u-boot/Makefile
Wolfgang Denk eca3aeb352 Licenses: introduce SPDX Unique Lincense Identifiers
Like many other projects, U-Boot has a tradition of including big
blocks of License headers in all files.  This not only blows up the
source code with mostly redundant information, but also makes it very
difficult to generate License Clearing Reports.  An additional problem
is that even the same lincenses are referred to by a number of
slightly varying text blocks (full, abbreviated, different
indentation, line wrapping and/or white space, with obsolete address
information, ...) which makes automatic processing a nightmare.

To make this easier, such license headers in the source files will be
replaced with a single line reference to Unique Lincense Identifiers
as defined by the Linux Foundation's SPDX project [1].  For example,
in a source file the full "GPL v2.0 or later" header text will be
replaced by a single line:

        SPDX-License-Identifier:        GPL-2.0+

We use the SPDX Unique Lincense Identifiers here; these are available
at [2].

Note: From the legal point of view, this patch is supposed to be only
a change to the textual representation of the license information,
but in no way any change to the actual license terms. With this patch
applied, all files will still be licensed under the same terms they
were before.

Note 2: The apparent difference between the old "COPYING" and the new
"Licenses/gpl-2.0.txt" only results from switching to the upstream
version of the license which is differently formatted; there are not
any actual changes to the content.

Note 3: There are some recurring questions about linense issues, such
as:
    - Is a "All Rights Reserved" clause a problem in GPL code?
    - Are files without any license header a problem?
    - Do we need license headers at all?

The following excerpt from an e-mail by Daniel B. Ravicher should help
with these:

| Message-ID: <4ADF8CAA.5030808@softwarefreedom.org>
| Date: Wed, 21 Oct 2009 18:35:22 -0400
| From: "Daniel B. Ravicher" <ravicher@softwarefreedom.org>
| To: Wolfgang Denk <wd@denx.de>
| Subject: Re: GPL and license cleanup questions
|
| Mr. Denk,
|
| Wolfgang Denk wrote:
| > - There are a number of files which do not include any specific
| > license information at all. Is it correct to assume that these files
| > are automatically covered by the "GPL v2 or later" clause as
| > specified by the COPYING file in the top level directory of the
| > U-Boot source tree?
|
| That is a very fact specific analysis and could be different across the
| various files.  However, if the contributor could reasonably be expected
| to have known that the project was licensed GPLv2 or later at the time
| she made her contribution, then a reasonably implication is that she
| consented to her contributions being distributed under those terms.
|
| > - Do such files need any clean up, for example should we add GPL
| > headers to them, or is this not needed?
|
| If the project as a whole is licensed under clear terms, you need not
| identify those same terms in each file, although there is no harm in
| doing so.
|
| > - There are other files, which include both a GPL license header
| > _plus_ some copyright note with an "All Rights Reserved" clause. It
| > has been my understanding that this is a conflict, and me must ask
| > the copyright holders to remove such "All Rights Reserved" clauses.
| > But then, some people claim that "All Rights Reserved" is a no-op
| > nowadays. License checking tools (like OSLC) seem to indicate this is
| > a problem, but then we see quite a lot of "All rights reserved" in
| > BSD-licensed files in gcc and glibc. So what is the correct way to
| > deal with such files?
|
| It is not a conflict to grant a license and also reserve all rights, as
| implicit in that language is that you are reserving all "other" rights
| not granted in the license.  Thus, a file with "Licensed under GPL, All
| Rights Reserved" would mean that it is licensed under the GPL, but no
| other rights are given to copy, modify or redistribute it.
|
| Warm regards,
| --Dan
|
| Daniel B. Ravicher, Legal Director
| Software Freedom Law Center (SFLC) and Moglen Ravicher LLC
| 1995 Broadway, 17th Fl., New York, NY 10023
| (212) 461-1902 direct  (212) 580-0800 main  (212) 580-0898 fax
| ravicher@softwarefreedom.org   www.softwarefreedom.org

[1] http://spdx.org/
[2] http://spdx.org/licenses/

Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-07-24 09:44:16 -04:00

888 lines
28 KiB
Makefile

#
# (C) Copyright 2000-2013
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
VERSION = 2013
PATCHLEVEL = 07
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/generated/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/x86/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/ppc64/powerpc/ \
-e s/ppc/powerpc/ \
-e s/macppc/powerpc/\
-e s/sh.*/sh/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#
ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
# Use 'make C=1' to enable checking of re-compiled files.
#
# See the linux kernel file "Documentation/sparse.txt" for more details,
# including where to get the "sparse" utility.
ifdef C
ifeq ("$(origin C)", "command line")
CHECKSRC := $(C)
endif
endif
ifndef CHECKSRC
CHECKSRC = 0
endif
export CHECKSRC
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SPLTREE := $(OBJTREE)/spl
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE SPLTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD := 1
export REMOTE_BUILD
endif
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src
# Make sure CDPATH settings don't interfere
unexport CDPATH
#########################################################################
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
# is "yes"), so compile examples after U-Boot is compiled.
SUBDIR_TOOLS = tools
SUBDIR_EXAMPLES = examples/standalone examples/api
SUBDIRS = $(SUBDIR_TOOLS)
.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# Include autoconf.mk before config.mk so that the config options are available
# to all top level build files. We need the dummy all: target to prevent the
# dependency target in autoconf.mk.dep from being the default.
all:
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
ifndef CONFIG_SANDBOX
SUBDIRS += $(SUBDIR_EXAMPLES)
endif
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif
# load other configuration
include $(TOPDIR)/config.mk
# Targets which don't build the source code
NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
# Only do the generic board check when actually building, not configuring
ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
ifeq ($(findstring _config,$(MAKECMDGOALS)),)
$(CHECK_GENERIC_BOARD)
endif
endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
ifndef LDSCRIPT
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
endif
endif
# If there is no specified link script, we look in a number of places for it
ifndef LDSCRIPT
ifeq ($(CONFIG_NAND_U_BOOT),y)
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
endif
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
# We don't expect a Makefile here
LDSCRIPT_MAKEFILE_DIR =
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif
endif
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = $(CPUDIR)/start.o
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += $(CPUDIR)/resetvec.o
endif
OBJS := $(addprefix $(obj),$(OBJS))
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
LIBS-y += lib/libgeneric.o
LIBS-y += lib/rsa/librsa.o
LIBS-y += lib/lzma/liblzma.o
LIBS-y += lib/lzo/liblzo.o
LIBS-y += lib/zlib/libz.o
LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o
LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
LIBS-y += $(CPUDIR)/lib$(CPU).o
ifdef SOC
LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
LIBS-y += drivers/net/npe/libnpe.o
endif
LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
LIBS-y += fs/libfs.o \
fs/cbfs/libcbfs.o \
fs/cramfs/libcramfs.o \
fs/ext4/libext4fs.o \
fs/fat/libfat.o \
fs/fdos/libfdos.o \
fs/jffs2/libjffs2.o \
fs/reiserfs/libreiserfs.o \
fs/sandbox/libsandboxfs.o \
fs/ubifs/libubifs.o \
fs/yaffs2/libyaffs2.o \
fs/zfs/libzfs.o
LIBS-y += net/libnet.o
LIBS-y += disk/libdisk.o
LIBS-y += drivers/bios_emulator/libatibiosemu.o
LIBS-y += drivers/block/libblock.o
LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
LIBS-y += drivers/crypto/libcrypto.o
LIBS-y += drivers/dma/libdma.o
LIBS-y += drivers/fpga/libfpga.o
LIBS-y += drivers/gpio/libgpio.o
LIBS-y += drivers/hwmon/libhwmon.o
LIBS-y += drivers/i2c/libi2c.o
LIBS-y += drivers/input/libinput.o
LIBS-y += drivers/misc/libmisc.o
LIBS-y += drivers/mmc/libmmc.o
LIBS-y += drivers/mtd/libmtd.o
LIBS-y += drivers/mtd/nand/libnand.o
LIBS-y += drivers/mtd/onenand/libonenand.o
LIBS-y += drivers/mtd/ubi/libubi.o
LIBS-y += drivers/mtd/spi/libspi_flash.o
LIBS-y += drivers/net/libnet.o
LIBS-y += drivers/net/phy/libphy.o
LIBS-y += drivers/pci/libpci.o
LIBS-y += drivers/pcmcia/libpcmcia.o
LIBS-y += drivers/power/libpower.o \
drivers/power/fuel_gauge/libfuel_gauge.o \
drivers/power/pmic/libpmic.o \
drivers/power/battery/libbattery.o
LIBS-y += drivers/spi/libspi.o
LIBS-y += drivers/dfu/libdfu.o
ifeq ($(CPU),mpc83xx)
LIBS-y += drivers/qe/libqe.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
LIBS-y += drivers/qe/libqe.o
LIBS-y += drivers/net/fm/libfm.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc86xx)
LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
LIBS-y += drivers/rtc/librtc.o
LIBS-y += drivers/serial/libserial.o
LIBS-y += drivers/sound/libsound.o
LIBS-y += drivers/tpm/libtpm.o
LIBS-y += drivers/twserial/libtws.o
LIBS-y += drivers/usb/eth/libusb_eth.o
LIBS-y += drivers/usb/gadget/libusb_gadget.o
LIBS-y += drivers/usb/host/libusb_host.o
LIBS-y += drivers/usb/musb/libusb_musb.o
LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
LIBS-y += drivers/usb/phy/libusb_phy.o
LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
LIBS-y += drivers/video/libvideo.o
LIBS-y += drivers/watchdog/libwatchdog.o
LIBS-y += common/libcommon.o
LIBS-y += lib/libfdt/libfdt.o
LIBS-y += api/libapi.o
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
ifeq ($(SOC),s5pc1xx)
LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
endif
ifeq ($(SOC),exynos)
LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
endif
ifneq ($(CONFIG_TEGRA),)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
endif
LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
.PHONY : $(LIBS)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
-DCPUDIR=$(CPUDIR) \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
#########################################################################
#########################################################################
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK = \
@actual=`wc -c $@ | awk '{print $$1}'`; \
limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
if test $$actual -gt $$limit; then \
echo "$@ exceeds file size limit:" >&2 ; \
echo " limit: $$limit bytes" >&2 ; \
echo " actual: $$actual bytes" >&2 ; \
echo " excess: $$((actual - limit)) bytes" >&2; \
exit 1; \
fi
else
BOARD_SIZE_CHECK =
endif
# Always append ALL so that arch config.mk's can add custom ones
ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
ifneq ($(CONFIG_SPL_TARGET),)
ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
endif
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_OF_SEPARATE),y)
ALL-y += $(obj)u-boot-dtb-tegra.bin
else
ALL-y += $(obj)u-boot-nodtb-tegra.bin
endif
endif
all: $(ALL-y) $(SUBDIR_EXAMPLES)
$(obj)u-boot.dtb: $(obj)u-boot
$(MAKE) -C dts binary
mv $(obj)dts/dt.dtb $@
$(obj)u-boot-dtb.bin: $(obj)u-boot.bin $(obj)u-boot.dtb
cat $^ >$@
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(BOARD_SIZE_CHECK)
$(obj)u-boot.ldr: $(obj)u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
#
# U-Boot entry point, needed for booting of full-blown U-Boot
# from the SPL U-Boot version.
#
ifndef CONFIG_SYS_UBOOT_START
CONFIG_SYS_UBOOT_START := 0
endif
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
-e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin depend
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(obj)u-boot.pbl: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
-d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
$(OBJTREE)/u-boot-with-spl.imx
$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
$(OBJTREE)/u-boot-with-nand-spl.imx
$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
$(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
-T aisimage \
-e $(CONFIG_SPL_TEXT_BASE) \
-d $(obj)spl/u-boot-spl.bin \
$(obj)spl/u-boot-spl.ais
$(OBJCOPY) ${OBJCFLAGS} -I binary \
--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
$(obj)u-boot.ais
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
$(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
# bootloader can check its integrity. Padding needs to be done to the
# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
# The resulting image containing both U-Boot images is called u-boot.spr
$(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
-d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
conv=notrunc 2>/dev/null
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
ifneq ($(CONFIG_TEGRA),)
$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
ifeq ($(CONFIG_OF_SEPARATE),y)
$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
endif
endif
$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
# PPC4xx needs the SPL at the end of the image, since the reset vector
# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
# and need to introduce a new build target with the full blown U-Boot
# at the start padded up to the start of the SPL image. And then concat
# the SPL image to the end.
$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
of=$(obj)u-boot-pad.img 2>/dev/null
dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
conv=notrunc 2>/dev/null
cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
-Wl,--start-group $(__LIBS) -Wl,--end-group \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
$(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
$(obj)u-boot: depend \
$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
-c common/system_map.c -o $(obj)common/system_map.o
$(GEN_UBOOT) $(obj)common/system_map.o
endif
$(OBJS): depend
$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(SUBDIR_TOOLS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): depend
$(MAKE) -C $@ all
$(SUBDIR_EXAMPLES): $(obj)u-boot
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all
updater:
$(MAKE) -C tools/updater all
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h \
$(obj)include/generated/asm-offsets.h
for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
$(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include
FIND := find
FINDFLAGS := -L
checkstack:
$(CROSS_COMPILE)objdump -d $(obj)u-boot \
`$(FIND) $(obj) -name u-boot-spl -print` | \
perl $(src)tools/checkstack.pl $(ARCH)
tags ctags:
ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
etags:
etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
cscope:
$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
cscope.files
cscope -b -q -k
SYSTEM_MAP = \
$(NM) $1 | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
LC_ALL=C sort
$(obj)System.map: $(obj)u-boot
@$(call SYSTEM_MAP,$<) > $(obj)System.map
checkthumb:
@if test $(call cc-version) -lt 0404; then \
echo -n '*** Your GCC does not produce working '; \
echo 'binaries in THUMB mode.'; \
echo '*** Your board is configured for THUMB mode.'; \
false; \
fi
# GCC 3.x is reported to have problems generating the type of relocation
# that U-Boot wants.
# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
checkgcc4:
@if test $(call cc-version) -lt 0400; then \
echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
false; \
fi
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
mv $@.tmp $@
$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
$(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-o $@ $(src)lib/asm-offsets.c -c -S
$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep
@mkdir -p $(obj)$(CPUDIR)/$(SOC)
if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
$(CC) -DDO_DEPS_ONLY \
$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-o $@ $(src)$(CPUDIR)/$(SOC)/asm-offsets.c -c -S; \
else \
touch $@; \
fi
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) \
updater depend dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
$(MAKE) -C $@ all
endif # config.mk
# ARM relocations should all be R_ARM_RELATIVE.
checkarmreloc: $(obj)u-boot
@if test "R_ARM_RELATIVE" != \
"`$(CROSS_COMPILE)readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
then echo "$< contains relocations other than \
R_ARM_RELATIVE"; false; fi
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
printf '#define PLAIN_VERSION "%s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
) > $@.tmp
@( printf '#define CC_VERSION_STRING "%s"\n' \
'$(shell $(CC) --version | head -n 1)' )>> $@.tmp
@( printf '#define LD_VERSION_STRING "%s"\n' \
'$(shell $(LD) -v | head -n 1)' )>> $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
$(TIMESTAMP_FILE):
@mkdir -p $(dir $(TIMESTAMP_FILE))
@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@.tmp
@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
easylogo env gdb:
$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
gdbtools: gdb
xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
$(MAKE) -C tools HOST_TOOLS_ALL=y
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
%_config:: unconfig
@$(MKCONFIG) -A $(@:_config=)
sinclude $(obj).boards.depend
$(obj).boards.depend: boards.cfg
@awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
#
# Functions to generate common board directory names
#
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
#########################################################################
#########################################################################
clean:
@rm -f $(obj)examples/standalone/82559_eeprom \
$(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/eepro100_eeprom \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)examples/standalone/mem_to_mem_idma2intr \
$(obj)examples/standalone/sched \
$(obj)examples/standalone/smc911{11,x}_eeprom \
$(obj)examples/standalone/test_burst \
$(obj)examples/standalone/timer
@rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{smdk5250,}spl \
$(obj)tools/mxsboot \
$(obj)tools/ncb $(obj)tools/ubsha1 \
$(obj)tools/kernel-doc/docproc \
$(obj)tools/proftool
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)include/bmp_logo_data.h
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \
-o -name '*.cfgtmp' \) -print \
| xargs rm -f
# Removes everything not needed for testing u-boot
tidy: clean
@find $(OBJTREE) -type f \( -name '*.depend*' \) -print | xargs rm -f
clobber: tidy
@find $(OBJTREE) -type f \( -name '*.srec' \
-o -name '*.bin' -o -name u-boot.img \) \
-print0 | xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.pbl
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot-with-spl.imx
@rm -f $(obj)u-boot-with-nand-spl.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
@rm -f $(obj)u-boot.bd
@rm -f $(obj)u-boot.spr
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
@rm -f $(obj)spl/u-boot-spl.lds
@rm -f $(obj)MLO MLO.byteswap
@rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@rm -f $(obj)dts/*.tmp
@rm -f $(obj)spl/u-boot-spl{,-pad}.ais
mrproper \
distclean: clobber unconfig
ifneq ($(OBJTREE),$(SRCTREE))
rm -rf $(obj)*
endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################