 38.4MHz */
|
|
.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4
|
|
|
|
.globl get_per_dpll_param
|
|
get_per_dpll_param:
|
|
adr r0, per_dpll_param
|
|
mov pc, lr
|
|
|
|
/* PER2 DPLL values */
|
|
per2_dpll_param:
|
|
/* 12MHz */
|
|
.word PER2_M_12, PER2_N_12, PER2_FSEL_12, PER2_M2_12
|
|
|
|
/* 13MHz */
|
|
.word PER2_M_13, PER2_N_13, PER2_FSEL_13, PER2_M2_13
|
|
|
|
/* 19.2MHz */
|
|
.word PER2_M_19P2, PER2_N_19P2, PER2_FSEL_19P2, PER2_M2_19P2
|
|
|
|
/* 26MHz */
|
|
.word PER2_M_26, PER2_N_26, PER2_FSEL_26, PER2_M2_26
|
|
|
|
/* 38.4MHz */
|
|
.word PER2_M_38P4, PER2_N_38P4, PER2_FSEL_38P4, PER2_M2_38P4
|
|
|
|
.globl get_per2_dpll_param
|
|
get_per2_dpll_param:
|
|
adr r0, per2_dpll_param
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Tables for 36XX/37XX devices
|
|
*
|
|
*/
|
|
mpu_36x_dpll_param:
|
|
/* 12MHz */
|
|
.word 50, 0, 0, 1
|
|
/* 13MHz */
|
|
.word 600, 12, 0, 1
|
|
/* 19.2MHz */
|
|
.word 125, 3, 0, 1
|
|
/* 26MHz */
|
|
.word 300, 12, 0, 1
|
|
/* 38.4MHz */
|
|
.word 125, 7, 0, 1
|
|
|
|
iva_36x_dpll_param:
|
|
/* 12MHz */
|
|
.word 130, 2, 0, 1
|
|
/* 13MHz */
|
|
.word 20, 0, 0, 1
|
|
/* 19.2MHz */
|
|
.word 325, 11, 0, 1
|
|
/* 26MHz */
|
|
.word 10, 0, 0, 1
|
|
/* 38.4MHz */
|
|
.word 325, 23, 0, 1
|
|
|
|
core_36x_dpll_param:
|
|
/* 12MHz */
|
|
.word 100, 2, 0, 1
|
|
/* 13MHz */
|
|
.word 400, 12, 0, 1
|
|
/* 19.2MHz */
|
|
.word 375, 17, 0, 1
|
|
/* 26MHz */
|
|
.word 200, 12, 0, 1
|
|
/* 38.4MHz */
|
|
.word 375, 35, 0, 1
|
|
|
|
per_36x_dpll_param:
|
|
/* SYSCLK M N M2 M3 M4 M5 M6 m2DIV */
|
|
.word 12000, 360, 4, 9, 16, 5, 4, 3, 1
|
|
.word 13000, 864, 12, 9, 16, 9, 4, 3, 1
|
|
.word 19200, 360, 7, 9, 16, 5, 4, 3, 1
|
|
.word 26000, 432, 12, 9, 16, 9, 4, 3, 1
|
|
.word 38400, 360, 15, 9, 16, 5, 4, 3, 1
|
|
|
|
ENTRY(get_36x_mpu_dpll_param)
|
|
adr r0, mpu_36x_dpll_param
|
|
mov pc, lr
|
|
ENDPROC(get_36x_mpu_dpll_param)
|
|
|
|
ENTRY(get_36x_iva_dpll_param)
|
|
adr r0, iva_36x_dpll_param
|
|
mov pc, lr
|
|
ENDPROC(get_36x_iva_dpll_param)
|
|
|
|
ENTRY(get_36x_core_dpll_param)
|
|
adr r0, core_36x_dpll_param
|
|
mov pc, lr
|
|
ENDPROC(get_36x_core_dpll_param)
|
|
|
|
ENTRY(get_36x_per_dpll_param)
|
|
adr r0, per_36x_dpll_param
|
|
mov pc, lr
|
|
ENDPROC(get_36x_per_dpll_param)
|