u-boot/include/configs/ti_omap5_common.h
Joe Hershberger ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00

169 lines
4.6 KiB
C

/*
* (C) Copyright 2013
* Texas Instruments Incorporated.
* Sricharan R <r.sricharan@ti.com>
*
* Derived from OMAP4 done by:
* Aneesh V <aneesh@ti.com>
*
* TI OMAP5 AND DRA7XX common configuration settings
*
* SPDX-License-Identifier: GPL-2.0+
*
* For more details, please see the technical documents listed at
* http://www.ti.com/product/omap5432
*/
#ifndef __CONFIG_TI_OMAP5_COMMON_H
#define __CONFIG_TI_OMAP5_COMMON_H
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ARCH_CPU_INIT
/* Common ARM Erratas */
#define CONFIG_ARM_ERRATA_798870
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Use General purpose timer 1 */
#define CONFIG_SYS_TIMERBASE GPT2_BASE
/*
* For the DDR timing information we can either dynamically determine
* the timings to use or use pre-determined timings (based on using the
* dynamic method. Default to the static timing infomation.
*/
#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
#endif
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PALMAS_POWER
#endif
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
#include <configs/ti_armv7_common.h>
/*
* Hardware drivers
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK 48000000
/*
* Environment setup
*/
#ifndef PARTS_DEFAULT
#define PARTS_DEFAULT
#endif
#ifndef DFUARGS
#define DFUARGS
#endif
#ifndef CONFIG_SPL_BUILD
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"console=" CONSOLEDEV ",115200n8\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
"partitions=" PARTS_DEFAULT "\0" \
"optargs=\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext4 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
"vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \
"run importbootenv;" \
"fi;" \
"if test -n $uenvcmd; then " \
"echo Running uenvcmd ...;" \
"run uenvcmd;" \
"fi;" \
"if run loadimage; then " \
"run loadfdt; " \
"echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
"bootz ${loadaddr} - ${fdtaddr}; " \
"fi;" \
"fi;\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
"setenv fdtfile omap5-uevm.dtb; fi; " \
"if test $board_name = dra7xx; then " \
"setenv fdtfile dra7-evm.dtb; fi;" \
"if test $board_name = dra72x; then " \
"setenv fdtfile dra72-evm.dtb; fi;" \
"if test $board_name = beagle_x15; then " \
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
DFUARGS \
NETARGS \
#define CONFIG_BOOTCOMMAND \
"if test ${dofastboot} -eq 1; then " \
"echo Boot fastboot requested, resetting dofastboot ...;" \
"setenv dofastboot 0; saveenv;" \
"echo Booting into fastboot ...; fastboot;" \
"fi;" \
"run findfdt; " \
"run mmcboot;" \
"setenv mmcdev 1; " \
"setenv bootpart 1:2; " \
"setenv mmcroot /dev/mmcblk0p2 rw; " \
"run mmcboot;" \
""
#endif
/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x40300000 and 0x4031E000 as a download area for OMAP5
* (dra7xx is larger, but we do not need to be larger at this time). We
* set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
* print some information.
*/
#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_DISPLAY_PRINT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
#ifdef CONFIG_NAND
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
#endif
#endif /* __CONFIG_TI_OMAP5_COMMON_H */