u-boot/examples/test_burst_lib.S
Wolfgang Denk e7670f6c1e PPC: Use r2 instead of r29 as global data pointer
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.

Use r2 instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14 22:43:22 +01:00

171 lines
4.1 KiB
ArmAsm

/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include "test_burst.h"
.text
/*
* void mmu_init(void);
*
* This function turns the MMU on
*
* Three 8 MByte regions are mapped 1:1, uncached
* - SDRAM lower 8 MByte
* - SDRAM higher 8 MByte
* - IMMR
*/
.global mmu_init
mmu_init:
tlbia /* Invalidate all TLB entries */
li r8, 0
mtspr MI_CTR, r8 /* Set instruction control to zero */
lis r8, MD_RESETVAL@h
mtspr MD_CTR, r8 /* Set data TLB control */
/* Now map the lower 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
li r8, MI_EVALID /* Create EPN for address 0 */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
li r8, MI_BOOTINIT|0x2 /* Create RPN for address 0 */
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Now map the higher 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
lwz r9,20(r2) /* gd->ram_size */
addis r9,r9,-0x80
mr r8, r9 /* Higher 8 Meg in SDRAM */
ori r8, r8, MI_EVALID /* Mark page valid */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
mr r8, r9
ori r8, r8, MI_BOOTINIT|0x2
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor
* internal registers (among other things).
*/
mfspr r9, 638 /* Get current IMMR */
andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
mr r8, r9 /* Create vaddr for TLB */
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr MD_EPN, r8
li r8, MD_PS8MEG /* Set 8M byte page */
ori r8, r8, MD_SVALID /* Make it valid */
mtspr MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
mtspr MD_RPN, r8
/* We now have the lower and higher 8 Meg mapped into TLB entries,
* and the caches ready to work.
*/
mfmsr r0
ori r0,r0,MSR_DR|MSR_IR
mtspr SRR1,r0
mflr r0
mtspr SRR0,r0
SYNC
rfi /* enables MMU */
/*
* void caches_init(void);
*/
.globl caches_init
caches_init:
sync
mfspr r3, IC_CST /* Clear error bits */
mfspr r3, DC_CST
lis r3, IDC_UNALL@h /* Unlock all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_INVALL@h /* Invalidate all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_ENABLE@h /* Enable all */
mtspr IC_CST, r3
mtspr DC_CST, r3
blr
/*
* void flush_dcache_range(unsigned long start, unsigned long stop);
*/
.global flush_dcache_range
flush_dcache_range:
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
1: dcbf 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbf's to get to ram */
blr
/*
* void disable_interrupts(void);
*/
.global disable_interrupts
disable_interrupts:
mfmsr r0
rlwinm r0,r0,0,17,15
mtmsr r0
blr