u-boot/board/freescale/ls1043ardb
Simon Glass 73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
..
cpld.c armv8/ls1043ardb: Add sd boot support 2015-10-29 10:34:02 -07:00
cpld.h armv8/ls1043ardb: Add sd boot support 2015-10-29 10:34:02 -07:00
ddr.c armv8: fsl-layerscape: Make DDR non secure in MMU tables 2015-12-15 08:57:33 +08:00
ddr.h armv8/ls1043ardb: Add LS1043ARDB board support 2015-10-29 10:34:01 -07:00
eth.c armv8/ls1043a: Add Fman support 2015-10-29 10:34:01 -07:00
Kconfig armv8/ls1043ardb: Add LS1043ARDB board support 2015-10-29 10:34:01 -07:00
ls1043ardb.c Kconfig: Move CONFIG_FIT and related options to Kconfig 2016-03-14 19:18:07 -04:00
ls1043ardb_pbi.cfg armv8/ls1043ardb: Add nand boot support 2015-10-29 10:34:01 -07:00
ls1043ardb_rcw_nand.cfg armv8/ls1043ardb/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
ls1043ardb_rcw_sd.cfg armv8/ls1043ardb/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
MAINTAINERS armv8/ls1043ardb: add SECURE BOOT target for NOR 2015-12-15 08:57:35 +08:00
Makefile armv8/ls1043a: Add Fman support 2015-10-29 10:34:01 -07:00
README armv8/ls1043ardb: Add sd boot support 2015-10-29 10:34:02 -07:00

Overview
--------
The LS1043A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043ARDB provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.

LS1043A SoC Overview
--------------------
The LS1043A integrated multicore processor combines four ARM Cortex-A53
processor cores with datapath acceleration optimized for L2/3 packet
processing, single pass security offload and robust traffic management
and quality of service.

The LS1043A SoC includes the following function and features:
 - Four 64-bit ARM Cortex-A53 CPUs
 - 1 MB unified L2 Cache
 - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
   support
 - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
   the following functions:
   - Packet parsing, classification, and distribution (FMan)
   - Queue management for scheduling, packet sequencing, and congestion
     management (QMan)
   - Hardware buffer management for buffer allocation and de-allocation (BMan)
   - Cryptography acceleration (SEC)
 - Ethernet interfaces by FMan
   - Up to 1 x XFI supporting 10G interface
   - Up to 1 x QSGMII
   - Up to 4 x SGMII supporting 1000Mbps
   - Up to 2 x SGMII supporting 2500Mbps
   - Up to 2 x RGMII supporting 1000Mbps
 - High-speed peripheral interfaces
   - Three PCIe 2.0 controllers, one supporting x4 operation
   - One serial ATA (SATA 3.0) controllers
 - Additional peripheral interfaces
   - Three high-speed USB 3.0 controllers with integrated PHY
   - Enhanced secure digital host controller (eSDXC/eMMC)
   - Quad Serial Peripheral Interface (QSPI) Controller
   - Serial peripheral interface (SPI) controller
   - Four I2C controllers
   - Two DUARTs
   - Integrated flash controller supporting NAND and NOR flash
 - QorIQ platform's trust architecture 2.1

 LS1043ARDB board Overview
 -----------------------
 - SERDES Connections, 4 lanes supporting:
      - PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and
        standard PCIe card
      - QSGMII with x4 RJ45 connector
      - XFI with x1 RJ45 connector
 - DDR Controller
     - 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s
 -IFC/Local Bus
    - One 128MB NOR flash 16-bit data bus
    - One 512 MB NAND flash with ECC support
    - CPLD connection
 - USB 3.0
    - Two super speed USB 3.0 Type A ports
 - SDHC: connects directly to a full SD/MMC slot
 - DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
 - 4 I2C controllers
 - UART
   - Two 4-pin serial ports at up to 115.2 Kbit/s
   - Two DB9 D-Type connectors supporting one Serial port each
 - ARM JTAG support

Memory map from core's view
----------------------------
Start Address	End Address	Description		Size
0x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
0x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
0x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
0x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
0x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
0x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
0x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
0x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
0x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB

Booting Options
---------------
a) NOR boot
b) NAND boot
c) SD boot