u-boot/board/freescale/t4rdb
Ying Zhang 2f66a828f7 powerpc/board/t4240rdb: Enable VID support
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory. These values
define the voltage requirements for the chip. u-boot reads
FUSESR and translates the values into the appropriate
commands to set the voltage output value of an external
voltage regulator.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:38:05 -08:00
..
cpld.c powerpc/t4rdb: fix cpld reset altbank 2015-07-28 14:41:15 -07:00
cpld.h powerpc/t4rdb: Add support of CPLD 2014-11-14 11:12:14 -08:00
ddr.c powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
ddr.h powerpc/85xx: Add T4240RDB board support 2014-05-13 08:24:32 -07:00
eth.c net: Move some header files to include/ 2015-10-29 10:34:00 -07:00
Kconfig kconfig: remove redundant "string" type in arch and board Kconfigs 2014-09-13 16:43:55 -04:00
law.c powerpc/t4rdb: Add support of CPLD 2014-11-14 11:12:14 -08:00
MAINTAINERS powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
Makefile powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
pci.c powerpc/85xx: Add T4240RDB board support 2014-05-13 08:24:32 -07:00
spl.c Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
t4_pbi.cfg powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
t4_rcw.cfg powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
t4rdb.h powerpc/85xx: Add T4240RDB board support 2014-05-13 08:24:32 -07:00
t4240rdb.c powerpc/board/t4240rdb: Enable VID support 2016-01-25 12:38:05 -08:00
tlb.c powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00