u-boot/include/fdt_support.h
Sriram Dash b9f6786a88 drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller
Enables usb device-tree fixup code to incorporate xhci controller

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-04-10 17:18:42 +02:00

251 lines
8.2 KiB
C

/*
* (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FDT_SUPPORT_H
#define __FDT_SUPPORT_H
#ifdef CONFIG_OF_LIBFDT
#include <libfdt.h>
u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
const char *prop, const u32 dflt);
u32 fdt_getprop_u32_default(const void *fdt, const char *path,
const char *prop, const u32 dflt);
/**
* Add data to the root of the FDT before booting the OS.
*
* See doc/device-tree-bindings/root.txt
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_root(void *fdt);
/**
* Add chosen data the FDT before booting the OS.
*
* In particular, this adds the kernel command line (bootargs) to the FDT.
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_chosen(void *fdt);
/**
* Add initrd information to the FDT before booting the OS.
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
u32 val, int create);
static inline void do_fixup_by_path_string(void *fdt, const char *path,
const char *prop, const char *status)
{
do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
}
void do_fixup_by_prop(void *fdt,
const char *pname, const void *pval, int plen,
const char *prop, const void *val, int len,
int create);
void do_fixup_by_prop_u32(void *fdt,
const char *pname, const void *pval, int plen,
const char *prop, u32 val, int create);
void do_fixup_by_compat(void *fdt, const char *compat,
const char *prop, const void *val, int len, int create);
void do_fixup_by_compat_u32(void *fdt, const char *compat,
const char *prop, u32 val, int create);
/**
* Setup the memory node in the DT. Creates one if none was existing before.
* Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
* whole memory.
*
* @param blob FDT blob to update
* @param start Begin of DRAM mapping in physical memory
* @param size Size of the single memory bank
* @return 0 if ok, or -1 or -FDT_ERR_... on error
*/
int fdt_fixup_memory(void *blob, u64 start, u64 size);
/**
* Fill the DT memory node with multiple memory banks.
* Creates the node if none was existing before.
* If banks is 0, it will not touch the existing reg property. This allows
* boards to not mess with the existing DT setup, which may have been
* filled in properly before.
*
* @param blob FDT blob to update
* @param start Array of size <banks> to hold the start addresses.
* @param size Array of size <banks> to hold the size of each region.
* @param banks Number of memory banks to create. If 0, the reg
* property will be left untouched.
* @return 0 if ok, or -1 or -FDT_ERR_... on error
*/
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
void fdt_fixup_ethernet(void *fdt);
int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
/**
* Update native-mode property of display-timings node to the phandle
* of the timings matching a display by name (case insensitive).
*
* see kernel Documentation/devicetree/bindings/video/display-timing.txt
*
* @param blob FDT blob to update
* @param path path within dt
* @param display name of display timing to match
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_fixup_display(void *blob, const char *path, const char *display);
#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
void fdt_fixup_dr_usb(void *blob, bd_t *bd);
#else
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
#else
static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
#endif
#ifdef CONFIG_PCI
#include <pci.h>
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
/**
* Add board-specific data to the FDT before booting the OS.
*
* Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
* This function is called if CONFIG_OF_BOARD_SETUP is defined
*
* @param blob FDT blob to update
* @param bd_t Pointer to board data
* @return 0 if ok, or -FDT_ERR_... on error
*/
int ft_board_setup(void *blob, bd_t *bd);
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
* are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
* called at the end of the image_setup_libfdt() is to do that convertion.
*/
void ft_board_setup_ex(void *blob, bd_t *bd);
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
/**
* Add system-specific data to the FDT before booting the OS.
*
* Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
* This function is called if CONFIG_OF_SYSTEM_SETUP is defined
*
* @param blob FDT blob to update
* @param bd_t Pointer to board data
* @return 0 if ok, or -FDT_ERR_... on error
*/
int ft_system_setup(void *blob, bd_t *bd);
void set_working_fdt_addr(ulong addr);
int fdt_shrink_to_minimum(void *blob);
int fdt_increase_size(void *fdt, int add_len);
int fdt_fixup_nor_flash_size(void *blob);
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
void fdt_del_node_and_alias(void *blob, const char *alias);
u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
u64 addr);
u64 fdt_get_base_address(void *fdt, int node);
int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
uint64_t *addr, uint64_t *len);
enum fdt_status {
FDT_STATUS_OKAY,
FDT_STATUS_DISABLED,
FDT_STATUS_FAIL,
FDT_STATUS_FAIL_ERROR_CODE,
};
int fdt_set_node_status(void *fdt, int nodeoffset,
enum fdt_status status, unsigned int error_code);
static inline int fdt_status_okay(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
}
static inline int fdt_status_disabled(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
}
static inline int fdt_status_fail(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
}
int fdt_set_status_by_alias(void *fdt, const char *alias,
enum fdt_status status, unsigned int error_code);
static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
}
static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
}
static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
}
/* Helper to read a big number; size is in cells (not bytes) */
static inline u64 of_read_number(const fdt32_t *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | fdt32_to_cpu(*(cell++));
return r;
}
void of_bus_default_count_cells(void *blob, int parentoffset,
int *addrc, int *sizec);
int ft_verify_fdt(void *fdt);
int arch_fixup_memory_node(void *blob);
int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
u32 height, u32 stride, const char *format);
#endif /* ifdef CONFIG_OF_LIBFDT */
#ifdef USE_HOSTCC
int fdtdec_get_int(const void *blob, int node, const char *prop_name,
int default_val);
#endif
#endif /* ifndef __FDT_SUPPORT_H */