u-boot/include/s3c2410.h
wdenk 48b42616e9 * Patches by David Müller, 12 Jun 2003:
- rewrite of the S3C24X0 register definitions stuff
  - "driver" for the built-in S3C24X0 RTC

* Patches by Yuli Barcohen, 12 Jun 2003:
  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
    configuration word supplied by FPGA on some MPC8260ADS boards

* Patch by Pantelis Antoniou, 10 Jun 2003:
  Unify status LED interface
2003-06-19 23:01:32 +00:00

228 lines
7.6 KiB
C

/*
* (C) Copyright 2003
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/************************************************
* NAME : s3c2410.h
* Version : 31.3.2003
*
* Based on S3C2410X User's manual Rev 1.1
************************************************/
#ifndef __S3C2410_H__
#define __S3C2410_H__
#define S3C24X0_UART_CHANNELS 3
#define S3C24X0_SPI_CHANNELS 2
/* S3C2410 only supports 512 Byte HW ECC */
#define S3C2410_ECCSIZE 512
#define S3C2410_ECCBYTES 3
typedef enum {
S3C24X0_UART0,
S3C24X0_UART1,
S3C24X0_UART2
} S3C24X0_UARTS_NR;
/* S3C2410 device base addresses */
#define S3C24X0_MEMCTL_BASE 0x48000000
#define S3C24X0_USB_HOST_BASE 0x49000000
#define S3C24X0_INTERRUPT_BASE 0x4A000000
#define S3C24X0_DMA_BASE 0x4B000000
#define S3C24X0_CLOCK_POWER_BASE 0x4C000000
#define S3C24X0_LCD_BASE 0x4D000000
#define S3C2410_NAND_BASE 0x4E000000
#define S3C24X0_UART_BASE 0x50000000
#define S3C24X0_TIMER_BASE 0x51000000
#define S3C24X0_USB_DEVICE_BASE 0x52000140
#define S3C24X0_WATCHDOG_BASE 0x53000000
#define S3C24X0_I2C_BASE 0x54000000
#define S3C24X0_I2S_BASE 0x55000000
#define S3C24X0_GPIO_BASE 0x56000000
#define S3C24X0_RTC_BASE 0x57000000
#define S3C2410_ADC_BASE 0x58000000
#define S3C24X0_SPI_BASE 0x59000000
#define S3C2410_SDI_BASE 0x5A000000
/* include common stuff */
#include <s3c24x0.h>
static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
{
return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
}
static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void)
{
return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
}
static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void)
{
return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
}
static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void)
{
return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
}
static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void)
{
return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
}
static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void)
{
return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
}
static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void)
{
return (S3C2410_NAND * const)S3C2410_NAND_BASE;
}
static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
{
return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
}
static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void)
{
return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
}
static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void)
{
return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
}
static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void)
{
return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
}
static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void)
{
return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
}
static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void)
{
return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
}
static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void)
{
return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
}
static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void)
{
return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
}
static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void)
{
return (S3C2410_ADC * const)S3C2410_ADC_BASE;
}
static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void)
{
return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
}
static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void)
{
return (S3C2410_SDI * const)S3C2410_SDI_BASE;
}
/* ISR */
#define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0))
#define pISR_UNDEF (*(unsigned *)(_ISR_STARTADDRESS+0x4))
#define pISR_SWI (*(unsigned *)(_ISR_STARTADDRESS+0x8))
#define pISR_PABORT (*(unsigned *)(_ISR_STARTADDRESS+0xC))
#define pISR_DABORT (*(unsigned *)(_ISR_STARTADDRESS+0x10))
#define pISR_RESERVED (*(unsigned *)(_ISR_STARTADDRESS+0x14))
#define pISR_IRQ (*(unsigned *)(_ISR_STARTADDRESS+0x18))
#define pISR_FIQ (*(unsigned *)(_ISR_STARTADDRESS+0x1C))
#define pISR_EINT0 (*(unsigned *)(_ISR_STARTADDRESS+0x20))
#define pISR_EINT1 (*(unsigned *)(_ISR_STARTADDRESS+0x24))
#define pISR_EINT2 (*(unsigned *)(_ISR_STARTADDRESS+0x28))
#define pISR_EINT3 (*(unsigned *)(_ISR_STARTADDRESS+0x2C))
#define pISR_EINT4_7 (*(unsigned *)(_ISR_STARTADDRESS+0x30))
#define pISR_EINT8_23 (*(unsigned *)(_ISR_STARTADDRESS+0x34))
#define pISR_BAT_FLT (*(unsigned *)(_ISR_STARTADDRESS+0x3C))
#define pISR_TICK (*(unsigned *)(_ISR_STARTADDRESS+0x40))
#define pISR_WDT (*(unsigned *)(_ISR_STARTADDRESS+0x44))
#define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48))
#define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4C))
#define pISR_TIMER2 (*(unsigned *)(_ISR_STARTADDRESS+0x50))
#define pISR_TIMER3 (*(unsigned *)(_ISR_STARTADDRESS+0x54))
#define pISR_TIMER4 (*(unsigned *)(_ISR_STARTADDRESS+0x58))
#define pISR_UART2 (*(unsigned *)(_ISR_STARTADDRESS+0x5C))
#define pISR_NOTUSED (*(unsigned *)(_ISR_STARTADDRESS+0x60))
#define pISR_DMA0 (*(unsigned *)(_ISR_STARTADDRESS+0x64))
#define pISR_DMA1 (*(unsigned *)(_ISR_STARTADDRESS+0x68))
#define pISR_DMA2 (*(unsigned *)(_ISR_STARTADDRESS+0x6C))
#define pISR_DMA3 (*(unsigned *)(_ISR_STARTADDRESS+0x70))
#define pISR_SDI (*(unsigned *)(_ISR_STARTADDRESS+0x74))
#define pISR_SPI0 (*(unsigned *)(_ISR_STARTADDRESS+0x78))
#define pISR_UART1 (*(unsigned *)(_ISR_STARTADDRESS+0x7C))
#define pISR_USBD (*(unsigned *)(_ISR_STARTADDRESS+0x84))
#define pISR_USBH (*(unsigned *)(_ISR_STARTADDRESS+0x88))
#define pISR_IIC (*(unsigned *)(_ISR_STARTADDRESS+0x8C))
#define pISR_UART0 (*(unsigned *)(_ISR_STARTADDRESS+0x90))
#define pISR_SPI1 (*(unsigned *)(_ISR_STARTADDRESS+0x94))
#define pISR_RTC (*(unsigned *)(_ISR_STARTADDRESS+0x98))
#define pISR_ADC (*(unsigned *)(_ISR_STARTADDRESS+0xA0))
/* PENDING BIT */
#define BIT_EINT0 (0x1)
#define BIT_EINT1 (0x1<<1)
#define BIT_EINT2 (0x1<<2)
#define BIT_EINT3 (0x1<<3)
#define BIT_EINT4_7 (0x1<<4)
#define BIT_EINT8_23 (0x1<<5)
#define BIT_BAT_FLT (0x1<<7)
#define BIT_TICK (0x1<<8)
#define BIT_WDT (0x1<<9)
#define BIT_TIMER0 (0x1<<10)
#define BIT_TIMER1 (0x1<<11)
#define BIT_TIMER2 (0x1<<12)
#define BIT_TIMER3 (0x1<<13)
#define BIT_TIMER4 (0x1<<14)
#define BIT_UART2 (0x1<<15)
#define BIT_LCD (0x1<<16)
#define BIT_DMA0 (0x1<<17)
#define BIT_DMA1 (0x1<<18)
#define BIT_DMA2 (0x1<<19)
#define BIT_DMA3 (0x1<<20)
#define BIT_SDI (0x1<<21)
#define BIT_SPI0 (0x1<<22)
#define BIT_UART1 (0x1<<23)
#define BIT_USBD (0x1<<25)
#define BIT_USBH (0x1<<26)
#define BIT_IIC (0x1<<27)
#define BIT_UART0 (0x1<<28)
#define BIT_SPI1 (0x1<<29)
#define BIT_RTC (0x1<<30)
#define BIT_ADC (0x1<<31)
#define BIT_ALLMSK (0xFFFFFFFF)
#define ClearPending(bit) {\
rSRCPND = bit;\
rINTPND = bit;\
rINTPND;\
}
/* Wait until rINTPND is changed for the case that the ISR is very short. */
#endif /*__S3C2410_H__*/