u-boot/drivers/spi/kirkwood_spi.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

215 lines
4.7 KiB
C

/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* Derived from drivers/spi/mpc8xxx_spi.c
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
#include <asm/io.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/spi.h>
#include <asm/arch/mpp.h>
static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE;
u32 cs_spi_mpp_back[2];
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct spi_slave *slave;
u32 data;
static const u32 kwspi_mpp_config[2][2] = {
{ MPP0_SPI_SCn, 0 }, /* if cs == 0 */
{ MPP7_SPI_SCn, 0 } /* if cs != 0 */
};
if (!spi_cs_is_valid(bus, cs))
return NULL;
slave = spi_alloc_slave_base(bus, cs);
if (!slave)
return NULL;
writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl);
/* calculate spi clock prescaller using max_hz */
data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
/* program spi clock prescaller using max_hz */
writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
debug("data = 0x%08x \n", data);
writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
writel(KWSPI_IRQMASK, &spireg->irq_mask);
/* program mpp registers to select SPI_CSn */
kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
return slave;
}
void spi_free_slave(struct spi_slave *slave)
{
kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
free(slave);
}
#if defined(CONFIG_SYS_KW_SPI_MPP)
u32 spi_mpp_backup[4];
#endif
__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
{
return 0;
}
int spi_claim_bus(struct spi_slave *slave)
{
#if defined(CONFIG_SYS_KW_SPI_MPP)
u32 config;
u32 spi_mpp_config[4];
config = CONFIG_SYS_KW_SPI_MPP;
if (config & MOSI_MPP6)
spi_mpp_config[0] = MPP6_SPI_MOSI;
else
spi_mpp_config[0] = MPP1_SPI_MOSI;
if (config & SCK_MPP10)
spi_mpp_config[1] = MPP10_SPI_SCK;
else
spi_mpp_config[1] = MPP2_SPI_SCK;
if (config & MISO_MPP11)
spi_mpp_config[2] = MPP11_SPI_MISO;
else
spi_mpp_config[2] = MPP3_SPI_MISO;
spi_mpp_config[3] = 0;
spi_mpp_backup[3] = 0;
/* set new spi mpp and save current mpp config */
kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
#endif
return board_spi_claim_bus(slave);
}
__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
{
}
void spi_release_bus(struct spi_slave *slave)
{
#if defined(CONFIG_SYS_KW_SPI_MPP)
kirkwood_mpp_conf(spi_mpp_backup, NULL);
#endif
board_spi_release_bus(slave);
}
#ifndef CONFIG_SPI_CS_IS_VALID
/*
* you can define this function board specific
* define above CONFIG in board specific config file and
* provide the function in board specific src file
*/
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return (bus == 0 && (cs == 0 || cs == 1));
}
#endif
void spi_init(void)
{
}
void spi_cs_activate(struct spi_slave *slave)
{
writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
unsigned int tmpdout, tmpdin;
int tm, isread = 0;
debug("spi_xfer: slave %u:%u dout %p din %p bitlen %u\n",
slave->bus, slave->cs, dout, din, bitlen);
if (flags & SPI_XFER_BEGIN)
spi_cs_activate(slave);
/*
* handle data in 8-bit chunks
* TBD: 2byte xfer mode to be enabled
*/
writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) |
KWSPI_XFERLEN_1BYTE), &spireg->cfg);
while (bitlen > 4) {
debug("loopstart bitlen %d\n", bitlen);
tmpdout = 0;
/* Shift data so it's msb-justified */
if (dout)
tmpdout = *(u32 *) dout & 0x0ff;
writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause);
writel(tmpdout, &spireg->dout); /* Write the data out */
debug("*** spi_xfer: ... %08x written, bitlen %d\n",
tmpdout, bitlen);
/*
* Wait for SPI transmit to get out
* or time out (1 second = 1000 ms)
* The NE event must be read and cleared first
*/
for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) {
isread = 1;
tmpdin = readl(&spireg->din);
debug
("spi_xfer: din %p..%08x read\n",
din, tmpdin);
if (din) {
*((u8 *) din) = (u8) tmpdin;
din += 1;
}
if (dout)
dout += 1;
bitlen -= 8;
}
if (isread)
break;
}
if (tm >= KWSPI_TIMEOUT)
printf("*** spi_xfer: Time out during SPI transfer\n");
debug("loopend bitlen %d\n", bitlen);
}
if (flags & SPI_XFER_END)
spi_cs_deactivate(slave);
return 0;
}