u-boot/include/configs/vpac270.h
Joe Hershberger ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00

327 lines
7.8 KiB
C

/*
* Voipac PXA270 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
#define CONFIG_SYS_TEXT_BASE 0xa0000000
#ifdef CONFIG_ONENAND
#define CONFIG_SPL_ONENAND_SUPPORT
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
#define CONFIG_SPL_ONENAND_LOAD_SIZE \
(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
#define CONFIG_SPL_TEXT_BASE 0x5c000000
#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds"
#endif
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"if mmc init && fatload mmc 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"if usb reset && fatload usb 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"if ide reset && fatload ide 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"bootm 0x60000;"
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_onenand=" \
"onenand erase 0x0 0x80000 ; " \
"onenand write 0xa0000000 0x0 0x80000"
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
*/
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#undef CONFIG_LCD
#define CONFIG_CMD_IDE
#ifdef CONFIG_ONENAND
#define CONFIG_CMD_ONENAND
#else
#undef CONFIG_CMD_ONENAND
#endif
/*
* Networking Configuration
* chip on the Voipac PXA270 board
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
#define DM9000_IO (CONFIG_DM9000_BASE)
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#endif
/*
* MMC Card Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#endif
/*
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE 1
/*
* Clock Configuration
*/
#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#ifdef CONFIG_RAM_256M
#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
#endif
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
#else
#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
#endif
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x80000
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000
#if defined(CONFIG_CMD_FLASH) /* NOR */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#ifdef CONFIG_RAM_256M
#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
#endif
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
#else
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_ENV_IS_IN_FLASH 1
#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ONENAND_BASE 0x00000000
#define CONFIG_ENV_IS_IN_ONENAND 1
#else /* No flash */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_NOWHERE
#endif
/*
* IDE
*/
#ifdef CONFIG_CMD_IDE
#define CONFIG_LBA48
#undef CONFIG_IDE_LED
#undef CONFIG_IDE_RESET
#define __io
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
#define CONFIG_SYS_ATA_REG_OFFSET 0x120
#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
#define CONFIG_SYS_ATA_STRIDE 2
#endif
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x01308800
#define CONFIG_SYS_GPSR1_VAL 0x00cf0000
#define CONFIG_SYS_GPSR2_VAL 0x922ac000
#define CONFIG_SYS_GPSR3_VAL 0x0161e800
#define CONFIG_SYS_GPCR0_VAL 0x00010000
#define CONFIG_SYS_GPCR1_VAL 0x0
#define CONFIG_SYS_GPCR2_VAL 0x0
#define CONFIG_SYS_GPCR3_VAL 0x0
#define CONFIG_SYS_GPDR0_VAL 0xcbb18800
#define CONFIG_SYS_GPDR1_VAL 0xfccfa981
#define CONFIG_SYS_GPDR2_VAL 0x922affff
#define CONFIG_SYS_GPDR3_VAL 0x0161e904
#define CONFIG_SYS_GAFR0_L_VAL 0x00100000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510
#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401
#define CONFIG_SYS_GAFR3_L_VAL 0x54010310
#define CONFIG_SYS_GAFR3_U_VAL 0x00025401
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x00500240
#define CONFIG_SYS_CCCR 0x02000290
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x3ffc95f9
#define CONFIG_SYS_MSC1_VAL 0x02ccf974
#define CONFIG_SYS_MSC2_VAL 0x00000000
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3
#else
#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3
#endif
#define CONFIG_SYS_MDREFR_VAL 0x201fe01e
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000001
#define CONFIG_SYS_MCMEM0_VAL 0x00014307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x0001c787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0001430f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_VOIPAC_LCD
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270"
#define CONFIG_USB_STORAGE
#endif
#endif /* __CONFIG_H */