u-boot/include/configs/bcm_ep_board.h
Joe Hershberger ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00

109 lines
2.5 KiB
C

/*
* Copyright 2014 Broadcom Corporation.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __BCM_EP_BOARD_H
#define __BCM_EP_BOARD_H
#include <asm/arch/configs.h>
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_GENERIC_BOARD
/*
* Memory configuration
* (these must be defined elsewhere)
*/
#ifndef CONFIG_SYS_TEXT_BASE
#error CONFIG_SYS_TEXT_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_BASE
#error CONFIG_SYS_SDRAM_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_SIZE
#error CONFIG_SYS_SDRAM_SIZE must be defined!
#endif
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_STACKSIZE (256 * 1024)
/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
/*
* This is the initial SP which is used only briefly for relocating the u-boot
* image to the top of SDRAM. After relocation u-boot moves the stack to the
* proper place.
*/
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* Serial Info */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_BAUDRATE 115200
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
/* console configuration */
#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/*
* One partition type must be defined for part.c
* This is necessary for the fatls command to work on an SD card
* for example.
*/
#define CONFIG_DOS_PARTITION
/* version string, parser, etc */
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_SYS_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
/* Commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
#define CONFIG_SHA1
#define CONFIG_SHA256
/* Enable Time Command */
#define CONFIG_CMD_TIME
#define CONFIG_CMD_BOOTZ
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
#endif /* __BCM_EP_BOARD_H */