u-boot/drivers/usb/musb/davinci.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

75 lines
2.2 KiB
C

/*
* TI's Davinci platform specific USB wrapper functions.
*
* Copyright (c) 2008 Texas Instruments
*
* SPDX-License-Identifier: GPL-2.0+
*
* Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
*/
#ifndef __DAVINCI_USB_H__
#define __DAVINCI_USB_H__
#include <asm/arch/hardware.h>
#include "musb_core.h"
/* Base address of DAVINCI usb0 wrapper */
#define DAVINCI_USB0_BASE 0x01C64000
/* Base address of DAVINCI musb core */
#define MENTOR_USB0_BASE (DAVINCI_USB0_BASE+0x400)
/*
* Davinci platform USB wrapper register overlay. Note: Only the required
* registers are included in this structure. It can be expanded as required.
*/
struct davinci_usb_regs {
u32 version;
u32 ctrlr;
u32 reserved[0x20];
u32 intclrr;
u32 intmskr;
u32 intmsksetr;
};
#define DAVINCI_USB_TX_ENDPTS_MASK 0x1f /* ep0 + 4 tx */
#define DAVINCI_USB_RX_ENDPTS_MASK 0x1e /* 4 rx */
#define DAVINCI_USB_USBINT_SHIFT 16
#define DAVINCI_USB_TXINT_SHIFT 0
#define DAVINCI_USB_RXINT_SHIFT 8
#define DAVINCI_INTR_DRVVBUS 0x0100
#define DAVINCI_USB_USBINT_MASK 0x01ff0000 /* 8 Mentor, DRVVBUS */
#define DAVINCI_USB_TXINT_MASK \
(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
#define DAVINCI_USB_RXINT_MASK \
(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
#define MGC_BUSCTL_OFFSET(_bEnd, _bOffset) \
(0x80 + (8*(_bEnd)) + (_bOffset))
/* Integrated highspeed/otg PHY */
#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
#define USBPHY_PHY24MHZ (1 << 13)
#define USBPHY_PHYCLKGD (1 << 8)
#define USBPHY_SESNDEN (1 << 7) /* v(sess_end) comparator */
#define USBPHY_VBDTCTEN (1 << 6) /* v(bus) comparator */
#define USBPHY_PHYPLLON (1 << 4) /* override pll suspend */
#define USBPHY_CLKO1SEL (1 << 3)
#define USBPHY_OSCPDWN (1 << 2)
#define USBPHY_PHYPDWN (1 << 0)
/* Timeout for Davinci USB module */
#define DAVINCI_USB_TIMEOUT 0x3FFFFFF
/* IO Expander I2C address and VBUS enable mask */
#define IOEXP_I2C_ADDR 0x3A
#define IOEXP_VBUSEN_MASK 1
/* extern functions */
extern void lpsc_on(unsigned int id);
extern int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
extern int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
extern void enable_vbus(void);
#endif /* __DAVINCI_USB_H__ */